This experimental study reports on the stability and thermal conductivity enhancement of carbon nanotubes (CNTs) nanofluids with and without gum arabic (GA). The stability of CNT in the presence of GA dispersant in water is systematically investigated by taking into account the combined effect of various parameters, such as sonication time, temperature, dispersant and particle concentration. The concentrations of CNT and GA have been varied from 0.01 to 0.1 wt% and from 0.25 to 5 wt%, respectively, and the sonication time has been varied in between 1 and 24 h. The stability of nanofluid is measured in terms of CNT concentration as a function of sediment time using UV-Vis spectrophotometer. Thermal conductivity of CNT nanofluids is measured using KD-2 prothermal conductivity meter from 25 to 60°C. Optimum GA concentration is obtained for the entire range of CNT concentration and 1–2.5 wt% of GA is found to be sufficient to stabilise all CNT range in water. Rapid sedimentation of CNTs is observed at higher GA concentration and sonication time. CNT in aqueous suspensions show strong tendency to aggregation and networking into clusters. Stability and thermal conductivity enhancement of CNT nanofluids have been presented to provide a heat transport medium capable of achieving high heat conductivity. Increase in CNT concentrations resulted in the non-linear thermal conductivity enhancement. More than 100–250% enhancement in thermal conductivity is observed for the range of CNT concentration and temperature.
Proton exchange membranes (PEMs) play a pivotal role in fuel cells; conducting protons from the anode to the cathode within the cell’s membrane electrode assembles (MEA) separates the reactant fuels and prevents electrons from passing through. High proton conductivity is the most important characteristic of the PEM, as this contributes to the performance and efficiency of the fuel cell. However, it is also important to take into account the membrane’s durability to ensure that it canmaintain itsperformance under the actual fuel cell’s operating conditions and serve a long lifetime. The current state-of-the-art Nafion membranes are limited due to their high cost, loss of conductivity at elevated temperatures due to dehydration, and fuel crossover. Alternatives to Nafion have become a well-researched topic in recent years. Aromatic-based membranes where the polymer chains are linked together by aromatic rings, alongside varying numbers of ether, ketone, or sulfone functionalities, imide, or benzimidazoles in their structures, are one of the alternatives that show great potential as PEMs due totheir electrochemical, mechanical, and thermal strengths. Membranes based on these polymers, such as poly(aryl ether ketones) (PAEKs) and polyimides (PIs), however, lack a sufficient level of proton conductivity and durability to be practical for use in fuel cells. Therefore, membrane modifications are necessary to overcome their drawbacks. This paper reviews the challenges associated with different types of aromatic-based PEMs, plus the recent approaches that have been adopted to enhance their properties and performance.
Green hydrogen production via electrocatalytic water splitting paves the way for renewable, clean, and sustainable hydrogen (H2) generation. H2 gas is produced from the cathodic hydrogen evolution reaction (HER), where the reaction is catalyzed primarily from Pt-based catalysts under both acidic and alkaline environments. Lowering the loading of Pt and the search for alternative active catalysts for HER is still an ongoing challenge. Two-dimensional MXenes are effective supports to stabilize and homogenously distribute HER-active electrocatalysts to boost the HER performance. Factors involved in the effectiveness of MXenes for their role in HER include transition metal types and termination groups. Recently, tailoring the conditions during the synthesis of MXenes has made it possible to tune the morphology of MXenes from multilayers to few layers (delaminated), formation of porous MXenes, and those with unique crumpled and rolled structures. Changing the morphology of MXenes alters the surface area, exposed active sites and accessibility of electrolyte materials/ions to these active sites. This review provides insight into the effects of varying morphology of MXenes towards the electrocatalytic HER activity of the MXene itself and MXene composites/hybrids with HER-active catalysts. Synthesis methods to obtain the different MXene morphologies are also summarized.
Transformer oil is refined electrical insulating oil, which is extremely stable at high temperatures and possesses excellent electrical insulating properties. These special types of oils are widely used in high voltage apparatus such as power transformers, high voltage capacitors and circuit breakers. Traditionally, mineral oils have been most commonly used as a coolant or as electrical insulation medium. However, the main concern related to mineral oil is overheating, overloading, short circuits that reduce the shelf life of the transformer unit and restrict its function as a reliable coolant. Moreover, other factors such as high electrical insulation requirements, safety and economic aspects need to be considered for the development of new insulating liquid material. Nanofluids have become the one of the alternatives for the existing products available in the market because of its high thermo-physical and good dielectric properties. This review focuses on the status of nanofluids, the effect of different nanoparticles to enhance the dielectric as well as its heat transfer properties of nanofluids. The thermo-physical properties of the newly developed transformer oil based nanofluids reported in comparison with different oils. Finally, future directions and challenges need to be addressed.