Angel Jesus Morales Robles

Mr. Angel Jesus Morales Robles

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 July 2023 in Materials
Verified
Journal Article
Open access
PDF file
Martin Ortiz-DominguezMartin Ortiz-Dominguez
Martin Ortiz-Dominguez
Angel Jesus Morales RoblesAngel Jesus Morales Robles
Angel Jesus Morales Robles
OGOscar Armando Gómez-Vargas
Oscar Armando Gómez-Vargas
TCTeresita de Jesús Cruz-Victoria
Teresita de Jesús Cruz-Victoria
In the present work, two mathematical diffusion models have been used to estimate the growth of the iron monoboride and diiron boride coating formed on AISI 420 steel. The boronizing of the steel was carried out with the solid diffusion packing method at a boronizing temperature of 1123 K–1273 K. Experimental results show the two-coating system consists of an outer monoboride and an inner diiron boride coating with a predominantly planar structure at the propagation front. The depth of the boride coating increases according to temperature and treatment time. A parabolic curve characterizes the propagation of the boride coatings. The two proposed mathematical models of mass transfer diffusion are founded on the solution corresponding to Fick’s second fundamental law. The first is based on a linear boron concentration–penetration profile without time dependence, and the second model with time dependence (exact solution). For both models, the theoretical law of parabolic propagation and the average flux of boron atoms (Fick’s first fundamental law) at the growth interfaces (monoboride/diiron boride and diiron boride/substrate) are considered to estimate the propagation of the boride coatings (monoboride and diiron boride). To validate the mathematical models, a programming code is written in the MATLAB program (adaptation 7.5) designed to simulate the growth of the boride coatings (monoboride and diiron boride). The following parameters are used as input data for this computer code: (the layer thicknesses of the FeB and Fe2B phases, the operating temperature, the boronizing time, initial formation time of the boride coating, the surface boron concentration limits, FeB/Fe2B and Fe2B/Fe growth interfaces, and the mass transfer diffusion coefficient of boron in the iron monoboride and diiron boride phases). The outputs of the computer code are the constants εFeB and εFe2B. The assessment of activation energies of AISI 420 steel for the two mathematical models of mass transfer is coincident (QFeB=221.9 kJ∙mol−1 and QFe2B=209.1 kJ∙mol−1). A numerical analysis was performed using a standard Taylor series for clarification of the proximity between the two models. SEM micrographs exhibited a strong propensity toward a flat-fronted composition at expansion interfaces of the iron monoboride and diiron boride coating, confirmed by XRD analysis. Tribological characterizations included the Vickers hardness test method, pin-on-disc, and Daimler–Benz Rockwell-C indentation adhesion tests. After thorough analysis, the energies were compared to the existing literature to validate our experiment. We found that our models and experimental results agreed. The diffusion models we utilized were crucial in gaining a deeper understanding of the boronizing behavior of AISI 420 steel, and they also allowed us to predict the thicknesses of the iron monoboride and diiron boride coating. These models provide helpful approaches for predicting the behavior of these steels.

5 June 2024 in Metals
Verified
Journal Article
Open access
PDF file
Martin Ortiz-DominguezMartin Ortiz-Dominguez
Martin Ortiz-Dominguez
Angel Jesus Morales RoblesAngel Jesus Morales Robles
Angel Jesus Morales Robles
Oscar Armando Gomez-VargasOscar Armando Gomez-Vargas
Oscar Armando Gomez-Vargas
GMGeorgina Moreno-González
Georgina Moreno-González
The following investigation focused on examining the kinetics of Fe2B coating formation on the surface of ASTM A681 steel during the powder-pack boronizing process. The study measured Fe2B coating thicknesses at various temperatures and exposure times to confirm the diffusion-controlled growth mechanism during boronizing. Five distinct mathematical models were devised to determine the boron diffusion coefficients in Fe2B coatings. Understanding the growth kinetics of boronize coatings is imperative as it facilitates the optimization and automation of industrial processes. This ensures the efficient and consistent production of boronize coatings on cutting tools, such as drills and milling cutters, due to their high hardness and wear resistance. The value of the activation energy estimated with five mathematical diffusion models for the Fe2B coating was 209.8 kJ∙mol−1. The X-ray diffraction technique was used to identify the presence of the iron boronize phase. Tribological studies were also performed to evaluate the coefficient of friction (COF) of the boronized (0.256) and untreated (0.781) samples, having a 300% positive effect of the boronize coating on wear resistance. Finally, the models were empirically validated for two supplementary treatment conditions for 1223 K for 3 h and 1273 K for 1.5 h, where the percentage error for both conditions was estimated to be approximately 2.5%.

