AGUERATA KABORE

Dr. AGUERATA KABORE

Génie de Construction, École de Technologie Supérieure, Montréal, Quebec, Canada
orcid
Ph.D student

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 February 2024 in Materials
Verified
Journal Article
Open access
PDF file
AKAGUERATA KABORE
AGUERATA KABORE
Claudiane Ouellet-PlamondonClaudiane Ouellet-Plamondon
Claudiane Ouellet-Plamondon
This study examined the shrinkage rate and mechanical properties of cob samples. Cob is a natural building material composed of clay, water, and varying amounts of plant fibres. The red and beige cob materials in this study containing 3% and 6% wheat fibres were manufactured by hand with clay, bulk fibres (short and long fibres), and a 25% water ratio (water/clay) in order to make their manufacture and use on construction sites feasible and simple. The reference samples were mixed with clay, 25% water, and 0% wheat fibre. The mechanical properties were assessed through compression and flexural tests after 28 and 120 days. The results showed that the fibre addition decreased the bulk density of the composites from 1902 kg/m3 to 1264 kg/m3. The compressive strength increased from 1.8 MPa to 4.57 MPa for the red clay samples and from 1.65 MPa to 4.61 MPa for the beige clay samples at 28 days. The compressive strength of each mixture decreased slightly with age for the red and beige clay samples, respectively. Conversely, the flexural strength increased with age for the samples reinforced with 3% and 6% fibres. The results also showed that the cob samples can deform without breaking. Increasing the fibre content in the mix resulted in a significant reduction in the shrinkage rate and an increase in the mass loss rate during thermogravimetric analysis. This analysis showed a total mass loss of approximately 5.64%, 6.12%, and 44.87% for the red clay, beige clay, and fibres, respectively. An average volume shrinkage of 1% was observed for the samples with 6% fibre content. The cob discussed in this article can be used as a filling material. In large quantities, it can be made by hand, with feet protected by boots, or with the use of a mixer. The environmental benefits are considerable, as the raw materials are renewable, and the manufacturing process is less energy-intensive.

4 April 2024 in Energies
Verified
Journal Article
Open access
PDF file
AKAGUERATA KABORE
AGUERATA KABORE
WMWahid Maref
Wahid Maref
Claudiane Ouellet-PlamondonClaudiane Ouellet-Plamondon
Claudiane Ouellet-Plamondon
The search for environmentally friendly and low-carbon-footprint construction materials continues progressively. Researchers are now interested in innovative materials that connect with the principles of sustainable construction, and materials such as hemp concrete prove to be promising. This article presents the results of a study that aimed to evaluate the hygrothermal performance of hemp concrete integrated into the building envelope using the hygrothermal tool WUFI Pro 6.2. The simulation model was compared and verified with existing models before its utilization for this study. The results of this verification were in good agreement, which gave us more confidence in its application for further parametric studies of building envelopes in hot climate zones. Three wall systems were simulated: (i) a wall system with hemp concrete, (ii) a compressed earth block wall, and (iii) a cement block wall. The most important variables used in the simulations were the hygrothermal properties of the materials or wall components and the incident solar radiation. The simulation results showed that hemp concrete has good thermal performance and temperature and humidity regulation capabilities of the building envelope. The interior surface temperatures of the hemp concrete walls were between 22.1 °C and 24.6 °C compared to the compressed earth block and cement block walls, where the surface temperatures were between 22.0 °C and 27 °C and between 21.2 °C and 28.7 °C, respectively, and between 23 °C and 45 °C for the exterior temperatures. These values remain the same with the increase in exterior temperatures for hemp concrete walls. In conclusion, hemp concrete could be a great alternative material for use in construction for hot climate zones.

11 June 2023
Verified
Book Chapter
Closed access
PDF file
Claudiane Ouellet-PlamondonClaudiane Ouellet-Plamondon
Claudiane Ouellet-Plamondon
AKAGUERATA KABORE
AGUERATA KABORE


14 December 2024
Verified
Book Chapter
Closed access
PDF file
AKAGUERATA KABORE
AGUERATA KABORE
Claudiane Ouellet-PlamondonClaudiane Ouellet-Plamondon
Claudiane Ouellet-Plamondon

18 September 2024
Verified
Book Chapter
Closed access
PDF file
AKAGUERATA KABORE
AGUERATA KABORE
MBMathieu Bendouma
Mathieu Bendouma
Claudiane Ouellet-PlamondonClaudiane Ouellet-Plamondon
Claudiane Ouellet-Plamondon