Afshana Morshed

Ms. Afshana Morshed

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 September 2021 in Lubricants
Verified
Journal Article
Open access
PDF file
Afshana MorshedAfshana Morshed
Afshana Morshed
Hui WuHui Wu
Hui Wu
Zhengyi JiangZhengyi Jiang
Zhengyi Jiang
Applying nanomaterials and nanotechnology in lubrication has become increasingly popular and important to further reduce the friction and wear in engineering applications. To achieve green manufacturing and its sustainable development, water-based nanolubricants are emerging as promising alternatives to the traditional oil-containing lubricants that inevitably pose environmental issues when burnt and discharged. This review presents an overview of recent advances in water-based nanolubricants, starting from the preparation of the lubricants using different types of nanoadditives, followed by the techniques to evaluate and enhance their dispersion stability, and the commonly used tribo-testing methods. The lubrication mechanisms and models are discussed with special attention given to the roles of the nanoadditives. Finally, the applications of water-based nanolubricants in metal rolling are summarised, and the outlook for future research directions is proposed.

6 April 2024 in Lubricants
Verified
Journal Article
Open access
PDF file
Afshana MorshedAfshana Morshed
Afshana Morshed
Hui WuHui Wu
Hui Wu
MRMengyuan Ren
Mengyuan Ren
ZXZhao Xing
Zhao Xing
SJSihai Jiao
Sihai Jiao
Zhengyi JiangZhengyi Jiang
Zhengyi Jiang
An Rtec ball-on-disk tribometer was used to investigate the tribological performance of the synthesised water-based nanolubricants containing hBN/TiO2 nanocomposite at room temperature. The water-based nanolubricants with different concentrations were prepared by adding glycerol and sodium dodecyl benzene sulfonate (SDBS) under ultrasonication. These as-prepared nanolubricants demonstrated exceptional dispersion stability for 7 days without distinct sedimentation. The results indicate that the water-based nanolubricants with an overall concentration of 1.0 wt% at different ratios (hBN: TiO2 = (1:0), (0.7:0.3), (0.5:0.5), (0.3:0.7), (0:1)) can effectively reduce the coefficient of friction (COF) and the wear of the ball and disk. In particular, the water-based nanolubricant containing 0.5 wt% hBN and 0.5 wt% TiO2 exhibited the best tribological performance, leading to a significant reduction in COF up to 70%, and decreased the wear area of the ball and disk by up to 79.57% and 60.40%, respectively, compared to those obtained using distilled water. The lubrication mechanisms were mainly attributed to the formation of a protective film, and the mending, polishing, rolling, and synergistic effects of the hBN nanosheets and TiO2 nanoparticles.

6 February 2025 in Nanoscale Advances
Verified
Journal Article
Open access
PDF file
Afshana MorshedAfshana Morshed
Afshana Morshed
FLFei Lin
Fei Lin
HWHui Wu
Hui Wu
ZXZhao Xing
Zhao Xing
SJSihai Jiao
Sihai Jiao
Zhengyi JiangZhengyi Jiang
Zhengyi Jiang
Stick–slip phenomenon can be significantly reduced with the application of hBN/TiO2 water-based lubricants during sliding process, where hBN/TiO2 participates in trapping wear debris and forming well-distributed tribofilms between the contact zones.

30 December 2021 in Journal of Thermal Engineering
Verified
Journal Article
Closed access
PDF file
FHFarzad Hossain
Farzad Hossain
AMAshrafuzzaman Miah
Ashrafuzzaman Miah
Afshana MorshedAfshana Morshed
Afshana Morshed
IRInsiat Islam Rabby
Insiat Islam Rabby
Eric HuEric Hu
Eric Hu
The paper analyzes laminar forced convection heat transfer for both single and mixture phase models utilizing Al2O3-water and CuO-water nanofluids as the working fluid and examines the effect of internal fins in the collector tubes in order to improve collector efficiency. A physical model with governing equations has been defined. Finite volume method has been utilized for discretizing governing equations and finite element method has been utilized for three-dimensional analysis of solar plate model with finned tubes. Convective heat transfer coefficient, Nusselt number and shear stress have been analyzed for Reynolds numbers from 200 to 700 with 0-5% volume fractions of nanofluid. Moreover, the efficiency of the collector has been investigated for constant flow rates from 0.02 to 0.04 mL/s and variable overall heat loss coefficient for the same range of volume fractions of nanofluid. It has been found that increment of shear stress and heat transfer coefficient occurred with the increment of concentration of nanoparticles and the Reynolds number. Investigation of particle size has not shown any notable variation with the mixture phase model. Mixture-phase model gives comparatively lower values due to the reduction of viscosity near the wall. Noticeable increment of efficiency has been observed by changing working fluid from Al2O3-water to CuO-water which has been further improved by utilizing variable overall heat loss coefficient. Efficiency increases up to 6.5% and 8.7% than the base fluid for utilizing Al2O3-water and CuO-water nanofluid respectively. Additionally, utilizing internal fins to the riser tubes, the efficiency increases up to 11%.

