This study provides insights into the feasibility of a desiccant dehumidification-based Maisotsenko cycle evaporative cooling (M-DAC) system for greenhouse air-conditioning application. Conventional cooling techniques include direct evaporative cooling, refrigeration systems, and passive/active ventilation. which are commonly used in Pakistan; however, they are either not feasible due to their energy cost, or they cannot efficiently provide an optimum microclimate depending on the regions, the growing seasons, and the crop being cultivated. The M-DAC system was therefore proposed and evaluated as an alternative solution for air conditioning to achieve optimum levels of vapor pressure deficit (VPD) for greenhouse crop production. The objective of this study was to investigate the thermodynamic performance of the proposed system from the viewpoints of the temperature gradient, relative humidity level, VPD, and dehumidification gradient. Results showed that the standalone desiccant air-conditioning (DAC) system created maximum dehumidification gradient (i.e., 16.8 g/kg) and maximum temperature gradient (i.e., 8.4 °C) at 24.3 g/kg and 38.6 °C ambient air conditions, respectively. The DAC coupled with a heat exchanger (DAC+HX) created a temperature gradient nearly equal to ambient air conditions, which is not in the optimal range for greenhouse growing conditions. Analysis of the M-DAC system showed that a maximum air temperature gradient, i.e., 21.9 °C at 39.2 °C ambient air condition, can be achieved, and is considered optimal for most greenhouse crops. Results were validated with two microclimate models (OptDeg and Cft) by taking into account the optimality of VPD at different growth stages of tomato plants. This study suggests that the M-DAC system is a feasible method to be considered as an efficient solution for greenhouse air-conditioning under the climate conditions of Multan (Pakistan).
Precision planting is critical for improving crop establishment and productivity in smallholder farming systems in Pakistan, where manual seeding remains labour-intensive, imprecise, and inefficient. The limited availability of suitable small planters and the impracticality of larger precision seeders for fragmented holdings further constrain mechanization. This study addressed these limitations by redesigning and enhancing a vertical-plate, single-row precision planter through the integration of a straight seed delivery path and shutter mechanism and evaluating it alongside three other manually operated precision planters. Laboratory experiments quantified the seed physical properties, metering accuracy, calibration performance, and seed damage, while field trials assessed the spacing precision, plant population, labour demand, field efficiency, and operating costs across 1000 m2 test plots. The punch-wheel planter exhibited the best performance, achieving a spacing precision coefficient of 6.79%, a field efficiency of 88.2%, and the lowest operating cost (PKR 799 acre−1), while the remaining planters also met acceptable operational standards. In comparison with manual sowing (20–25 man-hours acre−1), precision planters reduced labour to 6–8 man-hours acre−1, saving PKR 7000–9000 acre−1. Enhanced spacing uniformity improved the stand establishment and yield potential. These low-cost precision planters reduce drudgery, particularly for women farmers, minimize soil disturbance, and contribute to the Sustainable Development Goals of the United Nations by promoting sustainable smallholder mechanization.
About Me
I am an Agricultural Engineer, working as researcher in the field of Agricultural Mechanization.
I am an Agricultural Engineer, working as researcher in the field of Agricultural Mechanization.