31 October 2024 in Materials
Verified
Journal Article
Open access
PDF file
Angel Jesus Morales RoblesAngel Jesus Morales Robles
Angel Jesus Morales Robles
Martin Ortiz-DominguezMartin Ortiz-Dominguez
Martin Ortiz-Dominguez
Oscar Armando Gomez-VargasOscar Armando Gomez-Vargas
Oscar Armando Gomez-Vargas
MMMaría de la Luz Moreno-González
María de la Luz Moreno-González
This study examined the development of Fe2B (diiron boronize) coatings on the surface of 35NiCrMo4 steel through the thermochemical surface hardening process called boronizing. The morphology and thickness of the boronize coatings were assessed using Scanning Electron Microscopy (SEM) and optical microscopy (OM). A novel mathematical mass transfer model was developed to estimate the diffusion coefficients of boron in hard coating. The presence of uniformly distributed boronize coatings with a typical sawtooth pattern on the surface of the substrate was confirmed. The boronize coating’s chemical composition and phase constituents were analyzed utilizing X-ray energy dispersive spectroscopy (EDS) and X-ray diffraction analysis (XRD). The study confirmed the presence of a single-phase boronize coating (Fe2B). Furthermore, microhardness tests indicated that the boronized specimen’s surface demonstrated an average hardness of approximately 1953 HV. The wear study were conducted using the pin-on-disk method under dry debonding conditions at room temperature to estimate the coefficient of friction (COF) of the boronized (average ≈ 0.35) and untreated (0.725) specimens. The results revealed approximately 200% improvement in wear resistance due to the boronized coating. The empirical validation of the mathematical model was carried out for two additional boronizing conditions at 1223 K for 3 h and 1273 K for 1.5 h, resulting in an estimated percentage error of around 2.5% for both conditions. Additionally, an ANOVA analysis was performed, taking into account the temperature and time factors. The findings indicate that both factors exert a substantial influence on the dependent variable (u), with temperature (T) contributing 64.68%, time (t) contributing 27.37%, and the interaction of both factors (T × t) contributing 5.13%.

5 July 2024 in Ingenio y Conciencia Boletín Científico de la Escuela Superior Ciudad Sahagún
Verified
Journal Article
Open access
PDF file
Angel Jesus Morales RoblesAngel Jesus Morales Robles
Angel Jesus Morales Robles
Martin Ortiz-DominguezMartin Ortiz-Dominguez
Martin Ortiz-Dominguez
ELEdgar Cardoso Legorreta
Edgar Cardoso Legorreta
AAArturo Cruz Avilés
Arturo Cruz Avilés
En este trabajo se estudió la influencia del potencial químico de boro en el crecimiento de la capa de boruro de hierro Fe2B durante el tratamiento termoquímico de borurización en caja, para esto se aplicó el tratamiento en muestras de acero ASTM A36 empleando un agente borurante comercial el cual se reutilizo en tres ciclos reduciendo su potencial; de igual forma se varió tiempo y la temperatura de tratamiento. Se estudió la cinética del proceso a partir de los resultados experimentales mediante un modelo de difusión y un modelo estadístico. Los parámetros del modelo de difusión revelaron que la energía de activación no se vio afectada por la disminución del potencial químico y se determinó un valor promedio Q=158.62 kJ·mol-1 similar a los datos de la literatura para este acero; por otro lado, el tiempo de incubación t0 y el coeficiente pre-exponencial D0 si se vieron afectados. Se planteó un diseño de experimento factorial 4x4x3 y se realizó un análisis estadístico ANOVA y un ajuste a un modelo de regresión general; los resultados revelaron que las variables ciclo, temperatura y tiempo tuvieron una contribución en el espesor de la capa Fe2B del 39 %, 25.79 %, y 19.05 % respectivamente. Ambas metodologías contribuyen al control del proceso ya que permiten simular el espesor de la capa en función de sus variables, dichos modelos se pueden optimizar empleando herramientas como los diagramas de contorno y los resultados del análisis estadístico, y con esto lograr una reducción en el consumo energético y los consumibles del proceso.

