Environmental evaluation of the waste treatment processes for the area of Greater Porto (Portugal) is presented for the year 2015. The raw data for the energy recovery plant (ERP) provided by the waste management entity were modelled into nine environmental impact categories, resorting to a life cycle assessment dedicated software (GaBi) for the treatment of 1 tonne of residues. Also, a sensitivity analysis was conducted for five scenarios in order to verify the assessment quality. Results were compared to two European average situations (typical incineration plant and sanitary landfill with no waste pre-treatment), which showed that these facilities perform better or at the same level as the average European situation, mostly due to the high efficiency observed at the ERP and to the electricity production in the incineration process. A detailed analysis concluded that these helped to mitigate the environmental impacts caused by some of the processes involved in the waste-to-energy technology (landfill showing the harder impacts), by saving material resources as well as avoiding emissions to fresh water and air. The overall performance of the energy recovery plant was relevant, 1 tonne of waste saving up to 1.3 million kg of resources and materials. Regarding the environmental indicators, enhanced results were achieved especially for the global warming potential (−171 kgCO₂-eq.), eutrophication potential (−39 × 10⁻³ kgPO₄-eq.) and terrestrial ecotoxicity potential (−59 × 10⁻³ kg_DCB-eq.) categories. This work was the first to characterize this Portuguese incineration plant according to the used methodology, supporting the necessary follow-up required by legal frameworks proposed by European Union (EU), once this facility serves a wide populational zone and therefore is representative of the current waste management tendency in the country. LCA (life cycle assessment) was confirmed as a suitable and reliable approach to evaluate the environmental impacts of the waste management scenarios, acting as a functional tool that helps decision-makers to proceed accordingly.

Plasma gasification is a thermal treatment successfully applied to waste streams, especially for solid residues. It sets an upgrade to more common waste-to-energy (WtE) techniques as incineration or gasification, granting lower levels of pollutant emissions, less landfilled materials and higher conversion efficiencies and producer gas quality. A life cycle assessment (LCA) of plasma gasification for one ton of a defined stream of solid waste is presented and compared to the hypothetical outcomes of incineration, highlighting the need to implement such sustainable techniques rather than more polluting ones. CML 2001 methodology was applied, enabling the evaluation of eleven impact categories, all of them depicting avoided burdens for the environment. Enhanced efficiency and cleanliness were seen due to the plasma step and to the replacement of part of the electrical grid mix by the produced electricity. Plasma gasification presented an overall better performance than incineration, portraying savings in energy and material resources as well as lower emissions to freshwater. Additionally, lower amounts of air contaminants were seen as well as almost triple of the produced electricity.