Aleksey N Bocharov

Dr. Aleksey N Bocharov

Joint Institute for High Temperatures, Moscow, Moskva, Russia
orcid

Research Focus & Metrics

Academic Career Length

26Years (2001-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 June 2018 in Journal of Physics D: Applied Physics
Verified
Journal Article
Closed access
VBV A Bityurin
V A Bityurin
ABAleksey N Bocharov
Aleksey N Bocharov
One of the possible applications of magnetohydrodynamic flow control is considered. Namely, the surface heat flux mitigation by means of magnetohydrodynamic (MHD) interaction in hypersonic flow around a blunt body. The 2D computational model realizes a coupled solution of chemically non-equilibrium ionized airflow in magnetic field. Heat- and mass-transfer due to the ablation of materials from the body surface is taken into account. Two cases of free-stream flow conditions are considered: moderate free-stream velocity (7500 m s −1 ) case and high free-stream velocity (11 000 m s −1 ) case. It is shown that the first flow case results in moderate ionization in the shock layer, while the second flow case results in high ionization. In the first case, the Hall effect is significant, and effective electrical conductivity in the shock layer is rather low. In the second case, the Hall effect reduces, and effective conductivity is high. Even if the Hall effect is strong, as in the first case, intensive MHD deceleration of the flow behind the shock is provided due to the presence of insulating boundaries, the bow shock front and non-conductive wall of the blunt body. In the second case, high effective conductivity provides a high intensity of MHD flow deceleration. In both cases, a strong effect of MHD interaction on the flow structure is observed. As a consequence, a noticeable reduction of the surface heat flux is revealed for reasonable values of magnetic induction. The new treatment of mechanism for the surface heat flux reduction is proposed, which is different from commonly used one assuming that MHD interaction increases the bow shock stand-off distance, and, consequently results in a decrease of the mean temperature drop across the shock layer. The new effect of ‘saturation of heat flux’ is discussed.

27 July 2020 in Journal of Physics D: Applied Physics
Verified
Journal Article
Closed access
PDF file
IMIvan A. Moralev
Ivan A. Moralev
PKPavel Nicolaevich Kazanskii
Pavel Nicolaevich Kazanskii
VBValentin Bityurin
Valentin Bityurin
ABAleksey N Bocharov
Aleksey N Bocharov
AFAleksandr A. Firsov
Aleksandr A. Firsov
Sergey B. LeonovSergey B. Leonov
Sergey B. Leonov
The arc discharge in magnetic field is one of the promising methods to intensify the kinematic transport in various systems. In this work, a detailed study of the flow arising in ambient air during the movement of a pulsed arc in external magnetic field was done. The study was performed using PIV and shadow flow visualization in parallel with the numerical modeling in a 2D MHD approach. The flow evolution during the electric current pulse was analyzed based on the vorticity generation equation. The flow relaxation after the current termination is considered, indicating a significant reduction of the gas velocity after the current termination due to rarefaction waves propagation. The typical flow structure remaining after the MHD interaction is a toroidal vortex with velocity magnitude up to 0.4 of the maximum arc movement velocity during the pulse.

1 April 2020 in Journal of Computational Physics
Verified
Journal Article
Closed access
ABAleksey N Bocharov
Aleksey N Bocharov
NENikolay Evstigneev
Nikolay Evstigneev
VPV.P. Petrovskiy
V.P. Petrovskiy
ORO.I. Ryabkov
O.I. Ryabkov
ITI.O. Teplyakov
I.O. Teplyakov

