One of the most promising new applications of remote observation satellite systems (RO) is the near-shore bathymetry estimation based on spaceborn multispectral imageries. In recent years, many experiments aiming to estimate bathymetry in optically shallow water with the use of remote optical observations have been presented. In this paper, optimal models of satellite derived bathymetry (SDB) for relatively turbid waters of the South Baltic Sea were presented. The obtained results were analysed in terms of depth error estimation, spatial distribution, and overall quality. The models were calibrated based on sounding (in-situ) data obtained by a single-beam echo sounder, which was retrieved from the Maritime Office in Gdynia, Poland. The remote observations for this study were delivered by the recently deployed European Space Agency Sentinel-2 satellite observation system. A detailed analysis of the obtained results has shown that the tested methods can be successfully applied for the South Baltic region at depths of 12-18 meters. However, significant limitations were observed. The performed experiments have revealed that the error of model calibration, expressed in meters (RMSE), equals up to 10-20% of the real depth and is, generally, case dependent. To overcome this drawback, a novel indicator of determining the maximal SDB depth was proposed. What is important, the proposed SDB quality indicator is derived only on the basis of remotely registered data and therefore can be applied operationally.
Current trends of development of satellite derived bathymetry (SDB) models rely on applying calibration techniques including analytical approaches, neuro-fuzzy systems, regression optimization and others. In most of the cases, the SDB models are calibrated and verified for test sites, that provide favorable conditions for the remote derivation of bathymetry such as high water clarity, homogenous bottom type, low amount of sediment in the water and other factors. In this paper, a novel 3-dimensional geographical weighted regression (3GWR) SDB technique is presented, it binds together methods already presented in other studies, the geographically weighted local regression (GWR) model, with depth dependent inverse optimization. The proposed SDB model was calibrated and verified on a relatively difficult test site of the South Baltic near-shore areas with the use of multispectral observations acquired by a recently launched Sentinel-2 satellite observation system. By conducted experiments, it was shown that the proposed SDB model is capable of obtaining satisfactory results of RMSE ranging from 0.88 to 1.23[m] depending on the observation and can derive bathymetry for depths up to 12m. It was also shown, that the proposed approach may be used operationally, for instance, in the continuous assessment of temporal bathymetry changes, for areas important in the context of ensuring local maritime safety.
Over the past few years considerable advances in sonar technology, spatial positioning capabilities and computer processing power have lead to significant improvements in mapping, imaging and technologies of seafloor exploration. Recently, modern multibeam echosounder systems (MBES) capable of recording backscatter data for the whole water column, not just for the seabed, have become available thus providing data allowing for visualization and analysis of objects other than the seabed such as single fish, fish schools or pollution. Unlike bathymetric sonars, which only capture the seafloor, multibeam systems produce very large amounts of data during surveys. Because of this, storing the data collected during hydrographic or scientific cruises becomes a crucial problem. In this context, the paper proposes a new approach for efficient reduction and storage of MBES records. The results of a sample implementation of the algorithm being tested on several different sets of MBES data are also discussed.
Discharge events induced by mixture of snowmelt and rainfall are strongly nonlinear due to consequences of rain-on-snow phenomena and snowmelt dependence on energy balance. However, they received relatively little attention, especially in high-resolution discharge forecasting. In this study, we use Random Forests models for 24 h discharge forecasting in 1 h resolution in a 105.9 km urbanized catchment in NE Poland: Biala River. The forcing data are delivered by Weather Research and Forecasting (WRF) model in 1 h temporal and 4 × 4 km spatial resolutions. The discharge forecasting models are set in two scenarios with snowmelt and rainfall and rainfall only predictors in order to highlight the effect of snowmelt on the results (both scenarios use also pre-forecast discharge based predictors). We show that inclusion of snowmelt decrease the forecast errors for longer forecasts’ lead times. Moreover, importance of discharge based predictors is higher in the rainfall only models then in the snowmelt and rainfall models. We conclude that the role of snowmelt for discharge forecasting in mixed snowmelt and rainfall environments is in accounting for nonlinear physical processes, such as initial wetting and rain on snow, which cannot be properly modelled by rainfall only.
Pollution in the Port of Gdynia can encompass various types of substances and contaminants that affect the quality of water and sediment in this region. Ships entering and leaving the port can release pollutants such as oil, fuel, waste, and chemicals into the water. Controlling and monitoring these pollutants is a crucial part of environmental stewardship. In recent years, uncrewed units have been increasingly in use for in situ water and sediment sampling. Boat-based water sampling crews face significant safety risks at sea. Eliminating the need for a boat-based sampling crew, uncrewed units allow sampling from locations that are difficult to access by traditional sampling methods. To validate the HydroDron-1 method, water samples and bottom sediments were collected from five basins in the Port of Gdynia using the HydroDron-1 method and accredited sampling methods. The values of measured parameters were similar for both methods. Using the HydroDron-1 method at the Port of Gdynia has the potential to improve safety while reducing sampling costs and increasing data collection. The project was implemented as part of the POLNOR 2019 Call program, announced by the National Center for Research and Development (NCRD): “Marine port surveillance and observation system using mobile unmanned research units” NOR/POLNOR/MPSS/0037/2019.
In recent years precise and up-to-date information regarding seabed depth has become more and more important for companies and institutions that operate on coastlines. While direct, in-situ measurements are performed regularly, they are expensive, time-consuming and impractical to be performed in short time intervals. At the same time, an ever-increasing amount of satellite imaging data becomes available. With these images, it became possible to develop bathymetry estimation algorithms that can predict seabed depth and utilize them systematically. Since there are a number of theoretical approaches, physical models, and empirical techniques to use satellite observations in order to estimate depth in the coastal zone, the presented article compares the performance and precision of the most common one to modern machine learning algorithms. More specifically, the models based on shallow neural networks, decision trees and Random Forest algorithms have been proposed, investigated and confronted with the performance of pure analytical models. The particular proposed machine learning models differ also in a set of satellite data bands used as an input as well as in applying or not geographical weighting in the learning process. The obtained results point towards the best performance of the regression tree algorithm that incorporated as inputs information about data localization, raw reflectance data from four satellite data bands and a quotient of logarithms of B2 and B3 bands. The study for the paper was performed in relatively optically difficult and spatially variant conditions of the south Baltic coastline starting at Szczecin, Poland on the west (53°26’17’’ N, 14°32’32’’ E) to Hel peninsula (54°43’04,3774’’ N 18°37’56,9175’’ E). The reference bathymetry data was acquired from Polish Marine Administration. It was obtained through profile probing with single-beam sonar or direct in-situ probing.