Bulbul Bayakhmetova

Mrs. Bulbul Bayakhmetova

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 July 2025 in Processes
Verified
Journal Article
Open access
PDF file
ASAlfira Sabitova
Alfira Sabitova
NMNurlan Mukhamediyarov
Nurlan Mukhamediyarov
Binur MussabayevaBinur Mussabayeva
Binur Mussabayeva
BRBauyrzhan Rakhadilov
Bauyrzhan Rakhadilov
NANurbol Aitkazin
Nurbol Aitkazin
BGBalzhan Gaisina
Balzhan Gaisina
The processing of metallurgical slags is an urgent task, as they contain residual amounts of precious and non-ferrous metals such as gold, silver, copper and zinc. The efficiency of extraction of these metals directly depends on the granulometric composition of the processed material, which determines the need for its detailed analysis. The purpose of this study is to analyze the effect of the granulometric composition of slags on the efficiency of extraction of non-ferrous metals using the flotation method. For this purpose, studies were carried out, including granulometric analysis, chemical composition analysis and flotation tests using Na2S, KAX and 3418A reagents. The analysis showed that the main part of the slag consisted of particles less than 3.36 mm, while the content of copper was 0.60%, zinc was 2.37%, gold was 0.1 g/t and silver was 7.2 g/t. Flotation experiments confirmed that the use of Na2S and 3418A increased the recoverability of copper and zinc, and reducing the particle size to d80 <10 microns increased the efficiency of copper extraction by 7%. Thus, the optimization of flotation processes and the control of granulometric composition make it possible to increase the efficiency of metallurgical waste processing, reduce losses of valuable metals and reduce the environmental burden.

30 September 2020 in Bulletin of the Karaganda University. "Chemistry" Series
Verified
Journal Article
Closed access
ASAlfira Sabitova
Alfira Sabitova
BBBulbul Bayakhmetova
Bulbul Bayakhmetova
Binur MussabayevaBinur Mussabayeva
Binur Mussabayeva
LOLazzyat Orazzhanova
Lazzyat Orazzhanova
KGK.G. Ganiyeva
K.G. Ganiyeva
The purpose of this article is to study the sorption of heavy metals by humic acids of light and dark chestnut soil. The objects of research are the samples of dark and light chestnut soils, selected from an ecologically clean area of East Kazakhstan. Humic acids (HA) were separated from the soil at different pH values. At the same time the yield of HA was 0.075% from dark chestnut soil at pH 1.0, and it was 0.017% from light chestnut at pH=7.0. Further, the dependence of the sorption degree on the medium acidity was established. It was found that zinc and cadmium are better sorbed in a strongly acidic medium (рН1.0; 84.14%), while lead is preferably sorbed at pH 6.0, and the degree of its sorption is higher (93.54%). It was established that metals have a mutual effect, suppressing or enhancing the sorption of each other in bi- and polyelement variants. It was shown that cadmium significantly suppresses lead sorption in neutral media. Zinc more often increases the sorption of both cadmium and lead by 3 times. It was concluded that the binding of heavy metal ions by the organic fraction of the soil occurs due to the complexation with humic acids.

30 September 2022 in Bulletin of the Karaganda University. "Chemistry" Series
Verified
Journal Article
Closed access
AUAstana International University
Astana International University
Binur MussabayevaBinur Mussabayeva
Binur Mussabayeva
ZKZhanar Kassymova
Zhanar Kassymova
SUShakarim University
Shakarim University
LOLazzyat Orazzhanova
Lazzyat Orazzhanova
BBBulbul Bayakhmetova
Bulbul Bayakhmetova
The interpolyelectrolyte complex of the composition [chitosan]:[alginate] = [1]:[4] was prepared by mixing a hydrochloric acid solution of cationic polyelectrolyte chitosan and an aqueous solution of anionic polyelectro-lyte sodium alginate. The complex of chitosan and sodium alginate biopolymers was first used as a soil structurizer. Due to low humus and light mechanical composition, the dark chestnut soil of the dry-steppe zone of the East Kazakhstan region is subjected to erosion. Introducing a polymer complex into the specified soil contributed to the improvement of wind resistance, an increase in humidity, and a decrease in water per-meability. The soil surface treated with a complex of biopolymers showed pronounced resistance to the action of planar and trickle water erosion due to aggregation of particles with a diameter of < 0.01 mm. The fraction of soil particles obtained by mechanical destruction of structured aggregates with a diameter of 3-1 mm has a well-expressed ability to self-aggregate during the humidification - drying process. The results of the vegeta-tion and field experience in tillage with an interpolyelectrolyte complex showed a positive effect of the com-plex on the growth and development of radish of the Rubin variety and, as a result, an increase in radish yield by 2 times was achieved. The obtained results indicate the effectiveness of the structuring action of the chi-tosan-alginate complex for poorly structured soils.

