This research introduces a new technique to control constrained nonlinear systems, named Lyapunov-based neural network model predictive control using a metaheuristic optimization approach. This controller utilizes a feedforward neural network model as a prediction model and employs the driving training based optimization algorithm to resolve the related constrained optimization problem. The proposed controller relies on the simplicity and accuracy of the feedforward neural network model and the convergence speed of the driving training based optimization algorithm. The closed-loop stability of the developed controller is ensured by including the Lyapunov function as a constraint in the cost function. The efficiency of the suggested controller is illustrated by controlling the angular speed of three-phase squirrel cage induction motor. The reached results are contrasted to those of other methods, specifically the fuzzy logic controller optimized by teaching learning-based optimization algorithm, the optimized PID with particle swarm optimization algorithm, the neural network model predictive controller based on particle swarm optimization algorithm, and the neural network model predictive controller using driving training based optimization algorithm. This comparative study showcase that the suggested controller provides good accuracy, quickness and robustness due to the obtained values of the mean absolute error, mean square error root mean square error, enhancement percentage, and computing time in the different simulation cases, and it can be efficiently utilized to control constrained nonlinear systems with fast dynamics.
Rigid robots are used in a wide range of applications, however, the tasks that they can manage are limited. The use of continuum robots on the other hand can be extended to a broader scope of areas due to their flexibility and high degrees of freedom. Basically, their modeling and control are still ongoing at a slow pace. To this end, in this paper, a simplified dynamic model of a continuum robot with variable curvature is developed using the Euler-Lagrange method and Taylor expansion taking into account a previously-existing formula that links each of the continuum robot’s bending angles to each other. After that, a robust optimized proportional integral derivative controller is proposed for the sake of controlling continuum robots during trajectory tracking. To achieve simplicity and efficiency, multi discrete proportional integral derivative controllers are purposefully used. Then, an adaptive particle swarm optimization is chosen to find the best values for the control parameters. Finally, the efficiency of the proposed controller is evaluated by tracking some trajectories by both VC and CC continuum robots, where the obtained results show that the proposed control algorithm provides good performance in terms of settling time, overshoot, and robustness against disturbances.
This research intends to introduce a novel fuzzy computed torque control (FCTC) for the robot manipulator PUMA 560. This controller is obtained by improving the computed torque controller (CTC) through the addition of a nonlinear element, that is, the fuzzy controller, which compensates for the limitation of the CTC control action. The Archimedes optimization algorithm is utilized to optimize the FCTC parameters. The performances of the proposed controller are compared to the optimized CTC and PID controllers for different trajectories of the end effector. The obtained results demonstrate that the proposed controller can control complex nonlinear systems such as robots and demonstrates superior tracking performances over the optimized CTC and PID controllers.
In this paper, a new methodology for fault detection and diagnosis in photovoltaic systems is proposed. This method employs a novel Euclidean distance-based tree algorithm to classify various considered faults. Unlike the decision tree, which requires the use of the Gini index to split the data, this algorithm mainly relies on computing distances between an arbitrary point in the space and the entire dataset. Then, the minimum and the maximum distances of each class are extracted and ordered in ascending order. The proposed methodology requires four attributes: Solar irradiance, temperature, and the coordinates of the maximum power point (Impp, Vmpp). The developed procedure for fault detection and diagnosis is implemented and applied to classify a dataset comprising seven distinct classes: normal operation, string disconnection, short circuit of three modules, short circuit of ten modules, and three cases of string disconnection, with 25%, 50%, and 75% of partial shading. The obtained results demonstrate the high efficiency and effectiveness of the proposed methodology, with a classification accuracy reaching 97.33%. A comparison study between the developed fault detection and diagnosis methodology and Support Vector Machine, Decision Tree, Random Forest, and K-Nearest Neighbors algorithms is conducted. The proposed procedure shows high performance against the other algorithms in terms of accuracy, precision, recall, and F1-score.