Improved frequency compensation is proposed for a three-stage amplifier with reduced total capacitance, improved slew rate, and reduced settling time. The proposed compensation uses an auxiliary feedback to increase the total effective compensation capacitance without loading the output node. The proposed compensation scheme is validated in simulation by implementing a three-stage amplifier driving 10 pF load capacitor in a 0.18 μm CMOS process. A detailed comparison of the compensation with a conventional nested Miller compensation is also presented. The simulation results showed a reduction in total compensation capacitance and improvement in slew rate compared to conventional nested Miller compensation and the other reported techniques in the literature.
In this article, we study the fractional form of a well-known dynamical system from mathematical biology, namely, the Lotka–Volterra model. This mathematical model describes the dynamics of a predator and prey, and we consider here the fractional form using the Rabotnov fractional-exponential (RFE) kernel. In this work, we derive an approximate formula of the fractional derivative of a power function in terms of the RFE kernel. Next, by using the spectral collocation method (SCM) based on the shifted Vieta–Lucas polynomials (VLPs), the fractional differential system is reduced to a set of algebraic equations. We provide a theoretical convergence analysis for the numerical approach, and the accuracy is verified by evaluating the residual error function through some concrete examples. The results are then contrasted with those derived using the fourth-order Runge-Kutta (RK4) method.
A frequency spectrum segmentation methodology is proposed to extract the frequency response of circuits and systems with high resolution and low distortion over a wide frequency range. A high resolution is achieved by implementing a modified Dirichlet function (MDF) configured for multi-tone excitation signals. Low distortion is attained by limiting or avoiding spectral leakage and interference into the frequency spectrum of interest. The use of a window function allowed for further reduction in distortion by suppressing system-induced oscillations that can cause severe interference while acquiring signals. This proposed segmentation methodology with the MDF generates an interleaved frequency spectrum segment that can be used to measure the frequency response of the system and can be represented in a Bode and Nyquist plot. The ability to simulate and measure the frequency response of the circuit and system without expensive network analyzers provides good stability coverage for reliable fault detection and failure avoidance. The proposed methodology is validated with both simulation and hardware.
1 January 2024 in Cultura Científica y Tecnológica
En este trabajo se evaluó una estrategia simple para aplicar iterativamente la regla de integración de Leibniz desde cálculo elemental a problemas operativos. La regla de integración de Leibniz (también conocida como “fórmula de integración por partes”) es una fórmula relativamente simple. Sin embargo, algunos problemas típicos de cálculo de antiderivadas requieren aplicar esta fórmula de forma iterativa. Lamentablemente, este proceso provoca soluciones erróneas y que requieren mucho tiempo por las diversas aplicaciones de la regla de Leibniz y la complejidad de los cálculos. La estrategia propuesta en el presente trabajo reduce el tiempo empleado para obtener las soluciones de aquellos problemas iterativos. Además, el procedimiento empleado es simple, fácil de describir algorítmicamente y produce resultados más rápidos. Para mostrar la eficiencia de esta estrategia, se realizó un estudio experimental con un grupo de estudiantes de pregrado de ingeniería en una universidad pública de México. La capacidad de estos estudiantes para utilizar reglas elementales de integración se demostró mediante una prueba preliminar y el grupo se dividió en dos subgrupos, a uno de los cuales se le enseñó la regla tradicional de Leibniz, mientras que el segundo aprendió la estrategia estudiada en este trabajo. Los resultados mostraron que el enfoque actual produce resultados decisivamente más rápidos que el método tradicional.
A novel frequency-to-voltage converter (FVC) based phase-locked loop (PLL) is proposed to overcome the inability of an FVC-based frequency-locked loop (FLL) to lock phase. The proposed dual-loop PLL adds variable phase-locking capability, such that the phase locking angle can vary from 0o – 360o. The additional variable phase-locking can be applied in data communication in the form of phase modulation. The design is targeted for a 0.5-µm CMOS process. The proposed design generates a 480MHz clock from a reference clock of 15MHz. In simulation, the proposed PLL locks within 3.56 µs while consuming 1.61 mW of power.