Denis Sergeyevich Belskikh

Dr. Denis Sergeyevich Belskikh

Laboratory of Multiphase Media, Tyumen Branch of the Khristianovich Institute of Theoretical and Applied Mechanics of SB RAS, Tyumen, Tyumenskaya Oblast’, Russia
+1
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 December 2022 in Mathematics
Verified
Journal Article
Open access
PDF file
Stanislav Leonidovich BorodinStanislav Leonidovich Borodin
Stanislav Leonidovich Borodin
Nail Gabsalyamovich MusakaevNail Gabsalyamovich Musakaev
Nail Gabsalyamovich Musakaev
DBDenis Sergeyevich Belskikh
Denis Sergeyevich Belskikh
Deposits of natural gas hydrates are some of the most promising sources of hydrocarbons. According to studies, at the current level of natural gas consumption, the traditional reserves will last for about 50 years, and the gas hydrate deposits will last for at least 250 years. Therefore, interest in the study of gas hydrates is associated first of all with gas production from gas hydrate deposits. Additionally, gas hydrates are widely studied for solving practical problems, such as transportation and storage of natural gas, utilization of industrial gases and environmental and technological disasters associated with gas hydrates. When solving practical problems related to gas hydrates, in addition to laboratory and field studies, mathematical modeling is also widely used. This article presents the mathematical models of non-isothermal flow in a porous medium considering the decomposition of gas hydrate. The general forms of the mass conservation equations, Darcy’s law and the energy conservation equation are given. The article also presents derivations of the equations for taking into account the latent heat of phase transitions and non-isothermal filtration parameters for the energy conservation equation. This may be useful for researchers to better understand the construction of the model. For the parameters included in the basic equations, various dependencies are used in different works. In all the articles found, most often there was an emphasis on one or two of the parameters. The main feature of this article is summarizing various dependencies for a large number of parameters. Additionally, graphs of these dependencies are presented so that the reader can independently evaluate the differences between them. The most preferred dependencies for calculations are noted and explained.

1 December 2018 in Vestnik Tomskogo Gosudarstvennogo Universiteta. Matematika i Mekhanika
Verified
Journal Article
Closed access
Nail Gabsalyamovich MusakaevNail Gabsalyamovich Musakaev
Nail Gabsalyamovich Musakaev
MKMarat K. Khasanov
Marat K. Khasanov
Stanislav Leonidovich BorodinStanislav Leonidovich Borodin
Stanislav Leonidovich Borodin
DBDenis Sergeyevich Belskikh
Denis Sergeyevich Belskikh

10 April 2020 in Journal of Computational Methods in Sciences and Engineering
Verified
Journal Article
Closed access
PDF file
Nail Gabsalyamovich MusakaevNail Gabsalyamovich Musakaev
Nail Gabsalyamovich Musakaev
Stanislav Leonidovich BorodinStanislav Leonidovich Borodin
Stanislav Leonidovich Borodin
DBDenis Sergeyevich Belskikh
Denis Sergeyevich Belskikh
The formulation problem of injecting a warm (with a temperature above the initial temperature of the reservoir) gas into a porous formation, which initially filled with methane and its hydrate, is given. A mathematical model of non-isothermal gas fil

