Hegyi Andreea

Dr. Hegyi Andreea

orcid

Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2016 in Procedia Technology
Verified
Journal Article
Open access
GCGabriela Calatan
Gabriela Calatan
Hegyi AndreeaHegyi Andreea
Hegyi Andreea
CDCarmen Dico
Carmen Dico
CMCalin Mircea
Calin Mircea
Housing construction technology using clay soil in various forms - paved, adobe bricks form or other - is already known and used since ancient times. Over the years, there have been numerous studies and research to improve this technology and to obtain more resistant, comfortable and durable structures. This paper presents an experimental study regarding the effectiveness of natural fiber disperse reinforcement in the adobe bricks. The results indicate an improved mechanical strength and a better thermal conductivity of the clay composite material. The variation of watched physical-mechanical parameters was influenced by the type of the used organic material, hemp fiber or straw, and of the amount entered in the mixture. By analyzing simultaneously all watched physical-mechanica parameters, for the used clay mixture, it was set an optimum addition of hemp fibers, as 9-10% percent by volume, respectively an optimal straw addition, 30-40% percent by volume

22 May 2022 in Polymers
Verified
Journal Article
Open access
PDF file
TDTünde-Orsolya Dénes
Tünde-Orsolya Dénes
Raluca IstoanRaluca Istoan
Raluca Istoan
DTDaniela-Roxana Tămaş-Gavrea
Daniela-Roxana Tămaş-Gavrea
Daniela Lucia ManeaDaniela Lucia Manea
Daniela Lucia Manea
Hegyi AndreeaHegyi Andreea
Hegyi Andreea
Ovidiu VASILEOvidiu VASILE
Ovidiu VASILE
The aim of this paper is to propose ecological thermal insulation materials that meet the goals of sustainability but also fulfill the imposed thermal performance requirements. This paper studies new composite materials based on sheep wool from the perspective of thermal conductivity. The composites were prepared using two types of binder: acrylic-polyurethane resin and natural rubber latex, which were applied to the wool fibres through different methods and percentages. Based on the obtained results of thermal conductivity, two types of samples were selected for further analysis, which aimed to determine the microstructure, chemical composition, water absorption, attack of microorganisms, water vapour permeability, hygrothermal adsorption characteristics and sound absorption of the samples. In order to analyse the variation of thermal conductivity, the following parameters were taken into account: thickness, density, type of binder and percentage of binder. Following the obtained results, it was observed that the value of the thermal conductivity of the samples varies between 0.0324 and 0.0436 W/mK. It was found that all the samples prepared and analysed in this study fulfil the national criteria for the thermal performance of thermal insulation material. After conducting the in-depth analysis of the two selected sample types, it was concluded that both materials have good sound absorption characteristics over the considered frequency range. In addition, as it was expected from the natural fibres, the samples had low resistance against the attack of microorganisms and water-related tests.

3 August 2023 in Materials
Verified
Journal Article
Open access
PDF file
Cristian PetcuCristian Petcu
Cristian Petcu
Hegyi AndreeaHegyi Andreea
Hegyi Andreea
Vlad StoianVlad Stoian
Vlad Stoian
CDClaudiu-Sorin DRAGOMIR
Claudiu-Sorin DRAGOMIR
ACAdrian Alexandru Ciobanu
Adrian Alexandru Ciobanu
CFCarmen Florean
Carmen Florean
Worldwide, the need for thermal insulation materials used to increase the energy performance of buildings and ensure indoor thermal comfort is constantly growing. There are several traditional, well-known and frequently used thermal insulation materials on the building materials market, but there is a growing trend towards innovative materials based on agro-industrial waste. This paper analyses the performance of 10 such innovative thermal insulation materials obtained by recycling cellulosic and/or animal waste, using standardised testing methods. More precisely, thermal insulation materials based on the following raw materials were analysed: cellulose acetate, cigarette filter manufacturing waste; cellulose acetate, cigarette filter manufacturing waste and cigarette paper waste; cellulose acetate, waste from cigarette filter manufacturing, waste cigarette paper and waste aluminised paper; cellulose from waste paper (two types made by two independent manufacturers); wood fibres; cellulose from cardboard waste; cellulose from waste cardboard, poor processing, inhomogeneous product; rice husk waste and composite based on sheep wool, recycled PET fibres and cellulosic fibres for the textile industry. The analysis followed the performance in terms of thermal insulating quality, evidenced by the thermal conductivity coefficient (used as a measurable indicator) determined for both dry and conditioned material at 50% RH, in several density variants, simulating the subsidence under its own weight or under various possible stresses arising in use. The results showed in most cases that an increase in material density has beneficial effects by reducing the coefficient of thermal conductivity, but exceptions were also reported. In conjunction with this parameter, the analysis of the 10 types of materials also looked at their moisture sorption/desorption capacity (using as a measurable indicator the amount of water stored by the material), concluding that, although they have a capacity to regulate the humidity of the indoor air, under low RH conditions the water loss is not complete, leaving a residual quantity of material that could favour the development of mould. Therefore, the impact on indoor air quality was also analysed by assessing the risk of mould growth (using as a measurable indicator the class and performance category of the material in terms of nutrient content conducive to the growth of microorganisms) under high humidity conditions but also the resistance to the action of two commonly encountered moulds, Aspergillus niger and Penicillium notatum. The results showed a relative resistance to the action of microbiological factors, indicating however the need for intensified biocidal treatment.

