In the present work, we represent two thiazolidinediones, namely (Z)-5-(4-methoxybenzylidene) thiazolidine-2,4-dione (MeOTZD) and (Z)-5-(4-methylbenzylidene) thiazolidine-2,4-dione (MeTZD), as corrosion inhibitors for carbon steel (CS) in 1.0 M HCl solution. Techniques for gravimetric methods, electrochemical measurements, and morphological characterization were used to conduct experimental evaluations. Additionally, calculations based on the fundamental principles of Density Functional Theory (DFT) were employed to simulate inhibitor–iron interactions. Experimental results indicated that investigated inhibitors can significantly enhance the corrosion resistance of CS, reaching a performance of 95% and 87% at 5 × 10−3 mol/L of MeOTZ and MeTZD, respectively. According to gravimetric and electrochemical experiments, inhibitor molecules obstruct corrosion reactions by adhering to the CS surface, which follows the Langmuir isotherm model. On the other hand, the morphological analysis showed a well-distinguished difference between unprotected and protected CS surfaces as a result of the inhibitors’ addition to HCl. Projected density of states and interaction energies obtained from first-principles DFT simulations indicate that the studied molecules form covalent bonds with iron atoms through charge transfer.
In the present work, we present the superior corrosion inhibition properties of three plant-based products, Fraxinus excelsior (FEAE), Zingiber zerumbet (ZZAE), and Isatis tinctoria (ITAE), that efficiently inhibit the corrosion of mild steel in phosphoric acid. The anti-corrosion and adsorption characteristics were assessed using a combination of experimental and computational approaches. Weight loss, potentiodynamic polarization, and electrochemical impedance spectroscopy methods were used to evaluate the inhibitive performance of the inhibitors on the metal surface. Then, both DFT/DFTB calculations and molecular dynamic simulations were further adopted to investigate the interaction between organic inhibitor molecules and the metal surface. The protective layers assembled using the active constituents, such as carbonyl and hydroxyl groups, of the three plant-based products offer high electrochemical stability at high temperatures and robust protection against aggressive acidic solutions. All electrochemical measurements showed that the inhibition performance of extracts increased by increasing their concentration and improved in the following order: FEAE > ZZAE > ITAE. Further, these extracts worked as mixed-type inhibitors to block the anodic and cathodic active sites on the mild steel surface. Multi-level computational approaches revealed that FEAE is the most adsorbed inhibitor owing to its ability to provide electron lone pairs for electrophilic reactions. The experimental and theoretical results showed good agreement. These results indicate the possibility of replacing conventional compounds with natural substituted organic products in the fabrication of hybrid materials with effective anti-corrosion performance.
The growing interest in eco-friendly alternatives has sparked research into essential oils as corrosion inhibitors, offering an innovative approach. Investigating their unique properties, researchers aim to advance corrosion engineering for a sustainable future. Despite promising lab results, the exact mechanism of their action in corrosion engineering is not fully understood, highlighting the need for further exploration. Using computational modeling, we explored how grape seed oil (GSO) compounds interact with carbon steel (C38) surfaces, unraveling the inhibitive properties against corrosion. Employing various simulation methods, such as density functional theory (DFT), density functional-based tight-binding (DFTB), and molecular dynamics (MD), this study validates experimental findings and unveils novel insights into the underlying mechanisms of these interactions. Quantitative analysis quantifies the inter- and intramolecular synergistic effect and suggests that the LA@OA promotes the charge-transfer process. DFTB calculations reveal that the synergistic action in the parallel adsorption configuration of LA and OA molecules is sufficiently strong to form a stable adsorption layer on the Fe surface with a large negative value of Eads (6.74 eV). Experimental results demonstrated that the inhibition performance of GSO extract exhibited a notable increase with increasing concentrations, reaching a higher efficiency of 79% at 0.5 g/L of GSO. EIS results demonstrated that the existence of the GSO inhibitor film increases the resistance of the charge transfer (about 80 Ω cm2 at 0.5 g/L), indicating the superior barrier anticorrosion properties of the formed film. The theoretical results validate the exceptional anticorrosion performance and provide compelling evidence of the remarkable ability to prevent corrosion of C38 substrate. The findings offer potential pathways for the development of eco-friendly alternatives and interestingly provide a foundation understanding in the field.
