Water hyacinth is an aquatic weed species that grows rapidly. In particular, it causes negative impacts on the aquatic environment and ecological system. However, water hyacinth is rich in cellulose, which is a biodegradable material. This study isolated cellulose from the water hyacinth petiole. It was then used to fabricate composite hydrogels made with water hyacinth cellulose (C), alginate (A), and pectin (P) at different mass ratios. The selected water hyacinth cellulose-based hydrogel was incorporated with quercetin, and its properties were evaluated. The FTIR and XRD of extracted water hyacinth cellulose indicated specific characteristics of cellulose. The hydrogel which consisted of the water hyacinth cellulose alginate characterized pectin: pectin had a mass ratio of 2.5:0.5:0.5 (C_2.5A_0.5P_0.5), showed good puncture strength (2.16 ± 0.14 N/mm²), the highest swelling index (173.28 ± 4.94%), and gel content (39.35 ± 0.53%). The FTIR showed an interaction between water hyacinth cellulose and quercetin with hydrogen bonding. The C_2.5A_0.5P_0.5 hydrogel containing quercetin possessed 92.07 ± 5.77% of quercetin-loaded efficiency. It also exhibited good antibacterial activity against S. aureus and P. aeruginosa due to hydrogel properties, and no toxicity to human cells. This study indicated that water hyacinth cellulose-composited hydrogel is suitable for topical antibacterial applications.

Three-dimensional (3D) printing can be used to fabricate custom microneedle (MN) patches instead of the conventional method. In this work, 3D-printed MN patches were utilized to fabricate a MN mold, and the mold was used to prepare dissolving MNs for topical lidocaine HCl (L) delivery through the skin. Topical creams usually take 1–2 h to induce an anesthetic effect, so the delivery of lidocaine HCl from dissolving MNs can allow for a therapeutic effect to be reached faster than with a topical cream. The dissolving-MN-patch-incorporated lidocaine HCl was constructed from hydroxypropyl methylcellulose (HPMC; H) and polyvinyl pyrrolidone (PVP K90; P) using centrifugation. Additionally, the morphology, mechanical property, skin insertion, dissolving behavior, drug-loading content, drug release of MNs and the chemical interactions among the compositions were also examined. H5₁P₂-L, H50₁P₂-L, and H90₁P₂-L showed an acceptable needle appearance without bent tips or a broken structure, and they had a low % height change (80%). These three formulations exhibited a drug-loading content approaching 100%. Importantly, the composition-dependent dissolving abilities of MNs were revealed. Containing the lowest amount of HPMC in its formulation, H90₁P₂-L showed the fastest dissolving ability, which was related to the high amount of lidocaine HCl released through the skin. Moreover, the results of an FTIR analysis showed no chemical interactions among the two polymers and lidocaine HCl. As a result, HPMC/PVP K90 dissolving microneedles can be used to deliver lidocaine HCl through the skin, resulting in a faster onset of anesthetic action.

Composite bacterial cellulose (BC) based hydrogel with alginate (A) or pectin (P) or alginate and pectin was fabricated via a physical crosslinking technique using calcium chloride (CaCl₂) solution and incorporated with polyhexamethylene biguanide (PHMB) as an effective antimicrobial drug by immersion method. After that, the physicochemical properties of all hydrogel formulations were characterized. The result showed that the formulations with PHMB performed better physicochemical properties than the hydrogel without PHMB. Fourier transform infrared spectroscopy (FT-IR) showed the interaction between PHMB and the carboxylic group of alginate and pectin. BC/A-PHMB hydrogel performed suitable mechanical strength, fluid uptake ability, water retention property, drug content, high integrity value, and maximum swelling degree. Moreover, in vitro cell viability of BC/A-PHMB hydrogel revealed high biocompatibility with human keratinocyte cell line (HaCaT) and demonstrated prolong released of PHMB in Tris-HCl buffer pH 7.4, while rapid release in phosphate buffer saline pH 7.4. BC/A-PHMB hydrogel demonstrated good anti-bacterial activity against S. aureus and P. aeruginosa. In conclusion, BC/A-PHMB hydrogel could be a potential dual crosslinked ion-based hydrogel for wound dressing with anti-bacterial activity.

Dissolving microneedles are extensively applied in drug delivery systems to enhance penetration into the skin. In this study, dissolving microneedles fabricated from polyvinylpyrrolidone K90 (PVP-K90) and hydroxypropylmethyl cellulose (HPMC) E50 in different ratios were characterized. The selected formulations incorporated Oryza sativa L. extract complex and its characteristics, transfollicular penetration, and safety were observed. The microneedles, fabricated from PVP K90: HPMC E50 in a ratio of 25:5 (P25H5) and 20:10 (P20H10), revealed excellent morphological structure, proper mechanical strength, and excellent skin insertion. P25H5 microneedles exhibited faster dissolution than P20H10 microneedles. Microneedles containing Oryza sativa L. extract complex showed excellent morphological structure via scanning electron microscopy but decreased mechanical strength. P25H5-O, which exhibited an effective ability to enter skin, was selected for further investigation. This microneedle formulation had a high percentage of drug-loading content, enhanced skin penetration via the transfollicular route, and was safe for keratinocytes. As a result, the dissolving microneedle containing Oryza sativa L. extract complex can be used to enhance transfollicular delivery through the skin with safety.

This work presents an innovative application of the sugar templating method to fabricate highly porous floating tablets based on cellulose derivatives for gastroretentive drug delivery systems (GRDDS). Ethyl cellulose (EC) and hydroxypropyl methylcellulose (HPMC) were utilized to develop formulations that optimize porosity, buoyancy, and drug release. Among the tested formulations, E₁₀H₅/CPM, consisting of 10% w/w EC and 5% w/w HPMC loaded with chlorpheniramine maleate (CPM), exhibited the most favorable properties, including high porosity (94.4%), uniform pore distribution, immediate buoyancy, and over 24 h of floating time. E₁₀H₅/CPM tablets demonstrated superior drug release performance compared to an EC-only formulation (E₁₀/CPM), attributed to the presence of HPMC, which facilitated improved hydration and diffusion. The in vitro release study showed that E₁₀H₅/CPM achieved a cumulative release of 79.01% over 72 h, following a Fickian diffusion mechanism. However, a limitation was noted in drug loading, with E₁₀H₅/CPM incorporating 6.40 mg of CPM, compared to 8.72 mg in E₁₀/CPM. Future work should focus on enhancing drug load and further optimizing polymer composition to improve the release profile. Overall, this study underscores the potential of sugar templating in developing cost-effective, scalable floating tablet formulations for improved gastric retention and localized drug delivery.