Abigailt Flores-Ledesma

Dr. Abigailt Flores-Ledesma

Benemérita Universidad Autónoma de Puebla, Puebla City, Mexico
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 May 2022 in Gels
Verified
Journal Article
Open access
PDF file
Louis Saba HardanLouis Saba Hardan
Louis Saba Hardan
Mancino DavideMancino Davide
Mancino Davide
Rim BourgiRim Bourgi
Rim Bourgi
AAAlejandra Alvarado-Orozco
Alejandra Alvarado-Orozco
LRLaura Emma Rodríguez-Vilchis
Laura Emma Rodríguez-Vilchis
Naji KharoufNaji Kharouf
Naji Kharouf
Since the adhesion of resin composites to calcium silicate-based cement is considered challenging. Therefore, the best adhesion strategy should be indicated. This review aimed to assess the effect of different adhesive systems on the bond strength of resin composite to calcium silicate-based cement through a systematic review and meta-analysis. The subsequent PICOS framework used was: population, calcium silicate-based cement; intervention, use of self-etch adhesive systems; control, use of total-etch adhesive systems; outcome, bond strength; study design, in vitro studies. The literature search was conducted independently by two reviewers up to 18 February 2021. Electronic databases (PubMed, ISI Web of Science, SciELO, Scopus, and Embase) were searched for applicable articles. In vitro manuscripts studying the effect of adhesive systems on the bond strength of calcium silicate-based cement were considered. The meta-analyses were performed using Review Manager Software version 5.3.5 (The Nordic Cochrane Centre, The Cochrane Collaboration, Copenhagen, Denmark). Bond strength comparisons were made considering the type of calcium silicate-based cement (Mineral Trioxide Aggregate (MTA), Biodentine™, or TheraCal LC®). A p-value < 0.05 was considered statistically significant. A total of 7321 studies were retrieved in databases searched. After full-text evaluation, 37 eligible papers were assessed for qualitative analysis, leaving a total of 22 papers for the quantitative analysis. According to the meta-analysis, the bond strength values of resin composite materials to MTA and TheraCal LC® cement were favored when a total-etch adhesive system was used (p ≤ 0.02). On the other hand, the meta-analysis of the bond strength of resin-based materials to Biodentine™ calcium silicate-based cement was similar between both approaches (p = 0.12). The in vitro evidence suggests that the bond strength of resin-based materials to both MTA and TheraCal LC® cement was preferred by using the total-etch adhesive strategy. However, when bonding to Biodentine™, the use of self-etch or total-etch strategies displayed promising results. Given the lack of evidence related to the chemical interaction of self-etch adhesive materials with the bioceramics, if self-etch adhesives are used for bonding resin-based restorations to calcium silicate-based cement, a pretreatment with phosphoric acid could be recommended.

1 February 2017 in Materials Science and Engineering: C
Verified
Journal Article
Closed access
AFAbigailt Flores-Ledesma
Abigailt Flores-Ledesma
FSF. Barceló Santana
F. Barceló Santana
LBL. Bucio
L. Bucio
JAJ.A. Arenas-Alatorre
J.A. Arenas-Alatorre
MFM. Faraji
M. Faraji
AWA.M. Wintergerst
A.M. Wintergerst

23 May 2025 in Prosthesis
Verified
Journal Article
Open access
PDF file
Rim BourgiRim Bourgi
Rim Bourgi
Olivier EtienneOlivier Etienne
Olivier Etienne
Ahmed A HolielAhmed A Holiel
Ahmed A Holiel
Carlos Cuevas-SuárezCarlos Cuevas-Suárez
Carlos Cuevas-Suárez
Louis Saba HardanLouis Saba Hardan
Louis Saba Hardan
Naji KharoufNaji Kharouf
Naji Kharouf
Objectives: The widespread adoption of three-dimensional (3D)-printed resins in restorative dentistry has introduced significant challenges in establishing strong and lasting bonds with resin-based cements. Despite the development of numerous surface treatment techniques designed to improve adhesion, a clear consensus on the most effective approach remains elusive. This systematic review and meta-analysis critically examined the impact of various surface treatment protocols on the bond strength of 3D-printed resins. By comparing treated versus untreated surfaces, the study aimed to determine the most reliable strategies for enhancing adhesion, ultimately offering evidence-based guidance to inform clinical decision-making. Methods: This review identified relevant studies through a comprehensive search of MEDLINE via PubMed, Web of Science, Scielo, Scopus, and EMBASE databases, supplemented by manual reference checks, to identify in vitro studies published up to February 2025. Studies assessing the bonding of 3D-printed resins following various surface treatments and bonding protocols were included. Data on bond strength outcomes, such as shear bond strength, microtensile bond strength, and microshear bond strength, were extracted. Data extraction included study details, type of 3D-printed resin and printing technology, surface treatment protocols, bond strength testing methods, storage conditions, and results. The quality of included studies was assessed using the ROBDEMat tool. Meta-analyses were performed using the Review Manager Software (version 5.4, The Cochrane Collaboration, Copenhagen, Denmark), with statistical significance set at p < 0.05. Statistical heterogeneity among studies was evaluated using the Cochran Q test and the I2 inconsistency test. Results: Nine studies met the criteria for qualitative analysis, with eight included in the meta-analysis. The findings revealed that surface treatment protocols significantly enhanced the immediate bond strength to 3D-printed resins (p = 0.01), with only sandblasting and silane demonstrating a statistically significant effect (p < 0.007). Similarly, after aging, surface treatments continued to improve bond strength (p = 0.01), with sandblasting and hydrofluoric acid being the only methods to produce a significant increase in bond strength values (p < 0.001). Conclusions: This meta-analysis underscores the importance of combining mechanical and chemical surface treatments, especially sandblasting and silane application, to achieve reliable and durable bonding to 3D-printed resins.

