Currently, cement-based bio-composite is a relevant concept for researchers in the building. Given their hydrophilic nature, plant fibers act as a retarder in the setting time of the cement. In addition, cement raw mortar thermal properties remained problematic. This manuscript aims to study the effect of fiber treatment to reduce the hydrophilic aspect of natural fibers while enhancing cementitious matrix thermal properties. The first part of this study focused on the structural and morphological aspects. Scanning electron microscopy (SEM) showed a tinier calcium layer around the (SF) treated with NaOH and Paraffin oil on the adhesion surface. The Fourier transform infrared spectroscopy (FTIR) test revealed a disparity in the peaks of the absorption strips of CaCO3 and Ca(OH)2. It reveals that the treatment slowed alkaline hydrolysis and mineralization of fiber cell walls in the interfacial transition zone (ITZ), thus promoting cement hydration. The second part includes a thermophysical study of the composite. Remarkable thermal conductivity decrease and heat capacity decrease have been recorded by inserting sisal fibers. The best thermal properties were obtained for treated sisal fiber immersed in paraffin oil composite. Considering that the bio-mortar with treated Sisal fiber can be promising material from an insulation point of view.
This study investigates the fact that reinforcing geopolymers with natural fibers provides a practical way to improve their strength and durability. Offering environmental benefits compared to Portland cement, their mechanical performance still presents challenges. The particularity of this study lies in the pretreatment of natural fibers to limit their degradation within the alkaline geopolymer matrix. It also explores the effect of their length and content on matrix geopolymer. XRD (X-ray diffraction) analysis confirmed the crystalline structure of the geopolymer gels, unaffected by fiber inclusion. SEM (Scanning Electron Microscopy) observations showed a decrease or even disappearance of mineralization in treated sisal and palm fibers within the matrix, along with some partial detachment of the fibers. Optimal compressive strength was achieved using metakaolin and GGBS (Ground Granulated Blast-furnace slag). Incorporating 4% short palm fibers enhanced flexural strength, while long sisal fibers led to a 30% increase in flexural strength compared to short fibers, representing a 10.7% overall improvement. However, current geopolymer systems still face challenges such as low flexural strength and brittleness, which this study overcomes by incorporating processed natural fibers as sustainable reinforcements with optimal content.
This study investigates the mechanical and microstructural behavior of sisal fiber-reinforced cementitious and geopolymer mortars using a Design of Experiments (DoE) approach. The objective is to evaluate the combined influence of fiber content and matrix type on mechanical performance and microstructural characterization. The results show that incorporating 4 wt.% sisal fibers affects the mechanical and microstructural properties of the investigated mortar systems. Although fiber incorporation reduces the compressive strength of cement-based mortars, reaching 28 MPa after 28 days, geopolymer composites achieve higher compressive strength (35 MPa) together with a marked improvement in flexural strength, reaching 16 MPa. This enhancement is attributed to efficient crack-bridging mechanisms and greater energy dissipation under loading. Microstructural characterization by scanning electron microscopy and porosity analysis indicates that the addition of fibers primarily modifies the fiber–matrix interface and increases porosity, while the overall matrix structure remains largely unaffected. The findings further suggest that appropriate fiber treatment mitigates interfacial degradation in alkaline environments. Overall, controlling fiber incorporation and matrix formulation is essential for balancing strength and ductility, highlighting the potential of sisal fiber-reinforced geopolymer composites as sustainable alternatives to conventional cement-based materials.
Currently, cement-based bio-composite is a relevant concept for researchers in the building. However, these researches highlighted some handicaps. Plant fibers are acting as a retarder in the setting time of the cement. In this study, Sisal fiber (SF) (4% by mass of cement) was subjected to different treatments to improve bio-composites hydration kinetics (KH) “tested by isotherm calorimetry”. The treatment slowed down both alkaline hydrolysis and mineralization of fiber cell walls by promoting the hydration of cement. This result was coherent with morphological properties. In fact, the images obtained by scanning electron microscopy (SEM) showed a tinier calcium layer around the (SF) treated with NaOH and Paraffin oil on the adhesion surface. The Fourier transform infrared spectroscopy (FTIR) test revealed a disparity in the peaks of the absorption strips of CaCO3 and Ca(OH)2 and thus cement hydration. In addition, the tests results showed a decrease in thermal conductivity (λ) and volumetric heat capacity (ρ.CV) after treatment of (SF). Resistance (RTh) and thermal diffusivity (α) slightly increased with treated fiber. Considering that, the bio-mortar with treated Sisal fiber can be promising material from an insulation point of view.