The article describes the synthesis of aminoorgano-functionalized silica as a prospective material for catalysis application. The amino groups have electron donor properties which are valuable for the metal chemical state of palladium. Therefore, the presence of electron donor groups is important for increasing catalysts’ stability. The research is devoted to the investigation of silica amino-modified support influence on the activity and stability of palladium species in 4-nitroaniline hydrogenation process. A series of catalysts with different supports such as SiO2, SiO2-C3H6-NH2 (amino-functionalized silica), γ-Al2O3 and activated carbon were studied. The catalytic activity was studied in the hydrogenation of 4-nitroaniline to 1,4-phenylenediamine. The catalysts were characterized by scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy and chemisorption of hydrogen by the pulse technique. The 5 wt.% Pd/SiO2-C3H6-NH2 catalyst exhibited the highest catalytic activity for 4-nitroaniline hydrogenation with 100% conversion and 99% selectivity with respect to 1,4-phenylenediamine.
Modern approaches to the production of new materials require the improvement of synthesis techniques towards simplifying the processes of their preparation and reducing the number of stages. Thus, in this study, one-stage synthesis of organomodified silica materials is developed using a special surfactant—dodecyldimethylamin N-oxide (DDAO). The peculiarity of this approach is that there is no need for heat treatment of the material, since DDAO is removed by washing in alcohol. Amino-, mercapto-, methyl-, and phenyl-modified silicas were synthesized using this method. The SEM images showed the morphology of all the obtained materials is close, all particles are spherical, and the diameter of individual particles is about 500 nm. Palladium particles were precipitated on these supports, then the experiments were carried out to study the catalytic activity of these materials in a model reaction of nitroaniline reduction. The phenyl modified matrix-based materials showed very low activity. This is due to the fact that the support and the substrate contain aromatic fragments, thus, hydrophobic interactions arise between them, which complicates the diffusion of the products. The leader is a matrix with an amino fragment, which is associated with its electron-donor effect. The XPS method revealed the amount of fixed palladium, as well as the binding energy shifts, which are 0.68 eV for 5% Pd/SiO2–C6H5; 0.56 eV for 5% Pd/SiO2–C3H6–NH2; 0.26 eV for 5% Pd/SiO2–CH3; and 0.13 eV for 5% Pd/SiO2.
30 May 2019 in Reaction Kinetics, Mechanisms and Catalysis
Двухстадийным процессом, основанным на жидкофазной гетерогенно-каталитической гидрогенизации нитробензола, п-нитротолуола и п-нитроанилина в водном растворе 2-пропанола c получением соответствующих аминов и последующей окислительной полимеризации полученных аминов в водно-спиртовом растворе соляной кислоты в присутствии окисляющих агентов – персульфата аммония и бихромата калия были получены полианилин, политолуидин, полифенилендиамин. Структура полученных полимеров подтверждена с помощью метода ИК-спектроскопии. Исследование термических свойств полученных полимеров проводили методами термогравиметрического анализа и дифференциально-сканирующей калориметрии. Показано, что полиамины термостабильны в интервале температур 250-350 °С. Для изучения электроповодности полученных полиаминов был использован метод кондуктометрии. Показано, что при использовании бихромата калия полученный продукт обладал меньшей проводимостью по сравнению с полимером, полученным при использовании персульфата аммония. В дальнейшем, синтезированные полимеры были использованы для получения текстильных композиционных материалов на основе текстильных волокон. На первой стадии получения данных материалов хлопковое и льняное волокна были покрыты пленкой полиамида-6, как легирующей добавки, повышающей механическую прочность и фотоустойчивость. Для нанесения пленки были использованы растворы полиамида-6 в концентрированной муравьиной кислоте двух концентраций – 2,4 ммоль/л, 0,5 ммоль/л. На второй стадии на полиамидную пленку был нанесен слой обработанных полиаминов. Поверхность полученных композиционных материалов была исследована методом электронной микроскопии. Анализ волокон хлопка и льна, обработанных раствором полиамида-6 различной концентрацией показал, что при увеличении концентрации раствора полиамида возрастает упорядоченность волокон и целостность всего пучка.