22 April 2024 in Dentistry Journal
Verified
Journal Article
Open access
PDF file
Louis Saba HardanLouis Saba Hardan
Louis Saba Hardan
Rim BourgiRim Bourgi
Rim Bourgi
AFAbigailt Flores-Ledesma
Abigailt Flores-Ledesma
WDWalter Devoto
Walter Devoto
EDEmma Devoto
Emma Devoto
Carlos Cuevas-SuárezCarlos Cuevas-Suárez
Carlos Cuevas-Suárez
The aim of this investigation was to conduct a systematic review and meta-analysis to determine the necessity of a white diet during or following a bleaching procedure. This systematic review and meta-analysis followed the PRISMA guidelines meticulously. The research question was: Is a white diet necessary during and/or after a bleaching treatment? In vitro studies or clinical trials reporting the color change in bleached enamel after the use of a free-staining diet were considered for full-text review. For the analyses, a random-effects model was employed. Statistical significance was defined as a p-value < 0.05. A total of 17 documents were eligible for qualitative analysis: 5 clinical trials and 12 in vitro studies. Only data from the clinical trials were included in the meta-analysis. For at-home bleaching, differences in the color among the subjects were not statistically significant during the first (p = 0.64), second (p = 0.26) or third (p = 0.43) weeks of treatment. Also, the color difference one month after finishing the bleaching treatment were not statistically significant (p = 0.27). The color difference one month after finishing an in-office treatment showed that the restrictions on diet did not significantly improve the bleaching outcomes (p = 0.90). According to the findings of this review, dietary restrictions are not necessary during or after bleaching procedures.

1 January 2024 in Journal of Oral Science
Verified
Journal Article
Open access
PDF file
MRMadelin Ruiz-Peñarrieta
Madelin Ruiz-Peñarrieta
MMMaría de los Angeles Moyaho-Bernal
María de los Angeles Moyaho-Bernal
JSJosé A. Salazar-Vergara
José A. Salazar-Vergara
JOJuana P. Ramírez Ortega
Juana P. Ramírez Ortega
LRLAURA ELVIRA SERRANO DE LA ROSA
LAURA ELVIRA SERRANO DE LA ROSA
AFAbigailt Flores-Ledesma
Abigailt Flores-Ledesma
Purpose: To evaluate the influence of the polymerization distance of monowave and polywave light curing units (LCUs) on the measured irradiance relative to the value reported by the manufacturer in relation to the physical properties of resin-based composites (RBCs).Methods: Four LCUs were used: one monowave and three polywave. The irradiance was measured with a digital radiometer. Depth of cure (DC) and flexural strength (FS) tests were performed according to ISO 4049:2019 at polymerization distances of 0 mm and 5 mm.Results: The irradiance of all LCUs was higher than that reported by the manufacturer (>25-64%). The irradiance of the four LCUs was reduced when polymerization was performed at between 0 to 5 mm (paired t-test, P < 0.001). The DC at 0 mm was similar in all groups but was significantly decreased at 5 mm distance (ANOVA P < 0.001). FS showed differences among the LCUs at 0 mm (ANOVA P < 0.001) and was affected by the polymerization distance. The elastic modulus was unaffected by the LCU used or the distance (ANOVA P > 0.001).Conclusions: The LCU must be positioned as near as possible to RBCs during the polymerization process, as increased distance negatively affects the depth of cure and flexural strength.

1 January 2023 in Journal of Oral Science
Verified
Journal Article
Open access
PDF file
AFAbigailt Flores-Ledesma
Abigailt Flores-Ledesma
ATAdriana Tejeda-Cruz
Adriana Tejeda-Cruz
MMMaría A. Moyaho-Bernal
María A. Moyaho-Bernal
AWAna Wintergerst
Ana Wintergerst
YMYoshamin A. Moreno-Vargas
Yoshamin A. Moreno-Vargas
JAJesús A. Arenas-Alatorre
Jesús A. Arenas-Alatorre
Purpose: To evaluate the effect of adding wollastonite and bioactive glass to an experimental mineral trioxide aggregate-like cement (MTA) on the dimensional stability, compressive strength, solubility, bioactivity, and marginal adaptation by scanning electron microscopy (SEM) and X-ray diffraction (XRD).Methods: Four groups were evaluated at 7, 14, and 21 days: MTA Angelus, experimental MTA-like cement (MTA Exp), BG10 (MTA Exp+10 wt% bioactive glass), and WO20 (MTA Exp+20 wt% wollastonite). To evaluate marginal adaptation, extracted teeth were endodontically obturated and root-end cavities were prepared and filled with the tested materials.Results: Cements with bioactive materials showed minimal dimensional changes. Adding wollastonite or bioactive glass to MTA Exp reduces the compressive strength but does not affect solubility. Bismite (Bi2O3), larnite (Ca2SiO4), calcite (CaCO3) and carbonated hydroxyapatite (Ca5[PO4,CO3]3[OH]) were identified in the four cements; ettringite (Ca6Al2[SO4]3[OH]12·26H2O) and bismutite ([BiO]2CO3) were only observed in MTA Exp, BG10, and WO20. Cement-dentin interfaces were not observed after 14 days on the BG10 and WO20 cement composites due to the ettringite formation.Conclusion: Acicular growing crystals typical of hydroxyapatite were found on the surfaces of all cements. An improved marginal adaptation was observed with the addition of wollastonite or bioactive glass.