Herein, this work aims to fabricate well-ordered nanonetwork epoxy resin modified with poly(butyl acrylate)-b-poly(methyl methacrylate) (PBA-b-PMMA) block copolymer (BCP) for enhanced energy dissipation using a self-assembled diblock copolymer of polystyrene-b-poly(dimethylsiloxane) (PS-b-PDMS) with gyroid and diamond structures as templates. A systematic study of mechanical properties using nanoindentation of epoxy resin with gyroid- and diamond-structures after modification revealed significant enhancement in energy dissipation, with the values of 0.36 ± 0.02 nJ (gyroid) and 0.43 ± 0.03 nJ (diamond), respectively, when compared to intrinsic epoxy resin (approximately 0.02 ± 0.002 nJ) with brittle characteristics. This enhanced property is attributed to the synergic effect of the deliberate structure with well-ordered nanonetwork texture and the toughening of BCP-based modifiers at the molecular level. In addition to the deliberate structural effect from the nanonetwork texture, the BCP modifier composed of epoxy-philic hard segment and epoxy-phobic soft segment led to dispersed soft-segment domains in the nanonetwork-structured epoxy matrix with superior interfacial strength for the enhancement of applied energy dissipation.
16 December 2024 in Materials Science and Engineering: A
Owing to the outstanding softening resistance and thermal stability of BCC-structured refractory high-entropy alloys (HEAs), their unique deformation-induced defect structures merit investigation. Therefore, this study evaluated the mechanical properties and deformation behaviors of W-based low- to high-entropy alloys at various temperatures and orientations using nanoindentation and microcompression, complemented by post-mortem TEM and atomistic simulations to observe dislocation populations and their evolution. Results reveal that HEAs exhibit reduced elastic and plastic anisotropy while retaining high-temperature strength. With increasing compositional complexity, planar slip and abrupt stress drops were progressively replaced by homogeneous flow and smoother serrations. Severe lattice distortion promoted dislocation nucleation but impeded long-range glide, enabling cooperative edge and screw dislocation activity that sustained strength and work hardening across temperatures.
Refractory high-entropy alloys are promising candidates for high-temperature applications, but their practical use is restricted by the strength-ductility trade-off and oxygen-induced intergranular embrittlement. This study addresses these challenges by developing single-phase body-centered cubic HfMoNbTaTiVZr-based alloys through tuning the ratios of Group IV–VI elements and boron microalloying (0.1–0.3 at.%) to enhance grain boundary cohesion. At room temperature, boron doping suppresses brittle intergranular fracture and promotes intrinsic transgranular failure, achieving a yield strength of 1074 MPa and 10.1% elongation. Such exceptional performance is retained at 1000°C, with a yield strength of approximately 150 MPa and tensile ductility reaching up to 95.6%. Under sustained tensile loading, creep tests at 900–1000°C reveal a solute-drag-controlled mechanism, with Mo addition significantly improving creep resistance. Collectively, these findings highlight the synergy between matrix tuning and boron doping for achieving robust high-temperature tensile and creep performance in refractory high-entropy alloys.