In this article, multiwalled carbon nanotubes (MWCNTs) have been synthesized on the surface of a diatomite mineral impregnated with transition metal salts using a propane-butane mixture in a chemical vapor deposition reactor at atmospheric pressure. The catalyst concentration and synthesis temperature have been varied in order to understand their effects on the formation of MWCNTs and their morphology. Diatomite was chosen as a catalyst carrier due to its elemental composition. It is mainly composed of amorphous silica, quartz and also contains such metals as Fe, K, Ca, Mn, Cr, Ti, and Zn, which makes it a promising material for use as a catalyst carrier when synthesizing carbon nanotubes (CNTs) by catalytic chemical vapor deposition (C-CVD). For the synthesis of carbon nanotubes by C-CVD on the surface of the diatomite, the following salts were used as a catalyst: CoCl2·6H2O; Ni(NO3)2·6H2O, and the concentrations of the solutions were 0.5; 1.0 and 1.5 M. Natural diatomite was characterized by X-ray diffraction analysis (XRD) and Scanning Electron Microscopy (SEM) analysis.
The development of bio-derived composites represents a sustainable and cost-effective strategy for advanced energy storage applications. In this work, a porous carbon/nickel oxide (NiO) composite was synthesized from orange peel via carbonization at 500 °C followed by KOH activation at 700 °C and subsequent hydrothermal NiO modification. The resulting material exhibited a hierarchical porous structure with a high specific surface area (2120 m2 g−1 for OP_500_700 and 1968 m2 g−1 for NiO-modified OP_500_700_0.1M), with both values being significantly higher than that of the non-activated OP_500 (3.40–18.12 m2 g−1). Electrochemical evaluation revealed that the NiO-functionalized composite achieved a specific capacitance of 306.0 F g−1 at 5 mV s−1 and 281.5 F g−1 at 2 A g−1, surpassing the pristine activated carbon (281.9 F g−1 and 259.6 F g−1, respectively). In addition, both electrodes demonstrated excellent cycling stability, retaining more than 80% capacitance after 5000 charge–discharge cycles at a high current density of 20 A g−1, while the NiO-modified electrode further benefited from a self-activation effect leading to >100% retention. These findings emphasize the synergistic effects of hierarchical porosity and NiO pseudocapacitance, establishing orange peel-derived carbon/NiO composites as scalable and sustainable electrode materials for next-generation supercapacitors.