The Kingdom of Saudi Arabia’s (KSA) microgrids must make significant progress during the next five years, since the Saudi government published the Saudi Vision 2030 and the National Transformation Program 2020. In order to implement renewable energy and microgrid technologies in the Saudi Electric Power System(EPS), King Abdullah City for Atomic and Renewable Energy (K.A.CARE) started developing an energy mix program in 2016. To achieve the intended goals, this program will unquestionably need to adhere to practical and technical criteria. In the past five years, the Saudi government has made significant investments in renewable energy technology. In order to keep up with the growth of microgrid systems globally, the Saudi Water and Electricity Regulatory Authority (WERA) is now working to update and define a standard for microgrids. The IEEE 2030 standard, which includes guidelines for understanding smart grid interoperability the integration of communication architectures and power systems, and information technology architectures, is proposed to replace the IEEE 1547.4 standard currently in use by the WERA. In the past two decades, smart grid technology has advanced dramatically and attracted great technical attention. To guarantee that K.A.CARE and other research and technical institutes can effectively complete their deliverables, a standard for microgrids has to be established. Additionally, this paper offers some recommendations on how to use these standards to implement them in the Saudi EPS, as well as a feasibility analysis for adopting the IEEE 1547.4 standard in the KSA.
Reactive power sharing among distributed generators (DGs) in islanded microgrids (MGs) presents control challenges, particularly in the mismatched feeder line condition. Improved droop control methods independently struggle to resolve this issue and centralized secondary control methods exhibit a high risk of collapse for the entire MG system under any failure in the central control. Distributed secondary control methods have been recently proposed to mitigate the reactive power error evident in the presence of mismatched feeder lines. This paper details a mathematical model of an adaptive virtual impedance control that is based on both leaderless and leader-followers consensus controls with a novel triangle mesh communication topology to ensure accurate active and reactive power sharing. The approach balances an enhanced rate of convergence with the anticipated implementation cost. A MATLAB/Simulink model with six DG units validates the proposed control performance under three different communication structures: namely, ring, complete, and triangle mesh topologies. The results suggest that leaderless consensus control is a reliable option with large DG systems, while the leader-followers consensus control is suitable for the small systems. The triangle mesh communication topology provides a compromise approach balancing the rate of convergence and the expected cost. The extensibility and scalability are advantages of this topology over the alternate ring and complete topologies.
This study introduces an innovative neurofuzzy fractional-order sliding mode control approach for standalone photovoltaic systems, designed to mitigate uncertainties and disturbances caused by fluctuating environmental conditions. The method combines a fuzzy logic neural network, uniform robust exact differentiator, and fractional-order sliding mode control. The neural network accurately predicts nonlinear reference voltage trajectories, whereas the differentiator estimates unmeasurable states and external disturbances. The inclusion of fractional-order control improved the adaptability and robustness of the system. The stability of the proposed approach is rigorously validated using the Lyapunov theory. MATLAB simulations and experimental results significantly improve tracking accuracy and overall system performance, providing a robust and efficient solution to optimize energy extraction in standalone PV systems.
15 March 2023 in International Journal of Energy Research
Previous theoretical research efforts which were validated by experimental findings demonstrated the thermo-economic benefits of the hybrid concentrated photovoltaic-thermoelectric (CPV-TE) system over the stand-alone CPV. However, the operating conditions and TE material properties for maximum CPV-TE performance may differ from those required in a standalone thermoelectric module (TEM). For instance, a high-performing TEM requires TE materials with high Seebeck coefficients and electrical conductivities, and at the same time, low thermal conductivities (). Although it is difficult to attain these ideal conditions without complex material engineering, the low implies a high thermal resistance and temperature difference across the TEM which raises the PV backplate’s temperature in a hybrid CPV-TE operation. The increased PV temperature may reduce the overall system’s thermodynamic performance. To understand this phenomenon, a study is needed to guide researchers in choosing the best TE material for an optimal operation of a CPV-TE system. However, no prior research effort has been made to this effect. One method of finding the optimum TE material property is to parametrically vary one or more transport parameters until an optimum point is determined. However, this method is time-consuming and inefficient since a global optimum may not be found, especially when large incremental step sizes are used. This study provides a better way to solve this problem by using a multiobjective optimization genetic algorithm (MOGA) which is fast and reliable and ensures that the global optimum is obtained. After the optimization has been conducted, the best performing conditions for maximum CPV-TE energy, exergy, and environmental (3E) performance are selected using the technique for order performance by similarity to ideal solution (TOPSIS) decision algorithm. Finally, the optimization workflow is deployed for 7000 test cases generated from 10 features using the optimal machine learning (ML) algorithm. The result of the optimization chosen by the TOPSIS decision-making method generated an output power, exergy efficiency, and CO2 saving of 44.6 W, 18.3%, and 0.17 g/day, respectively. Furthermore, among other ML algorithms, the Gaussian process regression was the most accurate in learning the CPV-TE performance dataset, although it required more computational effort than some algorithms like the linear regression model.
Power sharing in AC microgrids is a critical need to overcome the challenge of an increase of the power demand. AC microgrids need to meet active and reactive power and load requirements to maintain and stabilize the microgrid voltage and frequency. This paper provides a literature review of primary control methods to regulate voltage, and frequency, achieve proper power sharing, and stabilize the parallel inverters in microgrids with linear loads. Our focus is on methods that do not require communication. This paper discusses the advantages and drawbacks of these primary control methods and current and future challenges that need to be investigated and overcome.