Mathematical model is proposed that describes the process of pumping gas into a porous medium initially filled with methane and water. Non-ideal gas and non-isothermal effects during its filtration are taken into account. The hydrate formation process is assumed to be equilibrium. Methodology for solving the system of equations of the mathematical model is constructed. The methodology was tested, in the one-dimensional axisymmetric case the calculation results were compared with a self-similar solution for a perfect gas, which showed a good qualitative and quantitative agreement.
Deposits of natural gas hydrates are some of the most promising sources of hydrocarbons. According to studies, at the current level of natural gas consumption, the traditional reserves will last for about 50 years, and the gas hydrate deposits will last for at least 250 years. Therefore, interest in the study of gas hydrates is associated first of all with gas production from gas hydrate deposits. Additionally, gas hydrates are widely studied for solving practical problems, such as transportation and storage of natural gas, utilization of industrial gases and environmental and technological disasters associated with gas hydrates. When solving practical problems related to gas hydrates, in addition to laboratory and field studies, mathematical modeling is also widely used. This article presents the mathematical models of non-isothermal flow in a porous medium considering the decomposition of gas hydrate. The general forms of the mass conservation equations, Darcy’s law and the energy conservation equation are given. The article also presents derivations of the equations for taking into account the latent heat of phase transitions and non-isothermal filtration parameters for the energy conservation equation. This may be useful for researchers to better understand the construction of the model. For the parameters included in the basic equations, various dependencies are used in different works. In all the articles found, most often there was an emphasis on one or two of the parameters. The main feature of this article is summarizing various dependencies for a large number of parameters. Additionally, graphs of these dependencies are presented so that the reader can independently evaluate the differences between them. The most preferred dependencies for calculations are noted and explained.
9 November 2015 in Tyumen State University Herald Physical and Mathematical Modeling Oil Gas Energy
All of the most well-known numerical methods for solving the Stefan’s problem, as well as a new method developed by the author are considered for the purpose of choosing the most efficient of them from a perspective of accuracy and computational speed. A comparison is carried out on the results of solving the problem for the boundary motion of “ice-water” phase transition around the vertical well passing through the thickness of permafrost. The conclusions, which are distributed to other multidimensional and multi-front statements of the Stefan’s problem, are made. The mathematical model, the brief description of the considered numerical methods and the boundaries of their applicability are presented. The comparison shows the advantages and disadvantages of different methods. It is demonstrated that the use of the explicit scheme leads to a marked increase in computation time, the six-point symmetric scheme may have oscillating solution; therefore, the implicit scheme is the most preferred. It is concluded that the most efficient method for one-dimensional and one front Stefan’s problems is the method of catching the front in the grid node using the implicit scheme, and the most efficient method for multi-dimensional and multi-front Stefan’s problems is the enthalpy method using the implicit scheme, which has been developed by the author.