A K M Ahasun Habib

A K M Ahasun Habib

Department of Mechanical and Aerospace Engineering, Texas Tech University, Lubbock, Texas, USA
orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 August 2025 in Proceedings of the Design Society
Verified
Journal Article
Open access
PDF file
A K M Ahasun HabibA K M Ahasun Habib
A K M Ahasun Habib
IKIbrahim Khalil
Ibrahim Khalil
FMFarnaz Maleky
Farnaz Maleky
RPRanadip Pal
Ranadip Pal
Paul F EganPaul F Egan
Paul F Egan
The ability to modify designs, personalize nutrition, and improve food sustainability makes 3D food printing (3DFP) an exciting emerging technology. Food materials’ complex chemistry and mechanics make it difficult to consistently print designs of different shapes. This research uses two methods to assess printed food fidelity: Manual and automated image analysis with custom-developed algorithm. Fidelity based on printed area was measured for three overhang designs (0°, 30°, and 60°) and three food ink mixtures. The manual method provided a baseline for analysis by comparing printed images with CAD images. Both methods showed consistent results with only ±3% differences in analyzing printed design areas. While the computational method offers advantages for efficiency and bias reduction, making it well-suited for fidelity assessment to assess designs.

2 November 2026 in Designs
Verified
Journal Article
Open access
PDF file
NKNava Khatri
Nava Khatri
A K M Ahasun HabibA K M Ahasun Habib
A K M Ahasun Habib
Paul F EganPaul F Egan
Paul F Egan
Additive manufacturing is increasingly used for functional design, where optimizing print parameters is essential for achieving desired mechanical performance while minimizing time and material usage. However, the large number of printing parameters with varied effects on mechanical properties makes design challenging. This study investigates the influence of infill density and infill pattern by creating an integrated experimental and computational approach with systematic design characterization. CAD models were generated from G-code using reverse modeling to represent the internal structure of printed parts, and tensile tests were simulated to evaluate stiffness with physical validation. This reverse CAD generation is automated to extract flow velocity from G-code and calculate the extruded filament shape, with no manual input. Parts with a line infill pattern oriented parallel to the loading direction exhibited the highest elastic modulus of 2346 MPa at 100% infill density, as well as the highest stiffness per unit printing time (59.6 MPa/s) and per unit mass. The lowest modulus (359 MPa) was observed in line-patterned parts with a 0° raster orientation at 50% infill density. The results demonstrate that the experimentally validated computational workflow can generate and evaluate large datasets of mechanically evaluated parts across print parameters, thereby supporting efficient design when many parameters require consideration.

17 August 2026 in Designs
Verified
Journal Article
Open access
PDF file
A K M Ahasun HabibA K M Ahasun Habib
A K M Ahasun Habib
GBGabriel Briguiet
Gabriel Briguiet
Paul F EganPaul F Egan
Paul F Egan
3D printed lattices have efficient mechanics for wide-ranging engineering applications, especially biomedical domains. In bone tissue engineering, lattices constructed from unit cells enable tunable mechanics and tissue growth by altering unit cell beam diameters and porosity suitable for design personalization. Heterogeneously mixing unit cells throughout lattices is a promising tuning strategy; however, there remains a need for further systematic investigation linking design decisions to mechanical outcomes. In this study, biocompatible photopolymer resin is used to print Cube, BC (Body-Centered), and BC–Cube lattices with approximately 75% porosity. When tested in compression, these lattices have Elastic Moduli of 202 ± 5.4, 30 ± 1.6 MPa, and 97 ± 4.0 MPa, and yield stresses of 6.0 ± 0.11, 1.1 ± 0.07, and 3.1 ± 0.13 MPa, respectively. Heterogeneous lattices with Cube and BC unit cells in stochastic mixtures (25/75, 50/50, 75/25) and four deterministic layouts (Layers 0°, Layers 90°, Rows 0°, Rows 90°) with equally proportioned unit cells were also designed. Stochastic mixing produced a linear relationship between the Elastic Modulus and Cube unit cell proportion (R2 = 0.98), consistent with a rule-of-mixtures. Deterministic heterogeneous layouts bypassed the rule-of-mixtures, with Elastic Moduli spanning 97.6 to 163.4 MPa, with select designs outperforming stochastic configurations. Findings demonstrate the merits of heterogeneous strategies to improve lattice designs, with suitability for biomedical applications.