Worldwide, the need for thermal insulation materials used to increase the energy performance of buildings and ensure indoor thermal comfort is constantly growing. There are several traditional, well-known and frequently used thermal insulation materials on the building materials market, but there is a growing trend towards innovative materials based on agro-industrial waste. This paper analyses the performance of 10 such innovative thermal insulation materials obtained by recycling cellulosic and/or animal waste, using standardised testing methods. More precisely, thermal insulation materials based on the following raw materials were analysed: cellulose acetate, cigarette filter manufacturing waste; cellulose acetate, cigarette filter manufacturing waste and cigarette paper waste; cellulose acetate, waste from cigarette filter manufacturing, waste cigarette paper and waste aluminised paper; cellulose from waste paper (two types made by two independent manufacturers); wood fibres; cellulose from cardboard waste; cellulose from waste cardboard, poor processing, inhomogeneous product; rice husk waste and composite based on sheep wool, recycled PET fibres and cellulosic fibres for the textile industry. The analysis followed the performance in terms of thermal insulating quality, evidenced by the thermal conductivity coefficient (used as a measurable indicator) determined for both dry and conditioned material at 50% RH, in several density variants, simulating the subsidence under its own weight or under various possible stresses arising in use. The results showed in most cases that an increase in material density has beneficial effects by reducing the coefficient of thermal conductivity, but exceptions were also reported. In conjunction with this parameter, the analysis of the 10 types of materials also looked at their moisture sorption/desorption capacity (using as a measurable indicator the amount of water stored by the material), concluding that, although they have a capacity to regulate the humidity of the indoor air, under low RH conditions the water loss is not complete, leaving a residual quantity of material that could favour the development of mould. Therefore, the impact on indoor air quality was also analysed by assessing the risk of mould growth (using as a measurable indicator the class and performance category of the material in terms of nutrient content conducive to the growth of microorganisms) under high humidity conditions but also the resistance to the action of two commonly encountered moulds, Aspergillus niger and Penicillium notatum. The results showed a relative resistance to the action of microbiological factors, indicating however the need for intensified biocidal treatment.

The current context provides, worldwide, the need to identify solutions for the thermal efficiency of constructions, through sustainable and innovative methods and products. A viable solution is to produce thermal insulating products by carding-folding technology, using natural fibres and recycled polyethylene terephthalate (rPET) and polyester (rPES) waste, converted to fibres. This paper presents experimental results obtained after testing several thermal insulation composite products produced using a mix of sheep wool, cellulose, rPET and rPES fibres. The results of the research demonstrate the thermal insulation properties but, at the same time, identify the benefits of using such materials on the quality of the air in the interior space (the ability to adjust humidity and reduce the concentration of harmful substances). At the same time, the advantages of using sheep wool composite mattresses concerning their resistance to insect attack is demonstrated when compared with ordinary thermal insulation materials. Finally, sensitivity elements of these composites are observed in terms of sensitivity to mould, and to contact with water or soil, drawing future research directions in the development of this type of materials.

The inadequate thermal performance of existing buildings and ventilation strategies in buildings are currently the biggest challenges for the housing sector in Central and Eastern Europe in the context of addressing the sustainability and health of the built environment. Lack of adequate ventilation of indoor spaces causes poor air quality and a higher incidence of sick building syndrome (SBS), which is manifested by affecting the comfort and wellbeing in the living space. Ensuring high energy performance buildings and indoor air quality is efficiently approached by limiting emissions from sources or by partial neutralization of the pollutants, an important stage being the establishing specific emissions levels by performing monitoring studies of indoor air quality. In this context, the paper presents experimental studies focused on monitoring the concentrations of volatile organic compounds, inorganic compounds and particulate matter, from indoor air in residential spaces located in the urban area of Bucharest, Romania. The obtained results highlight the fact that in analysed spaces there are concentrations of pollutants whose values should be considered to improve the indoor air quality while addressing effectively the upgrade of energy performance in buildings

This case study focuses on twelve compacted clay soil samples to understand their fundamental physical and thermal properties. For each sample, the density, thermal conductivity, thermal diffusivity, specific heat, and drying shrinkage were assessed. The identification and characterisation of the materials were also carried out by positioning them into the ternary diagram based on the percentage of sand, silt, and clay. These properties are definitive for the performance characteristics of materials used in rammed earth wall construction. The aim is to provide information for better knowledge and prediction regarding the dynamic heat flow in rammed earth walls. Experimental results show a relatively wide range of values for each property, reflecting the diverse properties of the sampled clays. The thermophysical characteristics of the 12 types of earth analysed showed correlations with reports in the literature in terms of density (1490–2150 kg/m³), porosity (23.22–39.99%), specific heat capacity (701–999 J/kgK), and thermal conductivity (0.523–1.209 W/mK), which indicates them as materials suitable for use in the construction of rammed earth walls. Using test data, a dynamic assessment of heat flow through simulated rammed earth walls was performed. For a better understanding of the results obtained, they were compared with results obtained for simulations where the building element would be made of concrete, i.e., a mineral wool core composite. Thus, heat flux at the wall surface and mass flux, respectively, during the 16 years of operation showed similar evolution for all 12 types of clay material analysed, with small variations explained by differences in thermophysical characteristics specific to each type of S1–S12 earth. In the case of walls made from clay material, there is a stabilisation in the evolution of the water content phenomenon by the 5th year of simulation. This contrasts with walls made of concrete, where the characteristic water content appears to evolve continuously over the 16-year period. Therefore, it can be said that in the case of the construction elements of existing buildings, which have already gone through a sufficient period for the maturation of the materials in their construction elements, the rammed earth wall quickly develops a moisture buffer function. In the case of simulating a mineral wool core composite wall, it cannot perform as a temperature or humidity buffer, exhibiting an enthalpy exchange with indoor air that is only 4% of that of the rammed earth walls; consequently, it does not play a significant role in regulating indoor comfort conditions. Overall, there is confirmation of the temperature and moisture buffering capabilities of rammed earth walls during both warm and cold periods of the year, which is consistent with other reports in the literature. The findings of this research provide a better insight into clay as a material for rammed earth walls for more efficient design and construction, offering potential improvements regarding indoor comfort, energy efficiency, and sustainability. The data also provides useful information in the fields of architecture and civil engineering regarding the use of clay as an eco-friendly building material. The results emphasise the importance of thoroughly understanding the thermophysical properties of clay to ensure the efficiency of rammed earth construction.

Indoor air quality (IAQ) and energy consumption (Q) are well-known building estimators, but they are used separately. Energy consumption is used during the design stage, while IAQ is used during operation. The novelty of our approach is that we propose using both estimators simultaneously during building operations. The purpose of this study was to find an adaptive ventilation strategy that maintained good indoor air quality with minimal energy consumption. The second novelty of our approach consists of IAQ estimation. While the operation of ventilation systems depends only on the indoor carbon dioxide (CO₂) concentration at present, our novel approach uses a more global IAQ index that includes four different air pollutants. Physical models are used for the hourly prediction of the two indices: global IAQ and Q. This study presents a comparative analysis of several ventilation operations strategies: fixed versus adaptive. The main findings show that a decrease in the ventilation rate, n_a, from 3.5 h⁻¹ to 2.0 h⁻¹ leads to a diminishment in energy consumption of 42.9%, maintaining the global IAQ index under the limited health risk value (VRL). Moreover, an adaptive ventilation strategy of n_a, maintaining the global IAQ index value under VRL, achieves a further reduction in energy consumption of 72.9%, highlighting its efficiency.