17 December 2018 in Tyumen State University Herald Physical and Mathematical Modeling Oil Gas Energy
Verified
Journal Article
Closed access
Stanislav Leonidovich BorodinStanislav Leonidovich Borodin
Stanislav Leonidovich Borodin
DBDenis Sergeyevich Belskikh
Denis Sergeyevich Belskikh
In the next few decades due to a depletion of traditional gas deposits, a question of using alternative sources of natural gas, such as gas hydrates deposits, might arise. Besides, there is a problem of existing greenhouse effect, which is constantly aggravated by increasing carbon dioxide emissions into the atmosphere. At the same time, carbon dioxide can replace methane in gas hydrates and remain in its stable hydrate state in the reservoir. Therefore, available deposits of hydrates are not only potential sources of energy, but also allow a sequestration (“burial”) of carbon dioxide with simultaneous extraction of methane. Several “classical” approaches to extract gas from its hydrate are discussed in the article: depressurization method (pressure reduction), thermal impact (temperature increase), and inhibitors’ use. Laboratory and practical experience of those approaches is reviewed, and their advantages and disadvantages are briefly described. Next, the most promising exchange method for simultaneous sequestration of the greenhouse gas and the production of energy is studied. The paper includes the results of this method’s use in the laboratory and the only practical application currently. The advantage of using a mixture of nitrogen and carbon dioxide for the exchange method was demonstrated, which significantly increases methane extraction degree from its hydrates, which was tested on the first well using this method. Comparing to previous studies reviewing this subject, additional studies related to methane exchange method in hydrates over the last two years were studied. The exchange method is acknowledged the most effective since it ensures a successful extraction of methane from gas hydrate deposits and a “burial” of greenhouse carbon dioxide. In this case, the highest percentage of methane extraction is observed when a mixture of carbon dioxide and nitrogen is injected into the formation. An additional advantage is the exchange can be combined with depressurization and thermal impact. The most promising for research and further application is the combined method for obtaining energy and disposing of the resulting greenhouse carbon dioxide gas. First, a hot mixture of carbon dioxide and nitrogen from combustion of methane on a power plant is pumped into the reservoir through the first well. Then, decomposition/exchange of methane hydrates occurs in the formation. Methane and associated products of its decomposition/exchange are extracted through the second well by depressurization method, and then the methane is cleaned and fed to the power plant for further combustion.

29 June 2020 in Tyumen State University Herald Physical and Mathematical Modeling Oil Gas Energy
Verified
Journal Article
Closed access
Stanislav Leonidovich BorodinStanislav Leonidovich Borodin
Stanislav Leonidovich Borodin
DBDenis Sergeyevich Belskikh
Denis Sergeyevich Belskikh
Gas hydrates, which contain the largest amount of methane on our planet, are a promising source of natural gas after the depletion of traditional gas fields, the reserves of which are estimated to last about 50 years. Therefore, it is necessary to study the methods for extracting gas from gas hydrates in order to select the best of them and make reasoned technological and engineering decisions in the future. One of these methods is the replacement of methane in its hydrate with carbon dioxide. This work studies the construction of a mathematical model to observe this method. The following process is considered in this article: on one side of a porous reservoir, initially saturated with methane and its hydrate, carbon dioxide is injected; on the opposite side of this reservoir, methane and/or carbon dioxide are extracted. In this case, both the decomposition of methane hydrate and the formation of carbon dioxide hydrate can occur. This problem is stated in a one-dimensional linear formulation for the case of negative temperatures and gaseous carbon dioxide, which means that methane, carbon dioxide, ice, methane, and carbon dioxide hydrates may be present in the reservoir. A mathematical model is built based on the following: the laws of conservation of masses of methane, carbon dioxide, and ice; Darcy’s law for the gas phase motion; equation of state of real gas; energy equation taking into account thermal conductivity, convection, adiabatic cooling, the Joule — Thomson effect, and the release or absorption of latent heat of hydrate formation. The modelling assumes that phase transitions occur in an equilibrium mode and that methane can be completely replaced by carbon dioxide. The results of numerical experiments are presented.

1 January 2017 in Bulletin of the South Ural State University Series "Mathematics. Mechanics. Physics"
Verified
Journal Article
Open access
PDF file
TRTyumen Branch of Khristianovich Institute of Theoretical and Applied Mechanics SB RAS
Tyumen Branch of Khristianovich Institute of Theoretical and Applied Mechanics SB RAS
НМНаиль Габсалямович Мусакаев
Наиль Габсалямович Мусакаев
Stanislav Leonidovich BorodinStanislav Leonidovich Borodin
Stanislav Leonidovich Borodin
DBDenis Sergeyevich Belskikh
Denis Sergeyevich Belskikh
TUTyumen State University
Tyumen State University
ДБДенис Сергеевич Бельских
Денис Сергеевич Бельских
Математическая модель и алгоритм решения задачи неизотермической фильтрации газа в пласте с учетом разложения гидрата