This paper presents a new contribution in the field of the optimization of the techniques of control of the wind systems and the improvement of the quality of energy produced in the grid. The Sliding Mode control technique gives quite interesting results, but its major drawback lies in the phenomenon of chattering (oscillations), which reduces the system's precision. We propose in this work a solution to cancel this chattering phenomenon by the implication of the adaptive Backstepping technique to control the powers of the double-fed asynchronous generator (DFIG) connected to the electrical network by two converters (network side and side machine) in the nominal part of the sliding mode model. This hybrid technique will correct errors of precision and stability and the performance of the wind system obtained in terms of efficiency, active and reactive power is significant. First, a review of the wind system was presented. Then, an exhaustive explanation of the Backstepping technique based on the Lyapunov stability and optimization method has been reported. Subsequently, a validation on the Matlab & Simulink environment was carried out to test the performance and robustness of the proposed model. The results obtained from this work, either by follow-up or robustness tests, show a significant performance improvement compared to other control techniques.

In recent years, regulating a wind energy conversion system (WECS) under fluctuating wind speed and enhancing the quality of the electricity provided to the grid has become a hard challenge for many academics. The current research provides a better control strategy to decrease the occurrence of chattering phenomena. Combined with the Maximum Power Point Tracking (MPPT) strategy and a pitch angle control, the control is possible to increase the performance and the efficiency of the Permanent Magnet Synchronous Generator (PMSG) based Wind Energy Conversion System. This study attempts initially to regulate the generator and the grid side converter to track the wind speed reference established by the MPPT algorithm. And secondly, to relieve the chattering problem associated with the conventional sliding mode control (CSMC), the proposed sliding mode control (PSMC) is based on a novel smooth continuous switching control. Besides, the suggested sliding mode control stability is confirmed using Lyapunov’s stability function. The complete system was evaluated in the MATLAB/Simulink (MathWorks, Natick, MA, USA) environment using a 2 MW PMSG’s power, under random fluctuations in the wind speed to show the suggested approach’s efficiency and robustness, which was then compared to the CSMC and other common approaches available in the literature. The simulation results reveal that the recommended sliding mode control approach delivers good speed, accuracy, stability, and output current’s ripple.

With the development of wind power generation in recent years, several studies have dealt with the active and reactive power control of wind power systems, along with the quality of energy produced and the connection to distribution networks. In this context, this research proposes a new contribution to the field. The major objective of this work is the development of a nonlinear adaptive backstepping control technique applied to a DFIG based wind system and an optimization technique that uses the rooted tree optimization (RTO) algorithm. The backstepping control strategy is based on the Lyapunov nonlinear technique to guarantee the stability of the system. It is applied to the two converters (i.e., machine and network sides) and subsequently improved with estimators to make the proposed system robust to parametric variation. The RTO technique is based on monitoring the behavior of the underlying foundation of trees in search of underground water in accordance with the level of underground control. The solution proposed for the control is validated using two methods: (1) a simulation on MATLAB/Simulink to test the continuation of the reference (real wind speed) and the robustness of the system and (2) a real-time implementation on a dSPACE-DS1104 board connected to an experimental bench in a laboratory. Simulation and experimental results highlight the validation of the proposed model with better performance compared with other control techniques, such as sliding mode control, direct power control, and field-oriented control.

There has always been a high expectation that wind generation systems would capture maximum power and integrate properly with the grid. Utilizing a wind generation system with increased management to meet the growing electricity demand is a clever way of accomplishing this. However, wind power generation systems require a sophisticated, unique, and dependable control mechanism in order to achieve stability and efficiency. To improve the operation of the wind energy conversion method, researchers are continually addressing the obstacles that presently exist. Therefore, it is necessary to know which control can improve the whole system’s performance and ensure its successful integration into the network, despite the variable conductions. This article examines wind turbine control system techniques and controller trends related to the permanent magnet synchronous generator. It presents an overview of the most popular control strategies that have been used to control the PMSG wind power conversion system. Among others, we mention nonlinear sliding mode, direct power, backstepping and predictive currents control. First, a description of each control is presented, followed by a simulation performed in the Matlab/Simulink environment to evaluate the performance of each control in terms of reference tracking, response time, stability and the quality of the signal delivered to the network under variable wind conditions. Finally, to get a clear idea of the effect of each control, this work was concluded with a comparative study of the four controls.

This new paper describes an experimental investigation of a proportional-integral (PI) controller that uses feedback control to regulate an energy system that uses multi-rotor wind energy systems. Pulse width modulation (PWM) is used by the proposed controller to control the power of the doubly-fed induction generator controlled by direct power control (DPC), which is intended to regulate and control the inverter. The proposed strategy differs from the traditional DPC strategy. The proposed control was studied in the case of variable wind speed, where the MATLAB and Dspace 1104 environment was used to implement this proposed feedback PI (FPI) controller, with a comparison with the proposed control technique and some existing works. The suggested FPI controller outperforms the traditional controller and certain other controllers in terms of lowering energy ripples, overshoot, steady-state error (SSE), response time, and the total harmonic distortion (THD) of supplied system currents, as demonstrated by experimental and simulation results. The THD value of current was reduced by 64.86% and 69.44% in the two proposed tests compared to the traditional DPC technique. Also, the value of ripples and overshoot of active power was reduced compared to the DPC method by 95.42% and 90.86%, respectively, in the case of step wind speeds. Moreover, ripples and SSE of reactive powers compared to the DPC technique were reduced by 37.51% and 84.13%, respectively. These high ratios indicate the high performance of the proposed DPC-FPI technique in enhancing the features of the system in contrast to the conventional DPC technique.