Drying is one of the widely used methods of grain, fruit, and vegetable preservation. The important aim of drying is to reduce the moisture content and thereby increase the lifetime of products by limiting enzymatic and oxidative degradation. In addition, by reducing the amount of water, drying reduces the crop losses, improves the quality of dried products, and facilitates its transportation, handling, and storage requirements. Drying is a process comprising simultaneous heat and mass transfer within the material, and between the surface of the material and the surrounding media. Many models have been used to describe the drying process for different agricultural products. These models are used to estimate drying time of several products under different drying conditions, and how to increase the drying process efficiency and also to generalize drying curves, for the design and operation of dryers. Several investigators have proposed numerous mathematical models for thin-layer drying of many agricultural products. This study gives a comprehensive review of more than 100 different semitheoretical and empirical thin-layer drying models used in agricultural products and evaluates the statistical criteria for the determination of appropriate model.
15 July 2013 in Journal of Food Processing and Preservation
The effects of drying temperature on the drying time, color and thin-layer drying model were investigated. The moisture ratios changes during the drying time were compared by 38 different mathematical models and evaluated by different statistical criteria such as coefficient of determination (R2), reduced chi-square (χ2), root mean square error and mean relative percentage error (P). According to the results, drying time was between 18 and 38 min at drying temperatures of 60–80C. The lightness and yellowness of the dried mint leaves were significantly increased when compared with fresh samples. The high drying temperature yielded in darker, less green and more yellow mint leaves. When the 38 models compared according to the statistical values, the rational function model (model-32) for drying temperatures of 60 and 70C and Modified Henderson Pabis-II model (model-5) were superior to the others. Practical Application Mint essential oil is extracted either from freshly harvested mint leaves or from semi dried or dried leaves through distillation process for industrial use. Therefore, mint drying by using infrared provides many advantages.
Quantifying spatial and temporal variations in optimal tilt angle of a solar collector relative to a horizontal position assists in maximizing its performance for energy collection depending on changes in time and space. In this study, optimal tilt angles were quantified for solar collectors based on the monthly global and diffuse solar radiation on a horizontal surface across Turkey. The dataset of monthly average daily global solar radiation was obtained from 158 places, and monthly diffuse radiation data were estimated using an empirical model in the related literature. Our results showed that high tilt angles during the autumn (September to November) and winter (December to February) and low tilt angles during the summer (March to August) enabled the solar collector surface to absorb the maximum amount of solar radiation. Monthly optimum tilt angles were estimated devising a sinusoidal function of latitude and day of the year, and their validation resulted in a high R2 value of 98.8%, with root mean square error (RMSE) of 2.06o.
In this study, solar water heater was investigated using meteorological and geographical data of 129 sites over Turkey. Three different collector types were compared in terms of absorber material (copper, galvanized sheet and selective absorber). Energy requirement for water heating, collector performances, and economical indicators were calculated with formulations using observed data. Results showed that selective absorbers were most appropriate in terms of coverage rate of energy requirement for water-heating all over Turkey. The prices of selective, copper and galvanized absorber type’s heating systems in Turkey were 740.49, 615.69 and 490.89 USD, respectively. While payback periods (PBPs) of the galvanized absorber were lower, net present values (NPVs) of the selective absorber were higher than the rest. Copper absorber type collectors did not appear to be appropriate based on economical indicators.
5 December 2013 in International Journal of Electrical Power & Energy Systems
Though one of the most significant driving forces behind ecological processessuch as biogeochemical cycles and energy flows, solar radiation data are limited or non-existent by conventional ground-based measurements, and thus, often estimated from othermeteorological data through (geo)statistical models. In this study, spatial and temporalpatterns of monthly average daily solar radiation on a horizontal surface at the ground levelwere quantified using 130 climate stations for the entire Turkey and its conventionally-accepted seven geographical regions through multiple linear regression (MLR) models as afunction of latitude, longitude, altitude, aspect, distance to sea; minimum, maximum andmean air temperature and relative humidity, soil temperature, cloudiness, precipitation, panevapotranspiration, day length, maximum possible sunshine duration, monthly average dailyextraterrestrial solar radiation, and time (month), and universal kriging method. Theresulting 20 regional best-fit MLR models (three MLR models for each region) based onparameterization datasets had R2adj values of 91.5% for the Central Anatolia region to 98.0%for the Southeast Anatolia region. Validation of the best-fit MLR models for each region led to R2 values of 87.7% for the Mediterranean region to 98.5% for the Southeast Anatoliaregion. The best-fit anisotropic semi-variogram models for universal kriging as a result ofone-leave-out cross-validation gave rise to R2 values of 10.9% in July to 52.4% inNovember. Surface maps of monthly average daily solar radiation were generated overTurkey, with a grid resolution of 500 m x 500 m.