Sodium alginate is one of the most interesting and the most investigated and applied biopolymers due to its advantageous properties. Among them, easy, simple, mild, rapid, non-toxic gelation by divalent cations is the most important. In addition, it is abundant, low-cost, eco-friendly, bio-compatible, bio-adhesive, biodegradable, stable, etc. All those properties were systematically considered within this review. Carotenoids are functional components in the human diet with plenty of health benefits. However, their sensitivity to environmental and process stresses, chemical instability, easy oxidation, low water solubility, and bioavailability limit their food and pharmaceutical applications. Encapsulation may help in overcoming these limitations and within this review, the role of alginate-based encapsulation systems in improving the stability and bioavailability of carotenoids is explored. It may be concluded that all alginate-based systems increase carotenoid stability, but only those of micro- and nano-size, as well as emulsion-based, may improve their low bioaccessibility. In addition, the incorporation of other biopolymers may further improve encapsulation system properties. Furthermore, the main techniques for evaluating the encapsulation are briefly considered. This review critically and profoundly explains the role of alginates in improving the encapsulation process of carotenoids, suggesting the best alternatives for those systems. Moreover, it provides a comprehensive cover of recent advances in this field.

This study was performed to evaluate the surgical strategy in patients with calvarial tumours, in order to design and modify a robot-assisted trepanation system. A total of 75 patients underwent craniectomy for the treatment of calvarial tumours during the 10-year period from 1993 to 2002. The patients’ complaints, the size, location and histology of the tumour, and the various cranioplasty techniques used were analysed retrospectively. In a second procedure several craniectomies at typical locations according to the study’s results were performed in a laboratory setting using a hexapod robotic tool, constructed at the Helmholtz-Institute, RWTH Aachen University, and plastic model heads. The workflow was documented and the reproducibility and the accuracy of the procedure were registered. A total of 83 surgical procedures were performed on 75 patients. The majority (87 %) of lesions treated surgically were located in the frontal, temporal and anterior parts of the parietal region. Histological examination revealed benign lesions in 66 % of the patients and dural involvement in 46 %. According to these results craniectomies were performed using the robotic system. Mean positioning accuracy of the robotic system while milling was 0.24 mm, with a standard deviation of 0.04 mm, and maximum error under 1 mm. Craniectomies leaving a 1-mm layer of the tabula interna intact to ensure a healthy dura were performed in several regions successfully. The majority of calvarial tumours, requiring surgical treatment in our patients, were located in cosmetically relevant areas in which drilling can be carried out with the robotic trepanation system. Consequently, the surgical approach had to be planned carefully in order to achieve a good cosmetic outcome.

Composite coatings prepared by mixing 5 wt.% polyaniline with commercial alkyd-based paints were applied on carbon steel. The polyaniline emeraldine chloride salt was prepared by procedure recommended by IUPAC, including deprotonation by ammonia hydroxide, and reprotonation with sulfamic, succinic, citric, and acetic acids with different doping degrees or oxidation states. The steel samples with base and composite coatings were immersed in 3% NaCl and the corrosion current density was determined after 96 h in situ using the ASTM 1,10-phenanthroline method. The samples were also inspected by optical microscopy. It was shown that the composite coatings reduced the possibility of blister formations and delamination. The corrosion current density and the appearance of the corrosion products, whose area was determined by ImageJ software, closely followed the initial oxidation state of the polyaniline. It was also shown that damaged composite coatings with higher degrees of oxidized (doped) polyaniline were more prone to formation of corrosion products. The role of the initial state of the polyaniline is discussed. It is suggested that such behavior could be connected to the oxygen reduction reaction mechanism that proceeds mainly via two electron paths on the polyaniline particles, releasing a much smaller amount of hydroxyl ions, which is responsible for the delamination and blister formation of the commercial coatings.

The anodic oxidation of titanium implants is a practical, cost-effective method to enhance implant success, especially due to rising hypersensitivity concerns. This study investigated the electrochemical behavior, surface characteristics, and biocompatibility of anodized commercially pure titanium (cpTi, grade IV). Anodization is performed on polished, cleaned cpTi sheet samples in 1 M H₂SO₄ using a constant voltage of 15 V for 15 and 45 min. The color of the oxide layer is evaluated using the CIELab color space, while composition is analyzed by a scanning electron microscope (SEM) equipped with an energy dispersive spectrometer (EDS). Additionally, X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) are performed to identify and monitor the phase transformations of the formed titanium oxides. Corrosion measurements are performed in 9 g L⁻¹ NaCl, pH = 7.4, and show the excellent corrosion stability of the anodized samples in comparison with pure titanium. The biological response is assessed by determining mitochondrial activity and gene expression in human fibroblasts. Anodized surfaces, particularly Ti-45, promote higher mitochondrial activity and the upregulation of adhesion-related genes (N-cadherin and Vimentin) in human gingival fibroblasts, indicating improved biocompatibility and the potential for enhanced early soft tissue integration.