This letter reports diode pumping for dye lasers. We offer a pulsed dye laser with an astigmatism-compensated three-mirror cavity and side pumping by blue laser diodes with 200 ns pulse duration. Eight dyes were tested. Four dyes provided a slope efficiency of more than 10% and the highest slope efficiency (18%) was obtained for laser dye Coumarin 540A in benzyl alcohol.
Study of a low-coherence dye laser is reported. A cuvette with a 2 mm gap containing a dense mixture (slurry) of LiF crystal granules (70–140 μm) and an immersion liquid with a dye dissolved in it was installed in a double flat mirror cavity as an active element and simultaneously as a diffuser of radiation. The parallel light beam experiences losses in such a cuvette due to refraction at a set of interfaces between solid particles and a liquid in which different parts of the beam are randomly deflected at small angles. Measurements of the loss coefficients, angles of rays’ deflection in the cuvette–diffuser were carried out. When this cuvette was pumped by 25 ns pulses of the 2nd harmonic of a Nd:YAG laser, 20 ns pulses of radiation in the region of 550–650 nm with energy ≈1 mJ at a beam divergence 5–80 mrad, and a degree of spatial coherence γ ≲ 0.1 were obtained in slurry with PM567, Rh101 or DCM dyes. The features of spectra and spatial-angular characteristics of these slurry lasers are discussed, tuning of the spatial coherence of radiation is demonstrated. Possible applications of a dye laser with an intracavity diffuser as a source of low-coherence radiation are considered.
Dye lasing in a dense slurry-like mixture, similar to the optical medium of the Christiansen filter, is first reported. A cuvette with lithium fluoride (LiF) crystal particles and an immersion liquid containing pyrromethene 567 dye was placed in a two plane mirror resonator and pumped by pulses of the second harmonic of the neodymium-doped yttrium aluminum garnet (Nd:YAG) laser. Twenty nanosecond pulses at 545–570 nm wavelengths with energies up to 0.6 mJ were obtained at the output of this slurry laser. The central part of the laser beam with a divergence of 6 mrad was usually accompanied by a ring structure of scattered radiation. The conditions of the generation development and formation of the output beam profile in a slurry laser as well as its possible applications are discussed.