Artificial intelligence (AI) and machine learning (ML) techniques have huge potential to efficiently manage the automated operation of the internet of things (IoT) nodes deployed in smart cities. In smart cities, the major IoT applications are smart traffic monitoring, smart waste management, smart buildings and patient healthcare monitoring. The small size IoT nodes based on low power Bluetooth (IEEE 802.15.1) standard and wireless sensor networks (WSN) (IEEE 802.15.4) standard are generally used for transmission of data to a remote location using gateways. The WSN based IoT (WSN-IoT) design problems include network coverage and connectivity issues, energy consumption, bandwidth requirement, network lifetime maximization, communication protocols and state of the art infrastructure. In this paper, the authors propose machine learning methods as an optimization tool for regular WSN-IoT nodes deployed in smart city applications. As per the author’s knowledge, this is the first in-depth literature survey of all ML techniques in the field of low power consumption WSN-IoT for smart cities. The results of this unique survey article show that the supervised learning algorithms have been most widely used (61%) as compared to reinforcement learning (27%) and unsupervised learning (12%) for smart city applications.

Fault diagnosis and condition monitoring are important to increase the efficiency and reliability of photovoltaic modules. This paper reviews the challenges and limitations associated with fault diagnosis of solar modules. A thorough analysis of various faults responsible for failure of solar modules has been discussed. After reviewing relevant work, a monitoring tool is designed using thermography and artificial intelligent systems that allows the detection of various types of faults in PV modules and at the same time the designed tool aims to filter the nonsignificant anomalies. A neural network (NN) classifier is applied to the transfer characteristics (I‐V data) of the faulty PV module for the diagnosis which adapts multilayer perceptron (MLP) networks to identify the type and location of occurring faults. The Discrete wavelet transform (DWT) based signal processing technique is utilized in the feature extraction process to reduce the NN input size. The developed detection algorithm is adapted for 24/7 automated surveillance. For a given fault condition, the average fault detection time is observed to be <9 seconds, which is lower than the previous work done. The developed algorithm achieved 100% accuracy when tested on a predetermined fault data set.

The use of artificial intelligence (AI) is increasing in various sectors of photovoltaic (PV) systems, due to the increasing computational power, tools and data generation. The currently employed methods for various functions of the solar PV industry related to design, forecasting, control, and maintenance have been found to deliver relatively inaccurate results. Further, the use of AI to perform these tasks achieved a higher degree of accuracy and precision and is now a highly interesting topic. In this context, this paper aims to investigate how AI techniques impact the PV value chain. The investigation consists of mapping the currently available AI technologies, identifying possible future uses of AI, and also quantifying their advantages and disadvantages in regard to the conventional mechanisms.

The Wireless Sensor Networks (WSN) are the basic building blocks of today’s modern internet of Things (IoT) infrastructure in smart buildings, smart parking, and smart cities. The WSN nodes suffer from a major design constraint in that their battery energy is limited and can only work for a few days depending upon the duty cycle of operation. The main contribution of this research article is to propose an efficient solar energy harvesting solution to the limited battery energy problem of WSN nodes by utilizing ambient solar photovoltaic energy. Ideally, the Optimized Solar Energy Harvesting Wireless Sensor Network (SEH-WSN) nodes should operate for an infinite network lifetime (in years). In this paper, we propose a novel and efficient solar energy harvesting system with pulse width modulation (PWM) and maximum power point tracking (MPPT) for WSN nodes. The research focus is to increase the overall harvesting system efficiency, which further depends upon solar panel efficiency, PWM efficiency, and MPPT efficiency. Several models for solar energy harvester system have been designed and iterative simulations were performed in MATLAB/SIMULINK for solar powered DC-DC converters with PWM and MPPT to achieve optimum results. From the simulation results, it is shown that our designed solar energy harvesting system has 87% efficiency using PWM control and 96% efficiency $({\eta }_{sys})$ by using the MPPT control technique. Finally, an experiment for PWM controlled SEH-WSN is performed using Scientech 2311 WSN trainer kit and a Generic LM2575 DC-DC buck converter based solar energy harvesting module for validation of simulation results.

Photovoltaic (PV) energy has become one of the main sources of renewable energy and is currently the fastest-growing energy technology. As PV energy continues to grow in importance, the investigation of the faults and degradation of PV systems is crucial for better stability and performance of electrical systems. In this work, a fault classification algorithm is proposed to achieve accurate and early failure detection in PV systems. The analysis is carried out considering the feature extraction capabilities of the wavelet transform and classification attributes of radial basis function networks (RBFNs). In order to improve the performance of the proposed classifier, the dynamic fusion of kernels is performed. The performance of the proposed technique is tested on a 1 kW single-phase stand-alone PV system, which depicted a 100% training efficiency under 13 s and 97% testing efficiency under 0.2 s, which is better than the techniques in the literature. The obtained results indicate that the developed method can effectively detect faults with low misclassification.

This paper presents a dynamic voltage support (DVS) scheme for achieving low voltage ride-through (LVRT) with a grid connected photovoltaic (PV) inverter during the voltage sag fault. The DVS scheme is achieved by formulating an additional reactive active current control (ARACC) mode which is developed from a conventional reactive current control (RCC) approach. This provides stable operation of the system and achieves higher effectiveness due to the lower X/R ratio at the point of common coupling (PCC) in low voltage (LV) networks. Further, the performance of the proposed controller is assessed by simulating a 4 kW system for voltage sag faults. Further, the proposed controller tested with the real-time simulations and experimental setup for voltage sag conditions. The results presented demonstrate that the active and reactive power is regulated in concordance with grid code requirements. The controller achieves LVRT within the time limits of grid standard during symmetrical faults, which makes it appropriate for fast transient events. This operates the PV system under its nominal capacity, avoiding unwanted grid disconnection events.