This work presents fabricated silica microstructured optical fiber with special equiangular spiral six-ray geometry, an outer diameter of 125 µm (that corresponds to conventional commercially available telecommunication optical fibers of ratified ITU-T recommendations), and induced chirality with twisting of 200 revolutions per minute (or e.g., under a drawing speed of 3 m per minute, 66 revolutions per 1 m). We discuss the fabrication of twisted microstructured optical fibers. Some results of tests, performed with pilot samples of designed and manufactured stellar chiral silica microstructured optical fiber, including basic transmission parameters, as well as measurements of near-field laser beam profile and spectral and pulse responses, are represented.

We present new type of silica graded index laser-optimized multimode optical fibers (LOMF) with extremely enlarged core diameter up to 100 μm and “typical” “telecommunication” cladding diameter 125 μm. This optical fiber was designed for harsh environment Gigabit onboard cable systems and industrial networks. It differs by special optimized graded refractive index profile, providing low differential mode delay (DMD) for selected guided modes. We present some results of tests, performed for manufactured pilot 520 m length of described LOMF 100/125, concerned with its geometry properties as well as key transmission parameters—attenuation and DMD map.

This work presents a fabricated silica few-mode microstructured optical fiber (MOF) with a special six GeO₂-doped core geometry, an outer diameter of 125 µm (that corresponds to conventional commercially available telecommunication optical fibers), and improved induced twisting up to 500 revolutions per 1 m (under a rotation speed of 1000 revolutions per meter with a drawing speed of ~2 m per minute). The article discusses some technological aspects and issues of manufacturing the above-described twisted MOFs with complicated structures and geometry as GeO₂-doped silica supporting elements for them. We present results of some measurements performed for fabricated samples of chiral silica six-GeO₂-doped-core few-mode MOFs with various orders of twisting and both step and graded refractive indexes of “cores”. These tests contain research on MOF geometrical parameters, attenuation, and measurements of the far-field laser beam profile.

This work presents the first instance of a silica few-mode microstructured optical fiber (MOF) being successfully fabricated with a hollow GeO₂-doped ring core and by strongly inducing twisting up to 790 revolutions per meter. Some technological issues that occurred during the manufacturing of the GeO₂-doped supporting elements for the large hollow cores are also described, which complicated the spinning of the MOFs discussed above. We also provide the results of the tests performed for the pilot samples—designed and manufactured using the untwisted and twisted MOFs described above—which were characterized by an outer diameter of 65 µm, a hollow ring core with an inner diameter of 30.5 µm, under a wall thickness of 1.7 µm, and a refractive index difference of Δn = 0.030. Moreover, their geometrical parameters, basic transmission characteristics, and the measurements of the far-field laser beam profile patterns are also provided.

We present alternative method for implementation of secure data transmission channel protected over physical layer for the "first/last mile" segment of intra-corporate network by specialized fiber optic link. Proposed solution is based on application of operating in a few-mode laser-based regime multimode optical fibers with special refractive index profile providing optical pulse strong uniquely distortions due to differential mode delay effect that allows to consider those optical fibers as "encryptor". Therefore, transmitted traffic is strongly distorted and it is unable to be processed without corresponding "decryptor" which might be either also another one optical fiber with "inversed" refractive index profile in relation to the "encryptor"-fiber or electronic dispersion compensator device modified for such application. This work is concerned with configurations of proposed "crypto" fiber optic link as well as brief description of math apparatus for design it. Some results of preliminary simulations are also represented.

This work presents first time successfully fabricated silica few-mode microstructured optical fiber (MOF) with hollow GeO2-doped ring core and strongly induced twisting up to 790 revolutions per meter. Some technological issues for manufacturing of GeO2-doped supporting elements for large hollow cores as well as described above complicated spun MOFs are discussed. We introduce some results of tests, performed for pilot samples of designed and manufactured described above untwisted and twisted MOFs with outer diameter 65 µm and hollow ring core inner diameter 30.5 µm under wall thickness 1.7 µm and refractive index difference n=0.030, including their geometrical parameters, basic transmission characteristics and measurements of far-field laser beam profile patterns.