26 August 2025 in Nano Express
Verified
Journal Article
Open access
Afshana MorshedAfshana Morshed
Afshana Morshed
FLFei Lin
Fei Lin
Hui WuHui Wu
Hui Wu
ZXZhao Xing
Zhao Xing
SJSihai Jiao
Sihai Jiao
Zhengyi JiangZhengyi Jiang
Zhengyi Jiang
Environmentally friendly synthesis techniques have gained increasing attention as viable methodologies for preparing nanocomposite. In particular, ball milling has emerged as a green and cost-effective method that ensures the control of size, shape and morphology to generate nanocomposites without compromising sample quality or purity. In this work, a wet milling technique was employed to synthesise hBN/TiO2 nanocomposites, which were characterised via XRD, XPS, and TEM. The results demonstrated that milling for 6 h with a 1:5 powder-to-ball ratio effectively deagglomerated and evenly distributed TiO2 nanoparticles within the hBN nanosheets by promoting the formation of B-O interactions between the boron of hBN and oxygen of TiO2. Water-based lubricants prepared using the as-synthesised hBN/TiO2 nanocomposites showed stable dispersion for up to 5 days, regardless of the milling conditions. Tribological tests via a ball-on-disk tribometer revealed that water-based lubricants with optimally milled nanocomposite exhibited outstanding tribological performance by reducing the average COF and wear by 78.4 and 91.3%, respectively, compared with dry conditions. However, extending the milling duration negatively affected the overall performance of the nanocomposites. The lubrication mechanism is attributed to the synergistic effect of both hBNNSs and TiO2 NPs; layered hBN contributed to protective film formation, whereas TiO2 NPs assisted in rolling and mending effects during the sliding process.

1 August 2025 in Lubricants
Verified
Journal Article
Open access
PDF file
Afshana MorshedAfshana Morshed
Afshana Morshed
Fei LinFei Lin
Fei Lin
Hui WuHui Wu
Hui Wu
ZXZhao Xing
Zhao Xing
SJSihai Jiao
Sihai Jiao
Zhengyi JiangZhengyi Jiang
Zhengyi Jiang
Ecotribology focuses on both saving energy resources and reducing environmental pollution. Considering environmental concerns, water-based nanolubricants have gained significant attention over conventional oil-based ones. Non-ecotoxic and highly environmentally friendly nanoadditives were chosen for nanolubricant synthesis, especially considering their use at elevated temperatures. In this study, hexagonal boron nitride nanosheets (hBNNSs) and titanium dioxide nanoparticles (TiO2 NPs) were used to prepare water-based lubricants with glycerol and surfactant sodium dodecyl benzene sulfonate (SDBS) in water under ultrasonication. An Rtec ball-on-disk tribometer was used to investigate the tribological performance of the synthesised water-based lubricants containing different nano-hBN/TiO2 concentrations, with dry and water conditions used as benchmarks. The results indicated that the water-based nanolubricant containing 0.5 wt% hBN and 0.5 wt% TiO2 exhibited the best tribological performance at both ambient (25 °C) and elevated (500 °C) temperatures. This optimal concentration leads to a reduction in the coefficient of friction (COF) by 72.9% and 37.5%, wear of disk by 62.5% and 49%, and wear of ball by 74% and 69% at ambient and elevated temperatures, respectively, compared to that of distilled water. Lubrication mechanisms were attributed to the rolling, mending, tribofilm, solid layer formation, and synergistic effects of hBNNSs and TiO2 NPs.