The aim of this study was to convert the spent liquors obtained from acidic sulfite and neutral sulfite semi-chemical (NSSC) pulping processes into protein-rich fungal biomass. Three filamentous fungi, Aspergillus oryzae, Mucor indicus, and Rhizopus oryzae, were cultivated on the diluted spent liquors in an airlift bioreactor with airflow of 0.85 vvm at 35 °C and pH 5.5. Maximum values of 10.17 g, 6.14 g, and 5.47 g of biomass per liter of spent liquor were achieved in the cultivation of A. oryzae, M. indicus, and R. oryzae on the spent sulfite liquor (SSL) diluted to 60%, respectively, while A. oryzae cultivation on the spent NSSC liquor (SNL) diluted to 50% resulted in the production of 3.27 g biomass per liter SNL. The fungal biomasses contained 407 g to 477 g of protein, 31 g to 114 g of fat, 56 g to 89 g of ash, and 297 g to 384 g of alkali-insoluble material (AIM) per kg of dry biomass. The amino acids, fatty acids, and mineral elements composition of the fungal biomasses corresponded to the composition of commercial protein sources especially soybean meal. Among the fungi examined, A. oryzae showed better performance to produce protein-rich fungal biomass during cultivation in the spent liquors.
The inevitable destructive effects of moisture and temperature are obvious in cellulosic and nanocellulosic substrates. These materials are the main foundations of interdependent industries that produce products such as currency notes or high-quality packaging for sanitary, cosmetics, or ammunition in the defense industry. Therefore, it is essential to develop procedures to eliminate problems arising from humidity and fire to improve the quality of these green and sustainable materials. The production of waterproof and flame-resistant cellulose-based substrates has drawn increasing attention to resolve these drawbacks. In this review paper, we have initially summarized the most accessible cellulosic substrates, different kinds of nanocellulose, and the general information about water repellents and intumescent fireproof surfaces. Then, the potential and necessity of using cellulosic biobased substrates are addressed for use in modified shapes as waterproof and fire inhibitor coatings. Cost-effective, eco-friendly, and durable, dual-function coatings are also introduced as future challenges, which are exploited as water-repellents and flame-retardant cellulose-based surfaces for pulp and paper applications.
Nano-lignocellulose (NLC) and lignin-free nanocellulose (nano-holocellulose, NHC) were used in paper coating to investigate their effect on coating layer quality and offset printing. The NLC was produced by microfluidisation of unbleached secondary fibres while the reference NHC was obtained from the same fibre source after lignin removal (OHEPH bleaching), following the same mechanical process. TEMPO-mediated oxidation of the fibres prior to microfluidisation was applied to increase the electrostatic charge and hydrophilicity of the nanofibrils. The coatings, displaying given surface morphology and energy, were applied on Kraft, printing-grade papers at three grammage levels. The structure of the coated and uncoated (reference) papers were accessed (SEM and AFM) and IGT printing was carried out to determine the print density, print gloss, rub-off resistance, surface energy, roughness, ink transfer, dry pick resistance, water interference and set-off. The results highlight the important effect of residual lignin or type of nanocellulose on the coating layer and the development of offset printing properties. It was observed that roughness was a key factor leading to a deterioration of the print properties, predominantly affecting the NLC coating. Considering the lower hydrophilicity of NLC, an alternative dispersion with water-alcohol mixtures is proposed. By using this dispersing medium, tailorable surface coverage, surface smoothness, ink acceptance and improved printability was achieved. We show that under these conditions and compared to NHC, NLC is equally effective as a coating layer.
A new fractionation protocol for wheat straw organosolv lignin was developed on the basis of the dominating H-bonding orientations of its components. Acetone as H-bond accepting aprotic polar solvent and methanol as H-bond donating and accepting protic polar solvent were used in sequence. Obtained fractions were structurally and thermally analysed. The protocol allowed for the generation of purified lignin fractions and the isolation of a novel, yet unobserved lignin carbohydrate complex (LCC) fraction. This LCC fraction was found to contain exclusively phenyl glycosides and γ-esters as LCC motifs.
In this study, the effects of surface roughness, fluid velocity, and surface inclination on hot spot subcooled flow boiling are investigated experimentally. The experimental set-up consists of a circular heater that is placed on the lower wall of a channel. Based on the experimental data, two new independent empirical correlations are presented. The experimental results show that by increasing the surface roughness and fluid velocity, the surface heat fluxes increase. Inclination of the surface in either direction yields a higher heat transfer coefficient in comparison to its horizontal position when the surface is smooth and lower for the rough surface.