15 May 2025 in Electrochem
Verified
Journal Article
Open access
PDF file
AAAzhar Abdrakhmanova
Azhar Abdrakhmanova
ASAlfira Sabitova
Alfira Sabitova
Binur MussabayevaBinur Mussabayeva
Binur Mussabayeva
BBBulbul Bayakhmetova
Bulbul Bayakhmetova
ZSZhanna Sharipkhan
Zhanna Sharipkhan
EYElmira Yermoldina
Elmira Yermoldina
Anode-free lithium-ion batteries offer a volumetric energy density approximately 60% higher than that of conventional lithium-ion cells. Despite this advantage, they often experience rapid capacity degradation and a limited cycle life. Optimizing electrolyte formulations—particularly through the use of specific additives, solvents, and lithium salts—is essential to improving these systems. This study explores electrolytes composed of fluorinated and carbonate-based solvents applied in anode-free lithium-ion cells featuring copper as the anode substrate and Li1.05Ni0.33Mn0.33Co0.33O2 as the cathode. In the present work, the ionic conductivity of electrolytes was studied by impedance spectroscopy, and the electrochemical parameters of anode-free lithium-ion cells were compared using these electrolyte solutions: lithium difluoro(oxalato)borat (LIDFOB) salts were used in a mixture of solvents such as fluoroethylene carbonate (FEC) and dimethoxyethane (DME) in a ratio of 3:7 and in a mixture of propylene carbonate (PC) and dimethoxyethane in a ratio of 3:7. Enhanced performance was observed upon the substitution of conventional carbonates with fluorinated co-solvents. The findings suggest that LiDFOB is a thermostable salt, and its high conductivity contributes to the formation and stabilization of the interface of solid electrolytes. The results indicate that at low temperature conditions, a double salt should be used for lithium current sources, for example, 0.4 M LiDFOB and 0.6 M LiBF4, as well as electrolyte additives such as fluoroethylene carbonate and lithium nitrate.

11 February 2023 in Bulletin of Shakarim University. Technical Sciences
Verified
Journal Article
Open access
PDF file
BGB. S. Gaisina
B. S. Gaisina
LOLazzyat Orazzhanova
Lazzyat Orazzhanova
ASAlfira Sabitova
Alfira Sabitova
BBBulbul Bayakhmetova
Bulbul Bayakhmetova
ZSZhanna Sharipkhan
Zhanna Sharipkhan
Biocompatible cryogels are substances with a very high prospect for obtaining functional materials. The macroporous structure is of great importance for the use of cryogels as important materials in medicine, catalysis and some areas of biotechnology. In this review, the authors focused on methods for producing cryogels based on biopolymers, interpolyelectrolyte complexes of biopolymers and composite cryogels based on them. First, a brief theoretical information on the properties of cryogels and methods for producing cryogels based on biopolymers will be considered. The second part of the review contains the latest achievements in the production of cryogel based on biopolymer complexes and composite cryogels. The features of cryogenic synthesis and factors affecting the required final properties of cryogenic materials are considered. In the third part of the review, the fields of application of biocompatible cryogels in oil and gas fields of the type under consideration in biotechnology, catalysis and medicine are studied. In biotechnology, cryogenic materials are used to immobilize molecules and biological cells, as a basis for cell growth and as chromatographic materials for cell separation. In catalysis, cryogenic materials are used as a matrix for the immobilization of metal nanoparticles and enzymes. Biocompatible cryogels and composites based on them are widely used in medicine to restore bone and cartilage tissue, as well as for the proper transfer of drugs, ensuring the release of drugs in the body. The use of cryotropic polymer compositions with controlled hydrophobic properties as a reinforcing layer for creating hydro barrier screens in oil and gas fields is promising.

29 July 2026 in Bulletin of Shakarim University. Technical Sciences
Verified
Journal Article
Open access
PDF file
ASAlfira Sabitova
Alfira Sabitova
ZSZhanna Sharipkhan
Zhanna Sharipkhan
BBBulbul Bayakhmetova
Bulbul Bayakhmetova
AKA. K. Kabylkakov
A. K. Kabylkakov
NNN. N. Nurgaliyev
N. N. Nurgaliyev
ННН. Н. Нургалиев
Н. Н. Нургалиев
The study examines modern approaches to oil regeneration, including physical, chemical, and sorption methods, and substantiates the choice of adsorption purification as an environmentally safe and technologically simple alternative. An effective method for the purification and utilization of used motor oils using natural and modified bentonite sorbents has been developed. The research objects included used KIXX 10W-40 motor oil, P1T1A and «13 Horizon» bentonites, as well as their modified forms obtained through acid and peroxide activation methods. Experimental studies were carried out using a vacuum oil purification unit and sorption filtration techniques. The purification efficiency was evaluated using FTIR spectroscopy, thermogravimetric analysis (TGA), and ICP-MS methods. The results demonstrated a significant reduction in water content, oxidation products, sulfur-containing compounds, and metal impurities. The highest efficiency was achieved with modified P1T1A bentonite, ensuring maximum contaminant removal. It was established that modification increases specific surface area and sorption capacity, enhancing adsorption processes. The proposed method is simple, cost-effective, scalable, and does not generate secondary toxic waste, making it suitable for industrial application while reducing environmental impact.