9 February 2018 in Mechanics of Advanced Materials and Structures
A distinct perspective of using the hybrid composite patches with varying stiffness for repair of a cracked Al 6061-T6 plate and its influence on repair performance is presented. The hybrid composite patches of carbon and glass fibers are considered. The volume fraction of constituents is selected in accordance with the required stiffness ratio. Numerical analysis is performed to evaluate the J-Integral, reduction factor of SIF and interfacial stresses. Patch hybridization has restricted the J-Integral and shown positive impact on interfacial stresses at the edges. The obtained results indicate that the hybrid composite patches have ensured alternative and effective repair solution.
18 June 2019 in The Journal of Adhesion
This article presents a distinct perspective of structural repair by bonding the hybrid composite patch. A novel hybrid composite patch is prepared from the carbon and glass fibers to repair the cracked panel. Different volume fractions of constituents are maintained to prepare the composite patch with varying stiffness. The elastic constant of the composite patch is derived by applying the rule of hybrid mixture and modified Halpin Tsai equation. The stress intensity factor in the panel and interfacial stresses in the adhesive layer are evaluated to assess repair efficiency and repair durability. Effects of the elastic modulus of the adhesive on the performance of composite patch repair are demonstrated. The load carrying capacity and failure strength are examined for variation in patch stiffness. The disbonded surface morphology is investigated through scanning electron microscopy after failure. The results reveal that the hybrid composite patch provided sufficient reinforcement to reduce the stress intensity and interfacial stresses. Patch hybridization has offered a pragmatic solution and proposed as an alternative patch material to repair the cracked structure.
1 January 2021 in Materials Today: Proceedings
7 August 2019 in International Journal of Structural Integrity
Purpose: A growing response in the development of hybrid composites to conquer the deficiency of neat composites has provoked doing this work. Thermoplastic Polycarbonate material offers better impact toughness with low structural weight. There is a little/no information available over the selected sandwich hybrid composite prepared from woven E-Glass and polycarbonate sheet. The purpose of this paper is to understand the response of the novel hybrid structure under tensile, flexural, interlaminar shear and impact loading conditions. Design/methodology/approach: The hand-layup technique is used for fabricating the hybrid composites in the laminate configuration. The hybrid composites are prepared with a total fiber content of 70 percent weight fractions. The effect of the percentage of reinforcement on mechanical properties is evaluated experimentally as per American society for testing materials standard test methods. The damaged mechanisms of failed samples and fractured surfaces are well analyzed using vision measuring system and scanning electron microscopy. Findings: A decline in densities of hybrid composites up to 22.5 percent is noticed with reference to neat composite. An increase in impact toughness up to 40.73 percent is marked for hybrid laminates owing to the ductile nature of PC. Delamination is identified to be the major mode of failure apart from fiber fracture/pull-out, matrix cracking in all the static loading conditions. Originality/value: The response of novel hybrid composite reported has been explored for the first time in this paper. The outcome of experimental work revealed that hybridization offered lightweight structures with improved transverse impact toughness as compared to conventional composite.
1 January 2018 in Materials Today: Proceedings
25 February 2020 in Multidiscipline Modeling in Materials and Structures
Purpose: In this article, a novel hybrid composite patch consisting of unidirectional carbon fiber and glass fiber is considered for repair of the aircraft structure. The purpose of this paper is to assess the performance of hybrid composite patch repair of cracked structure and propose an optimized solution to a designer for selection of the appropriate level of a parameter to ensure effective repair solution.Design/methodology/approach: Elastic properties of the hybrid composites are estimated by micromechanical modeling. Performance of hybrid composite patch repair is evaluated by numerical analysis of stress intensity factor (SIF), shear stress, and peel stress. Design of experiment is used to determine responses for a different combination of design parameters. The second-order mathematical model is suggested for SIF and peel stress. Adequacy of the model is checked by ANOVA and used as a fitness function. Multiobjective optimization is carried out with a genetic algorithm to arrive at the optimal solution.Findings: The hybrid composite patch has maintained equilibrium between the SIF reduction and rise of the peel stress. The repair efficiency and repair durability can be ensured by selection of an optimum value of volume fraction of glass fiber, applied stress, and adhesive thickness.Originality/value: The composite patch with varying stiffness is realized by hybridization with different volume fraction of fibers. Analysis and identification of optimum parameter to reduce the SIF and peel stress for hybrid composite patch repair are presented in this article.