Purpose: A growing response in the development of hybrid composites to conquer the deficiency of neat composites has provoked doing this work. Thermoplastic Polycarbonate material offers better impact toughness with low structural weight. There is a little/no information available over the selected sandwich hybrid composite prepared from woven E-Glass and polycarbonate sheet. The purpose of this paper is to understand the response of the novel hybrid structure under tensile, flexural, interlaminar shear and impact loading conditions. Design/methodology/approach: The hand-layup technique is used for fabricating the hybrid composites in the laminate configuration. The hybrid composites are prepared with a total fiber content of 70 percent weight fractions. The effect of the percentage of reinforcement on mechanical properties is evaluated experimentally as per American society for testing materials standard test methods. The damaged mechanisms of failed samples and fractured surfaces are well analyzed using vision measuring system and scanning electron microscopy. Findings: A decline in densities of hybrid composites up to 22.5 percent is noticed with reference to neat composite. An increase in impact toughness up to 40.73 percent is marked for hybrid laminates owing to the ductile nature of PC. Delamination is identified to be the major mode of failure apart from fiber fracture/pull-out, matrix cracking in all the static loading conditions. Originality/value: The response of novel hybrid composite reported has been explored for the first time in this paper. The outcome of experimental work revealed that hybridization offered lightweight structures with improved transverse impact toughness as compared to conventional composite.
2 January 2020 in International Journal of Polymer Analysis and Characterization
The paper delineates the effects of reinforcement types and their amalgamation on static and dynamic properties of hybrid composite laminates. Hybrid composites are prepared by E-Glass, Twaron fabrics and polycarbonate sheets reinforced in epoxy matrix. Dynamic impact resistance and damage mechanisms are studied using load-deformation-energy-time graphs. The addition of polycarbonate sheet has increased strain to failure and toughness of hybrid composites than its pure counterparts. The tensile, interlaminar, flexural properties of hybrid composites provided a compatible performance and can be incorporated for structural and defense applications. Hybridization has provided a reduction in density about 10–14% with substantial enhancement of impact damage tolerance.
Due to an increase in the need for improvement of impact resistance of conventional composites, hybrid composites are evolved. This research article presents the dynamic characteristics of a novel two-component hybrid composite plate under transverse impact loading. The multilayered hybrid composite laminate is fabricated using woven fibreglass fabric as skin material and thermoplastic polycarbonate sheet as the core. High strength, medium viscous epoxy matrix is used for bonding the skin and core materials. The hand layup followed by a compression molding technique is used for producing the laminate. The test samples are impacted with a minimum energy of 45 J to a maximum energy of 60 J to obtain rebound, penetration and perforation phenomenon at room temperature. Load–energy–displacement–time curves are plotted to understand the transient behaviour of the composite plates. Results are compared with the pure counterparts available in the literature in terms of impact resistance. It is inferred that the novel multilayered laminate being in lightweight about 19.17% as compared to conventional laminate presented by Evci and Gülgeç (J Compos Mater 48:3215–3236). Further, the novel composite has provided less damage area with 16.66% of enhanced impact resistance in terms of energy required for complete perforation. The investigation revealed the possibility of replacing conventional materials with hybrid laminates in structural, defense and automotive applications, where impact resistance and light weight has much importance.
2 August 2020 in Iranian Journal of Science and Technology, Transactions of Mechanical Engineering