19 September 2019 in Journal of Physics D: Applied Physics
Verified
Journal Article
Closed access
MSM B Shavelkina
M B Shavelkina
PIP P Ivanov
P P Ivanov
ABAleksey N Bocharov
Aleksey N Bocharov
RAR Kh Amirov
R Kh Amirov
Results of experimental study of the one-step plasma-based process of the synthesis of unsupported graphene and hydrogenated graphene are presented. A direct current (DC) plasma torch is used, the pressure is held at 350 Тоrr, and the flow rates of plasma forming gas (helium) and carbon source (propane–butane mixture) are kept constant. An influence of reactor geometry on the properties of synthesized product is investigated. Graphene and hydrogenated graphene were synthesized in an appreciable rate in the plasma jet volume under equal conditions using cylindrical and conical reactors accordingly. Synthesized graphene materials are characterized using electron microscopy, Raman spectroscopy, x-ray, and XPS analysis, confirming the existence of graphene and of hydrogenated graphene (graphane). In order to examine an influence of input parameters on the process of the synthesis of graphene materials, the quasi-1D numerical flow model is used to calculate the distributions of temperature and velocity within the reactor channel. The key role of the temperature distribution within the reactor in the synthesis of graphene materials is established. Cylindrical flow channel provides higher temperatures compared with the conical channel. It affects the flow composition at the outlet. Under lower temperature, the flow contains in addition to condensed carbon a great amount of hydrocarbons CH, which is favorable for the production of hydrogenated graphene. Under higher temperature, the pure graphene is synthesized, since the outlet flow has the carbon mainly in the condense phase, the quantity of CH being insignificant.

16 October 2020 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Irina V. AntonovaIrina V. Antonova
Irina V. Antonova
MSMarina Shavelkina
Marina Shavelkina
AIArtem I. Ivanov
Artem I. Ivanov
RSRegina A. Soots
Regina A. Soots
Peter IvanovPeter Ivanov
Peter Ivanov
ABAleksey N Bocharov
Aleksey N Bocharov
The possibility of graphene synthesis (the bottom-up approach) in plasma and the effective control of the morphology and electrical properties of graphene-based layers were demonstrated. Graphene flakes were grown in a plasma jet generated by a direct current plasma torch with helium and argon as the plasma-forming gases. In the case of argon plasma, the synthesized graphene flakes were relatively thick (2–6 nm) and non-conductive. In helium plasma, for the first time, graphene with a predominance of monolayer flakes and high conductivity was grown in a significant amount using an industrial plasma torch. One-dimensional (1D) flow modeling shows that the helium plasma is a less charged environment providing the formation of thinner graphene flakes with low defect density. These flakes might be used for a water-based suspension of the graphene with PEDOT:PSS (poly(3,4-ethylenedioxythiophene): polystyrene sulfonate) composite to create the structures employing the 2D printing technologies. Good structural quality, low layer resistance, and good mechanical strength combined with the ability to obtain a large amount of the graphene powder, and to control the parameters of the synthesized particles make this material promising for various applications and, above all, for sensors and other devices for flexible electronics and the Internet of things ecosystem.

7 April 2020 in Materials
Verified
Journal Article
Open access
PDF file
MSMarina Shavelkina
Marina Shavelkina
Peter IvanovPeter Ivanov
Peter Ivanov
ABAleksey N Bocharov
Aleksey N Bocharov
RARavil Amirov
Ravil Amirov
Synthesis of graphene materials in a plasma stream from an up to 40 kW direct current (DC) plasma torch is investigated. These materials are created by means of the conversion of hydrocarbons under the pressure 350–710 Torr without using catalysts, without additional processes of inter-substrate transfer and the elimination of impurities. Helium and argon are used as plasma-forming gas, propane, butane, methane, and acetylene are used as carbon precursors. Electron microscopy and Raman imaging show that synthesis products represent an assembly of flakes varying in the thickness and the level of deformity. An occurrence of hydrogen in the graphene flakes is discovered by X-ray photoelectron spectroscopy, thermal analysis, and express-gravimetry. Its quantity depends on the type of carrier gas. Quasi-one-dimensional approach under the local thermodynamic equilibrium was used to investigate the evolution of the composition of helium and argon plasma jets with hydrocarbon addition. Hydrogen atoms appear in the hydrogen-rich argon jet under higher temperature. This shows that solid particles live longer in the hydrogen-rich environment compared with the helium case providing some enlargement of graphene with less hydrogen in its structure. In conclusion, graphene in flakes appears because of the volumetric synthesis in the hydrogen environment. The most promising directions of the practical use of graphеne flakes are apparently related to structural ceramics.