A novel photocatalyst based on the design of P-N heterojunction between hollow spherical Mn3O4 and nanorods shape of α-Ag2WO4 is synthesized using a sonication-deposition–precipitation route. The nanocomposite Mn3O4/α-Ag2WO4(60%) exhibits a great potential towards nitroarenes (including 4-nitrophenol, 4-nitro-aniline and 4-Nitro-acetanilide) reduction under visible light irradiation exceeding that of Mn3O4/α-Ag2WO4(40%) as well as their individual counterparts (3–5%). The Mn3O4/α-Ag2WO4(60%) catalyst exhibited an excellent photo-reduction activity comprised of 0.067 s−1 towards 4-nitrophenol (0.001 M) in only 60 s reaction time using NaBH4 (0.2 M). This was due to the successful formation of the Mn3O4/α-Ag2WO4 composite as validated by XRD, TEM-SAED, XPS, FTIR, UV–Vis diffuse reflectance and PL techniques. Decreasing the Eg value into 2.7 eV, the existence of a new (151) plane in the composite beside enhancement of the composite electrical conductivity (1.66 × 10–7 Ω−1 cm−1) helps the facile nitroarenes adsorption and hydrogenation. Transient photocurrent response and linear sweep voltammetry results prove the facilitation of photogenerated charge carriers separation and transport via improving electron lifetime and lessening recombination rate. The composite photocatalyst produced higher amounts of H2 production, when inserted in a typical reaction medium containing NaBH4, comprised of 470 µ mole/g exceeding those of the counterparts (35 µ mole/g). This photocatalyst is strikingly hydrogenated 4-nitrophenol under mild conditions (25 °C and 0.35 MPa pressure of H2) with magnificent rate constant equal 34.9 × 10−3 min−1 with 100% selectivity towards 4-aminophenol.
The necessity for efficient water treatment methods has led the research community to turn to hybrid technologies that combine individual advantages optimally for a greater final result. Membranes are vital to water purification technologies due to their natural barrier and filtration capabilities. On the other hand, green catalytic technologies such as photocatalysis and electrocatalysis have attracted increased attention for water purification applications due to a multitude of advantages. Therefore, the combination of catalytic and membrane technologies is the natural next step. This review focuses on several aspects of this hybrid technology: several promising materials are presented, the fabrication methods and challenges for the successful integration of the two technologies are examined, and the mechanisms for micropollutant removal are detailed. Finally, future perspectives are offered concerning these hybrid technologies. This review aims to shed light on this promising trend of membrane-based photocatalytic/electrocatalytic systems and their potential for efficient water treatment.
Herein, this work aims to fabricate well-ordered nanonetwork epoxy resin modified with poly(butyl acrylate)-b-poly(methyl methacrylate) (PBA-b-PMMA) block copolymer (BCP) for enhanced energy dissipation using a self-assembled diblock copolymer of polystyrene-b-poly(dimethylsiloxane) (PS-b-PDMS) with gyroid and diamond structures as templates. A systematic study of mechanical properties using nanoindentation of epoxy resin with gyroid- and diamond-structures after modification revealed significant enhancement in energy dissipation, with the values of 0.36 ± 0.02 nJ (gyroid) and 0.43 ± 0.03 nJ (diamond), respectively, when compared to intrinsic epoxy resin (approximately 0.02 ± 0.002 nJ) with brittle characteristics. This enhanced property is attributed to the synergic effect of the deliberate structure with well-ordered nanonetwork texture and the toughening of BCP-based modifiers at the molecular level. In addition to the deliberate structural effect from the nanonetwork texture, the BCP modifier composed of epoxy-philic hard segment and epoxy-phobic soft segment led to dispersed soft-segment domains in the nanonetwork-structured epoxy matrix with superior interfacial strength for the enhancement of applied energy dissipation.
Herein, this work aims to develop a facile method for the fabrication of metallic mechanical metamaterial with a well-ordered diamond structure from a bottom-up approach using a self-assembled block copolymer for templated electrochemical deposition. By controlling the effective volume fraction of PDMS in PS-b-PDMS via solvent annealing followed by HF etching of PDMS, it is feasible to obtain nanoporous PS with diamond-structured nanochannels and used it as a template for templated electrochemical deposition. Subsequently, well-ordered nanonetwork gold (Au) can be fabricated. As evidenced by nanoindentation and micro-compression tests, the mechanical properties of the diamond-structured Au after removal of PS give the combination of lightweight and mechanically robust characteristics with an exceptionally high reduced elastic modulus of 11.9 ± 0.6 GPa and yield strength of 193 ± 11 MPa above the Hashin-Shtrikman upper bound of 72 MPa with a bending-dominated structure at equivalent density. The corresponding deformation mechanism can be elucidated by morphological observations experimentally and finite element analysis (FEA) numerically. This work demonstrates the bottom-up approach to fabricating metallic monolith with diamond structure in the nanoscale, giving a superior performance as mechanical metamaterials.