Owing to its excellent mechanical properties and aesthetic tooth-like appearance, lithium disilicate glass–ceramic is more attractive as a crown for dental restorations. In this study, lithium disilicate glass–ceramics were prepared from SiO2–Li2O–K2O–P2O5–CeO2 glass systems with various Al2O3 contents. The mixed glass was then heat-treated at 600 °C and 800 °C for 2 h to form glass–ceramic samples. Phase formation, microstructure, mechanical properties and bioactivity were investigated. The phase formation analysis confirmed the presence of Li2Si2O5 in all the samples. The glass–ceramic sample with an Al2O3 content of 1 wt% showed rod-like Li2Si2O5 crystals that could contribute to the delay in crack propagation and demonstrated the highest mechanical properties. Surface treatment with hydrofluoric acid followed by a silane-coupling agent provided the highest micro-shear bond strength for all ceramic conditions, with no significant difference between ceramic samples. The biocompatibility tests of the material showed that Al2O3-added lithium disilicate glass–ceramic sample was bioactive, thus activating protein production and stimulating the alkaline phosphatase (ALP) activity of osteoblast-like cells.
Lithium disilicate glass ceramics with improved properties were prepared via a thermal treatment method by varying its composition. This study aims to investigate the influence of the concentration of Al2O3 additive oxides on the phase formation and mechanical properties of lithium disilicate glass ceramics prepared by conventional method. The Al2O3 concentration used are 3.0, 4.5, and 6.0 mol% for LCA1, LCA2, and LCA 3, respectively. As the content of Al2O3 increased the glass transition temperature (Tg), the crystallization temperature (Tc), phase formation, and mechanical properties of lithium disilicate glass ceramics varied considerably, demonstrating the substantial effect of Al2O3. After heat treatment at 600 °C and 800 °C for 1 h, the x-ray diffraction results showed that the major phase in all the glass-ceramic samples was Li2Si2O5 and the minor phases were CeO2, LiAlSi3O8, quartz, and Li2SiO3. For the lowest content of Al2O3, the highest flexural strength and Vickers hardness were obtained as 188.34 MPa and 776 HV, respectively. These results were attributed to the interlocking microstructure of rod-like Li2Si2O5 in the LCA1 sample.
24 October 2021 in International Journal of Applied Ceramic Technology
Kriab-mirror tesserae are a type of lead-coated mosaic mirror found in most archaeological sites and antiquities dating back to the 18th century in central Thailand. The need for restoration work has prompted the search for alternative mirrors with similar characteristics to the ancient ones. Prototypes of alternative lead-coated mirrors were successfully used to restore a variety of archaeological sites and artifacts, demonstrating their potential application in heritage conservation and restoration work. We investigated the selected ancient Kriab samples in terms of their composition in both glass and reflective coating layers, as well as the chemical and mechanical characterization of the selected alternative Kriab mirrors. We employed a standard lab-shear test, which proved difficult to evaluate due to failure not occurring between the glass-to-metal interfaces. However, a modified lab-shear specimen setup was used to elucidate the peel-off bonding behavior of the lead-to-glass interface. Additionally, we measured the L*, a*, and b* values in the CIE-Lab standard, which exhibited variations for each colored Kriab mirror. The %reflectance of the selected ancient and alternative Kriab mirrors was highly similar when lower than a high %reflectance of a standard silvering mirror. Thai professional conservators have embraced the use of alternative Kriab mirrors in restoration projects as a replacement for old Kriab mirrors, as they are more compatible in terms of color and avoid the excessive brightness of silvered colored mirrors. However, the weathering durability of the alternative mirrors was poor due to the leaching of alkaline and lead ions caused by hydrolytic attack on the poor chemical stability separated phase. Overall, our research provides valuable insights into the properties and qualities of both ancient and alternative Kriab mirrors, which will be useful in the further development of mirrors with more resembling properties or even more environmentally friendly Kriab mirrors and their potential applications in restoration work in Thailand and archaeological sites in Asia.