Growing research activity on layered double hydroxide (LDH)-based materials for novel applications has been increasing; however, promoting LDH layer growth and examining its morphologies without resorting to extreme pressure conditions remains a challenge. In the present study, we enhance LDH growth and morphology examination without extreme pressure conditions. By synthesizing Mg-Al LDH directly on plasma electrolytic oxidation (PEO)-treated Mg alloy surfaces and pores at ambient pressure, the direct synthesis was achieved feasibly without autoclave requirements, employing a suitable chelating agent. Additionally, enhancing corrosion resistance involved incorporating electron donor–acceptor compounds into a protective layer, with 8-Hydroxyquinoline-5-sulfonic acid (HQS) that helps in augmenting Mg alloy corrosion resistance through the combination of LDH ion-exchange ability and the organic layer. DFT simulations were used to explain the mutual interactions in the LDH system and provide a theoretical knowledge of the interfacial process at the molecular level.
15 April 2022 in Journal of Adhesion Science and Technology
The inhibitory potential of aqueous black mustard seed (BMS) extract on mild steel corrosion in H2SO4 solutions was tested using various chemicals (Hydrogen Evolution, HE, and Weight Loss, WL) and electrochemical (Electrochemical Impedance Spectroscopy, EIS, and Potentiodynamic Polarization, PDP) methods. The adsorption process was characterized using scanning electron microscopy (SEM), Fourier Transform Infrared Spectroscopy (FT-IR), and contact angle technique. Computational studies were also used to improve the visualization of the adsorption mechanism of the active components found in BMS on the metal surface. The results showed that aqueous BMS extract had a superior ability to inhibit mild steel corrosion in 2 M H2SO4 (IE% = 94.83 at 3.5 g/L). Polarization outcomes demonstrated that the BMS functioned as a mixed-type inhibitor. The findings are consistent with the Langmuir adsorption isotherm. FT-IR, contact angle, and SEM successfully showed the formation of a dense and ordered BMS-adsorbed film. The calculated Ea in the absence and presence of BMS revealed that physisorption and chemisorption played a role in the inhibition mechanism. Using DFT quantum-chemical calculations and MD simulations, a relationship can be established between the electronic structure of Sinigrin, the main component in BMS, and its ability to inhibit corrosion. BMS extract showed exceptional inhibitory activity in a wide range of H2SO4 concentrations. One of the important aspects of this study is the possibility of applying BMS as a greener alternative to design environmentally friendly materials in working on corrosion problems of metallic equipment in acidic environments.
The corrosion behavior of carbon steel X36 (CSX36) in solutions of soils collected from different areas linked to the main pipe network of a water distribution system in Jeddah City (Obhour Al Shamaliyah, Ob-Sh; Al Shateie, Sh; Al Safa, Sf; Al Samer, Sa; and Al Jameaah, Ja) at an ambient temperature (23 ± 1 °C) was studied. The corrosion behavior was monitored using various techniques, such as weight loss and electrochemical (open circuit potential [OCP]; electrochemical impedance spectroscopy; and potentiodynamic polarization) measurements. Visual and microscopic examinations of the surface morphology of the studied metals were evaluated and discussed. The corrosion rates in all the studied soil solutions decreased with an increase in the immersion period over 80 weeks. The corrosivity of the studied soils based on weight loss measurements followed the order Sh > Ja > Ob-Sh > Sa > Sf. The value of the OCP gradually shifted to more negative values, indicating a higher tendency to corrode. For the soil solutions studied, the Ecorr shifted to more negative values, indicating that the corrosion process was under cathodic control. The values of icorr and 1/Rp tended to increase as the soil resistivity decreased. Moreover, there was good consistency between the corrosivity order of the studied soil solution obtained from electrochemical impedance spectroscopy and PDP measurements in the following order: Ob-Sh > Sh > Ja > Sa > Sf. A comprehensive assessment of the soil corrosivity based on various soil variables revealed that soil solutions of Ob-Sh and Sh are extremely corrosive, while the rest of the soil solutions are noncorrosive.