Nuri Caglayan

Dr. Nuri Caglayan

Agricultural Machinery and Technology Engineering, Akdeniz University, Antalya, Turkey (Türkiye)
orcid
Akdeniz University

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 June 2023 in Heliyon
Verified
Journal Article
Open access
H. Kursat CELIKH. Kursat CELIK
H. Kursat CELIK
SKSimay Koc
Simay Koc
AKAlper Kustarci
Alper Kustarci
Nuri CaglayanNuri Caglayan
Nuri Caglayan
ARAllan E.W. Rennie
Allan E.W. Rennie
Additive manufacturing (AM), also known as 3D printing, has the potential to transform the industry. While there have been advancements in using AM for dental restorations, there is still a need for further research to develop functional biomedical and dental materials. It’s crucial to understand the current status of AM technology and research trends to advance dental research in this field. The aim of this study is to reveal the current status of international scientific publications in the field of dental research related to AM technologies. In this study, a systematic scoping review was conducted using appropriate keywords within the scope of international scientific publishing databases (PubMed and Web of Science). The review included related clinical and laboratory research, including both human and animal studies, case reports, review articles, and questionnaire studies. A total of 187 research studies were evaluated for quantitative synthesis in this review. The findings highlighted a rising trend in research numbers over the years (From 2012 to 2022). The most publications were produced in 2020 and 2021, with annual percentage increases of 25.7% and 26.2%, respectively. The majority of AM-related publications in dentistry research originate from Korea. The pioneer dental sub-fields with the ost publications in its category are prosthodontics and implantology, respectively. The final review result clearly stated an expectation for the future that the research in dentistry would concentrate on AM technologies in order to increase the new product and process development in dental materials, tools, implants and new generation modelling strategy related to AM. The results of this work can be used as indicators of trends related to AM research in dentistry and/or as prospects for future publication expectations in this field.

5 December 2013 in International Journal of Electrical Power & Energy Systems
Verified
Journal Article
Closed access
Nuri CaglayanNuri Caglayan
Nuri Caglayan
CECan ERTEKİN
Can ERTEKİN
FEFatih Evrendilek
Fatih Evrendilek

11 October 2023 in Energies
Verified
Journal Article
Open access
PDF file
Nuri CaglayanNuri Caglayan
Nuri Caglayan
This study covers the technical and economic analysis of a grid-connected rooftop 216 kWp photovoltaic (PV) system to meet the average annual energy demand of 45,327 kWh of a dairy farm. According to the results of the analysis, an average of 326,819 kWh/year is received at the output of the panel arrays, while 294,838 kWh/year is supplied to the grid. The amount of energy to be received from the grid was found to be 25,013 kWh/year, and the performance ratio of the system was 0.808. The net present value (NPV) of the system was calculated as $36,463.39, and the levelized cost of electricity (LCOE) was calculated as 0.065 $/kWh. Considering that the annual electricity generation amount of the rooftop PV system evaluated within the scope of the study is 315,152 kWh, it is estimated that 127.419 tCO2 per year of emission release will be prevented annually with the installation of the system.

18 July 2011 in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
Verified
Journal Article
Closed access
OYO. Yaldiz
O. Yaldiz
SSSalih SÖZER
Salih SÖZER
Nuri CaglayanNuri Caglayan
Nuri Caglayan
CECan ERTEKİN
Can ERTEKİN
DKDevrim Kaya
Devrim Kaya
This article presents laboratory scale studies on the anaerobic digestion of plant wastes using a continuously flow type vertical cylindrical biogas plant. In the first experiment, plant wastes and chicken manure mixture at a dry matter content of 12%, retention time of 30 days, and fermentation temperature of 35°C were examined (Exp. 1). In the second experiment, fermentation material was grass and grass silage, covered marketplace wastes, rumen waste, chicken manure, and cattle manure. The experiments were conducted at a dry matter content of 9%, retention time of 47 days, and fermentation temperature of 35°C (Exp. 2). According to the results, biogas production was 1,055.7 l per day in Exp. 1 and 721.4 l per day in Exp. 2. The raw material specific biogas production was 0.310 l per g of organic dry matter per day in Exp. 1 and 0.443 l per g of organic dry matter per day in Exp. 2. The reactor specific biogas production was 1.05 l per l per day in Exp. 1 and 0.72 l per l per day in Exp. 2. Reactor specific methane production was 0.425 l per l per day in Exp. 1 and 0.381 l per l per day in Exp. 2. Raw material specific methane production was 0.125 l per g of organic dry matter per day in Exp. 1 and 0.234 l per g of organic dry matter per day in Exp. 2. The material pH value was 5.59 and 6.15 for inlet and 7.97 and 8.19 for outlet for Exp. 1 and Exp. 2, respectively. The methane content ranged between 40.3 and 52.9%.

16 October 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
H. Kursat CELIKH. Kursat CELIK
H. Kursat CELIK
IAIbrahim Akinci
Ibrahim Akinci
Nuri CaglayanNuri Caglayan
Nuri Caglayan
ARAllan Rennie
Allan Rennie
A rotary drum mower is a tractor-mounted harvester used for harvesting green fodder plants in agricultural fields. During transportation, it experiences significant dynamic road reaction forces that can cause deformation and functional failures. This study focuses on analysing the deformation behaviour of the machine during transportation to test the machine’s failure condition. To conduct the strength analysis, a total work cycle scenario reflecting actual load conditions and design challenges was created. Experimental strain-gauge-based stress analysis and advanced computer-aided engineering (CAE) simulation methods were employed. The study successfully conducted experimental stress analysis, 3D solid modelling, and validated finite element analysis (FEA). A comparison between experimental and simulation results showed an average relative difference of 24.25% with a maximum absolute difference of approximately 5 MPa. No functional failure issues were observed during physical experiments. The study also revealed that the mean dynamic loading value, when compared to the static linkage position, was calculated as 3.65 ± 0.40. Overall, this research provides a valuable approach for future studies on complex stress and deformation evaluations of agricultural machinery and equipment.

22 September 2016 in Notulae Scientia Biologicae
Verified
Journal Article
Open access
PDF file
EUEsra Ucar
Esra Ucar
Nuri CaglayanNuri Caglayan
Nuri Caglayan
KTKenan Turgut
Kenan Turgut
In this study, it was investigated the growth of stevia (Stevia rebaudiana Bertoni) under various wavelengths of LED lamp (Light Emitting Diodes), which can emit daylight (cool white; 400–700 nm), red (620–630 nm) and blue (465–485 nm) wavelengths of the light in the electromagnetic spectrum. In all applications, quantity of PAR (photosynthetically active radiation) was adjusted as 150 µmol.m-2 s-1. Study had maintained in plant breeding cabin 16 hours light and 8 hours dark environment. Results demonstrated that while the highest plant height was determined in the “30% blue light+ 70% red light” application, the highest stem length was found in the “50% blue light + 50% red light” application. In addition, the number of the stems reached the highest value in the “70% blue light + 30% red light” application. Consequently, a correlation was observed between negative “a” value and the amount of chlorophyll. Because of the hereby obtained results, comparing to other applications, the “50% blue light + 50% red light” was found as the best light application to obtain optimum yield values of stevia.