5 January 2025 in Ingenio y Conciencia Boletín Científico de la Escuela Superior Ciudad Sahagún
Verified
Journal Article
Open access
PDF file
Martin Ortiz-DominguezMartin Ortiz-Dominguez
Martin Ortiz-Dominguez
Angel Jesus Morales RoblesAngel Jesus Morales Robles
Angel Jesus Morales Robles
AAArturo Cruz Avilés
Arturo Cruz Avilés
JZJorge ZUNO Zuno-Silva
Jorge ZUNO Zuno-Silva
Este trabajo de investigación se enfoca en el crecimiento de los recubrimientos Fe2B formadas sobre la superficie del acero 35NiCrMo4 durante el proceso de borurización sólida. La morfología y el grosor de los recubrimientos de boruro se evaluaron mediante Microscopía Electrónica de Barrido (MEB) y microscopía óptica (MO). Se propuso un nuevo modelo matemático de transferencia de masa para determinar los coeficientes de difusión del boro en los recubrimientos de Fe2B. Se identificó la presencia de recubrimientos de boruro con morfología de dientes de sierra, distribuidas uniformemente por la superficie del sustrato. La composición química y los constituyentes de fase de la capa de boruro se examinaron mediante espectroscopia de dispersión de energía de rayos X (EDS) y análisis de difracción de rayos X (XRD). Como resultado de estos análisis, se detectó la presencia de una capa de boruro monofásica (Fe2B). Las pruebas de microdureza indicaron que la superficie de la muestra borurada tenía una dureza media de alrededor de 1900 HV. Se realizaron pruebas de desgaste utilizando el método de pin on disc en condiciones de deslizamiento en seco a temperatura ambiente, para evaluar el coeficiente de fricción (COF) de las muestras boruradas (promedio ≈ 0.35) y no tratadas (0.725), obteniéndose un efecto positivo de aproximadamente 200% del recubrimiento borurado sobre la resistencia al desgaste. El modelo matemático se validó empíricamente para dos condiciones de tratamiento suplementarias para 1223 K durante 3 h y 1273 K durante 1.5 h, donde el error porcentual para ambas condiciones se estimó alrededor de 2.5%. Por último, se realizó un análisis ANOVA donde se consideraron los factores de temperatura y tiempo, el estudio sugiere que los factores tienen un efecto significativo sobre la variable dependiente (u), donde la temperatura (T) contribuye con un 64.68%, el tiempo (t) con un 27.37% y la combinación de ambos factores (T×t) con un 5.13%.

5 January 2025 in Ingenio y Conciencia Boletín Científico de la Escuela Superior Ciudad Sahagún
Verified
Journal Article
Open access
PDF file
AAArturo Cruz Avilés
Arturo Cruz Avilés
Martin Ortiz-DominguezMartin Ortiz-Dominguez
Martin Ortiz-Dominguez
Angel Jesus Morales RoblesAngel Jesus Morales Robles
Angel Jesus Morales Robles
El acero es un recurso natural no renovable, la producción de acero en el sector manufacturero es el que más emisiones de gases efecto invernadero tiene y esto se debe que a que en su proceso de producción se utiliza carbón con al alto contenido de carbono. En el presente trabajo se aborda como se relaciona el acero con el cambio climático y se recomiendan otras opciones de producción de acero para disminuir las emisiones contaminantes.