Christian A. Barrera-Vargas

Mr. Christian A. Barrera-Vargas

Ph.D Student
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 August 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Christian A. Barrera-VargasChristian A. Barrera-Vargas
Christian A. Barrera-Vargas
Iván M. DíazIván M. Díaz
Iván M. Díaz
Jose M. SoriaJose M. Soria
Jose M. Soria
Jaime H. García-PalaciosJaime H. García-Palacios
Jaime H. García-Palacios
Friction pendulum systems (FPSs) are a common solution for isolating civil engineering structures under ground movements. The result is a base-isolated structure in which the base exhibits low shear stiffness in such a way that the input energy of the earthquake is concentrated and dissipated into it, leaving the superstructure free of damage. As a consequence, large displacements of the FPS may be demanded depending on the earthquake intensity and the fundamental period of the FPS. To accommodate these displacements, large-size isolators with high friction coefficients are usually required. However, the FPS will then exhibit poor re-centering capacity and the risk of future shocks will increase due to previous residual displacements, especially for low-intensity earthquakes. An alternative solution is to include a semi-active damper to the FPS, keeping the friction coefficient low and achieving both, limited base displacement under high-intensity earthquakes and good re-centering capacity under low-intensity ones. Thus, this work presents a design methodology for base isolators formed by an FPS with a damper added. The design methodology is applied to an FPS with a passive damper and to an FPS with a semi-active damper. Two ON-OFF control strategies are studied: (i) a fairly simple phase control, and (ii), a mechanical energy-predictive based algorithm. The advantages of semi-active FPSs with low friction coefficients with respect to FPS with high friction coefficients are demonstrated. The results with the designed semi-active FPS are compared with the single FPS and the FPS with a passive damper. Finally, the use of semi-active FPS allows us to enhance the FPS performance as the isolator size can be reduced while keeping the capacity to cope with low and high-intensity earthquakes without residual displacements.

28 March 2022 in Actuators
Verified
Journal Article
Open access
PDF file
Christian A. Barrera-VargasChristian A. Barrera-Vargas
Christian A. Barrera-Vargas
JNJavier Naranjo
Javier Naranjo
Iván M. DíazIván M. Díaz
Iván M. Díaz
Jaime H. García-PalaciosJaime H. García-Palacios
Jaime H. García-Palacios
Lightweight pedestrian structures constructed with high strength-to-weight ratio materials, such as fiber-reinforced polymers (FRP), may experience large accelerations due to their lightness, thus overcoming the serviceability limit state. Additionally, uncertainties associated with human–structure interaction phenomena become relevant. Under these circumstances, variations in pedestrian actions could modify the modal properties of the coupled human–structure system and classical approaches based on passive Tuned Mass Dampers (TMD) do not offer an effective solution. An alternative solution is to use a Semiactive TMD (STMD), which includes a semiactive damper that, when properly designed, may be effective for a relatively broad frequency band, offering a robust solution when significant uncertainties are present. Thus, this paper presents a design methodology for the design of STMDs applied to lightweight pedestrian structures including human–structure and actuator–structure interaction. A multiobjective optimization procedure has been proposed to simultaneously minimize structure acceleration, inertial mass, and maximum damper force. The methodology has been applied to a lightweight FRP footbridge. Realistic simulations, including system uncertainties, interaction phenomena, nonlinear damper model, noise-contaminated signals, and the practical elements (in-line digital filters) needed for the successful implementation of the control law, validate the methodology. As a conclusion, the STMD is more effective than its passive counterpart in both, canceling the response or achieving similar performance with significant lower inertial mass.



10 July 2026 in Actuators
Verified
Journal Article
Open access
PDF file
Christian A. Barrera-VargasChristian A. Barrera-Vargas
Christian A. Barrera-Vargas
CGChristian Gallegos-Calderón
Christian Gallegos-Calderón
Iván M. DíazIván M. Díaz
Iván M. Díaz
The application of semi-active control systems in lightweight civil engineering structures is still limited even though several studies have shown an improvement in mitigating vibrations under uncertainty scenarios. In comparison with passive systems, a smart device is employed in a Semi-active Tuned Mass Damper (STMD) system to modify its response in real time, usually the damping force. Based on a control law, a degree of adaptability can be achieved in the smart device, leading to the desired tuning between the structure and the STMD to mitigate the vibration induced by the external force, especially when a detuned response between the structure and the control system is caused by external uncertainties. The magneto-rheological (MR) damper is the most common device used for this purpose. Thus, the practical implementation of an STMD in lightweight structures subjected to human-induced vibrations is presented in this paper. An STMD equipped with two sponge MR dampers is developed, modeled, and installed in a fiber-reinforced polymer footbridge, which fulfills the state requirements but exhibits excessive vibrations when its first vertical vibration mode is excited. Numerical simulations are also carried out considering human-structure-STMD interaction. For the analyses, a Mass-Spring-Damper system is used to depict a pedestrian, and the functioning of the MR dampers is represented through a hyperbolic tangent model. Additionally, three different phase control laws are considered for the numerical and experimental implementation of the STMD, namely: (i) an On-Off controller, (ii) a fixed gain controller, and (iii) a variable gain controller. The comparison of the numerical and test results shows that the model used for the MR damper and the STMD are adequate.