Reforming of natural gas with steam represents the most energy-intensive part of ammonia production. An integrated numerical model for calculating composition of primary reforming products with cross-checking of outlet methane molar concentration, heat duty, maximum tube wall temperature, tube pressure drops, and approach to equilibrium was set up involving production parameters. In particular, the model was used for continuous monitoring and optimization of a steam methane reformer (SMR) catalyst in ammonia production. The calculations involve the solution of material and energy balance equations along with reaction kinetic expressions. Open source code based on Matlab file was used for modelling and calculation of various physical properties of the reacting gases. One of the main contributions is development of the rapid integrated method for data exchange between any distributed control system (DCS) and the model to accomplish continuous monitoring and optimization of SMR catalyst and reformer tubes. Integrated memory block was proposed for rapid synchronization between commercial DCS with the model solver. The developed model was verified with the industrial top-fired SMR unit in ammonia production located in Petrokemija, Croatia. Practical application of proposed solution can ensure overall energy savings of up to 3% in ammonia production.
3 March 2021 in International Journal of Sustainable Energy
The Digital Twin concept undoubtedly emerges in different industries as a must-have option for improving energy efficiency, increase maintenance reliability, prevent environmental pollution, and mitigating safety issues. However, there is still no suitable solution specifically developed for continuous monitoring and optimisation of the complex process units such as steam methane reforming (SMR) furnace used in ammonia production. The current work addresses this problem with the main goal to save energy and reduce carbon footprint. The paper investigates the application of the Digital Twin concept in combination with already proven methods for the identification and optimisation of energy-saving opportunities and reduction of CO2 emissions. The results are total energy saving between 3 and 4% with CO2 reduction of approximately 0.890 tons/h.
20 August 2025 in Reaction Kinetics, Mechanisms and Catalysis