Ahmed Mohamed Mostafa Hegba

Dr. Ahmed Mohamed Mostafa Hegba

orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 October 2025 in Egyptian Journal of Chemistry
Verified
Journal Article
Closed access
AHAhmed Mohamed Mostafa Hegba
Ahmed Mohamed Mostafa Hegba
ATAli Abd El Tawwab
Ali Abd El Tawwab
MMM. A. H. Mourad
M. A. H. Mourad
MMMohamed Moheyeldein
Mohamed Moheyeldein
This article investigates the effects of incorporating carbon nanotubes (CNTs) on the tribo-mechanical properties and structural characteristics of asbestos-free composite brake friction materials. The study compares a commercial brake pad (CBP) with three newly fabricated samples containing varying CNT concentrations 0.5 – 1.5 wt.%. The CNTs used were synthesized via an electric arc-discharge in liquid technique, yielding diameters of 7 nm and lengths of 90 nm. Characterization was performed using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD). The results indicate that the inclusion of CNTs significantly improves the material's properties by enhancing microstructural homogeneity and reducing porosity, especially in the sample with 1.0% CNT. While the CBP has a heterogeneous microstructure with uneven particle distribution, the CNT-reinforced composites show a more uniform dispersion of elements, which is attributed to the CNTs bridging different phases. The mechanical and physical tests further demonstrate this improvement. The addition of CNTs resulted in a significant increase in hardness, from 48 HV in CBP to 75–76 HV in the CNT samples. Additionally, CNTs reduced oil and water absorption, as well as heat swell, compared to the CBP. The CNT2 sample, with a 1.0% CNT concentration, showed the highest compressive strength, exceeding 250 MPa, while the CBP's strength was around 160 MPa. Overall, the findings suggest that the use of CNTs as a reinforcing filler provides a promising approach for developing high-performance, sustainable, and eco-friendly brake pad materials with superior mechanical and tribological properties.

10 August 2026 in Journal of Composites Science
Verified
Journal Article
Open access
PDF file
AHAhmed Mohamed Mostafa Hegba
Ahmed Mohamed Mostafa Hegba
AAAli M. Abd-El-Tawwab
Ali M. Abd-El-Tawwab
MMMohamed Mourad
Mohamed Mourad
AKAmal Khalifa
Amal Khalifa
MMMohamed Mohey
Mohamed Mohey
The development of sustainable, high-performance friction composites is critical for the automotive industry, given the environmental and health concerns associated with conventional brake pad materials such as asbestos and copper. This study investigates the effect of incorporating micro- and nano-sized Al2O3, SiC, and carbon nanotubes (CNTs) into a novel, eco-friendly, asbestos-free, and copper-free brake pad formulation. Six composite samples were fabricated via a cold-pressing and hot-molding process: five formulations containing a single, size-controlled micro-/nano-sized reinforcement (Al2O3, SiC, and CNTs), and one reference formulation (CBP# Reference) containing an unrefined, commercial-grade combination of Al2O3 and SiC in place of the size-controlled additive. All formulations were rigorously characterized for their physical, mechanical, and tribological properties. The nano-Al2O3 formulation exhibited the highest density (2.197 g/cm3) and compressive strength (249.7 MPa), while the micro-SiC formulation achieved superior wear resistance, recording the lowest weight loss (0.0053 g) and the highest hardness (90 HV). The nano-SiC formulation offered the most balanced overall performance, combining high hardness (86.2 HV) with the highest average friction force (33.65 N) and the most stable friction-time response among all samples. The CNT-reinforced formulation produced the highest maximum friction force (42.07 N) but showed only moderate improvement in density, hardness, and compressive strength relative to the ceramic-reinforced samples. Compared with the CBP# reference, all five developed formulations exhibited higher hardness and coefficient of friction alongside lower weight loss, confirming their potential as durable, sustainable alternatives for automotive brake friction applications.