The possibility of graphene synthesis (the bottom-up approach) in plasma and the effective control of the morphology and electrical properties of graphene-based layers were demonstrated. Graphene flakes were grown in a plasma jet generated by a direct current plasma torch with helium and argon as the plasma-forming gases. In the case of argon plasma, the synthesized graphene flakes were relatively thick (2–6 nm) and non-conductive. In helium plasma, for the first time, graphene with a predominance of monolayer flakes and high conductivity was grown in a significant amount using an industrial plasma torch. One-dimensional (1D) flow modeling shows that the helium plasma is a less charged environment providing the formation of thinner graphene flakes with low defect density. These flakes might be used for a water-based suspension of the graphene with PEDOT:PSS (poly(3,4-ethylenedioxythiophene): polystyrene sulfonate) composite to create the structures employing the 2D printing technologies. Good structural quality, low layer resistance, and good mechanical strength combined with the ability to obtain a large amount of the graphene powder, and to control the parameters of the synthesized particles make this material promising for various applications and, above all, for sensors and other devices for flexible electronics and the Internet of things ecosystem.
Synthesis of graphene materials in a plasma stream from an up to 40 kW direct current (DC) plasma torch is investigated. These materials are created by means of the conversion of hydrocarbons under the pressure 350–710 Torr without using catalysts, without additional processes of inter-substrate transfer and the elimination of impurities. Helium and argon are used as plasma-forming gas, propane, butane, methane, and acetylene are used as carbon precursors. Electron microscopy and Raman imaging show that synthesis products represent an assembly of flakes varying in the thickness and the level of deformity. An occurrence of hydrogen in the graphene flakes is discovered by X-ray photoelectron spectroscopy, thermal analysis, and express-gravimetry. Its quantity depends on the type of carrier gas. Quasi-one-dimensional approach under the local thermodynamic equilibrium was used to investigate the evolution of the composition of helium and argon plasma jets with hydrocarbon addition. Hydrogen atoms appear in the hydrogen-rich argon jet under higher temperature. This shows that solid particles live longer in the hydrogen-rich environment compared with the helium case providing some enlargement of graphene with less hydrogen in its structure. In conclusion, graphene in flakes appears because of the volumetric synthesis in the hydrogen environment. The most promising directions of the practical use of graphеne flakes are apparently related to structural ceramics.
Pulsed laser ablation in liquids has become a simple, fast, and environmentally friendly method for the synthesis of carbon nanostructures since it does not require the use of toxic chemicals. The great advantage of this method is its ability to control the size, shape, and structure of the products by combining parameters of the laser, target material, and liquid. By ablation of two types of synthetic graphite with a high-power copper vapor laser in ethanol and distilled water, spherical graphene was obtained. The composition of the gas phase and the condensation temperature of carbon in the temperature range of 1000–5000 K were determined by means of thermodynamic modeling. The precursors for the formation of spherical graphene during laser ablation in alcohol and water are discussed.
The development of an integral model of the processes in a gasification reactor is discussed for analyzing and optimizing technical devices with allowance for the finite rate of a key heterogeneous reaction in the calculation of the device energy and the product composition. A comparison with data obtained under thermodynamic equilibrium is given. Based on this, and a comparison of characteristics of various types of gasifiers, a conclusion is made about the expediency of their application in concrete problems, particularly for the use of gasification in a recycling technology. Using a developed software, an alternative schematic of the entrained flow gasifier is considered and optimized.
21 September 2021 in Advanced Engineering Materials
Results of experimental investigation of the influence of C:H ratio in precursor composition on properties of carbon nanostructures synthesized in helium plasma jets are presented. Intermediate products in the high-temperature region of the plasma jet were studied by performing thermodynamic analysis.