8 May 2021 in Materials
Verified
Journal Article
Open access
PDF file
Hegyi AndreeaHegyi Andreea
Hegyi Andreea
CBCezar Bulacu
Cezar Bulacu
Henriette SzilagyiHenriette Szilagyi
Henriette Szilagyi
Adrian-Victor LazarescuAdrian-Victor Lazarescu
Adrian-Victor Lazarescu
VMVasile Meiţă
Vasile Meiţă
MSMihaela Sandu
Mihaela Sandu
Currently, the need to ensure adequate quality of air inside the living space but also the thermal efficiency of buildings is pressing. This paper presents the capacity of sheep wool heat-insulating mattresses to simultaneously provide these needs, cumulatively analyzing efficiency indicators for thermal insulation and indicators of improving air quality. Thus, the values obtained for the coefficient of thermal conductivity, and its resistance to heat transfer, demonstrate the suitability of their use for thermal insulation. The results of the permeability to water vapor characteristics on the sorption/desorption of water, air, demonstrate the ability to control the humidity of the indoor air and the results on the reduction of the concentration of formaldehyde, demonstrating their contribution to the growth of the quality of the air, and to reduce the risk of disease in the population.

11 February 2022 in Materials
Verified
Journal Article
Open access
PDF file
Hegyi AndreeaHegyi Andreea
Hegyi Andreea
Horatiu VermesanHoratiu Vermesan
Horatiu Vermesan
Adrian-Victor LazarescuAdrian-Victor Lazarescu
Adrian-Victor Lazarescu
Cristian PetcuCristian Petcu
Cristian Petcu
CBCezar Bulacu
Cezar Bulacu
The current context provides, worldwide, the need to identify solutions for the thermal efficiency of constructions, through sustainable and innovative methods and products. A viable solution is to produce thermal insulating products by carding-folding technology, using natural fibres and recycled polyethylene terephthalate (rPET) and polyester (rPES) waste, converted to fibres. This paper presents experimental results obtained after testing several thermal insulation composite products produced using a mix of sheep wool, cellulose, rPET and rPES fibres. The results of the research demonstrate the thermal insulation properties but, at the same time, identify the benefits of using such materials on the quality of the air in the interior space (the ability to adjust humidity and reduce the concentration of harmful substances). At the same time, the advantages of using sheep wool composite mattresses concerning their resistance to insect attack is demonstrated when compared with ordinary thermal insulation materials. Finally, sensitivity elements of these composites are observed in terms of sensitivity to mould, and to contact with water or soil, drawing future research directions in the development of this type of materials.

2 June 2022 in Materials
Verified
Journal Article
Open access
PDF file
Ioana Monica SurIoana Monica Sur
Ioana Monica Sur
VMValer Micle
Valer Micle
Hegyi AndreeaHegyi Andreea
Hegyi Andreea
Adrian-Victor LazarescuAdrian-Victor Lazarescu
Adrian-Victor Lazarescu
Environmental pollution has particular implications for the whole geosystem and increases the global risk to human and ecological health. In this regard, investigations were carried out on soil samples to perform the quality status assessment by determining: pH, texture, structure and metal concentration, as well as carrying out an assessment of anthropogenic activity by determining pollution indices: Cf (contamination factor), Cd (degree of contamination), PLI (pollution load index), Er (ecological risk index) and PERI (potential ecological risk index). Analyses on soil samples showed high concentrations of metals (Cu: 113–2996 mg kg−1; Pb: 665–5466 mg kg−1; Cr: 40–187 mg kg−1; Ni: 221–1708 mg kg−1). The metal extraction experiments were carried out by bioleaching using Thiobacillusferrooxidans, microorganisms at different amounts of bioleaching solution (20 mL and 40 mL 9K medium) and a stirring time of up to 12 h. The results on the degree of contamination, pollution loading index PLI (2.03–57.23) and potential ecological risk index PERI (165–2298) indicate that the soils in the studied area have a very high degree of pollution. The decontamination procedure by bioleaching showed a decrease, but at the end of the test (12 h), the followed indices indicate high values, suggesting that bioleaching should continue. The depollution yield after 12 h of treatment is, however, encouraging: Cu 29–76%, Pb: 10–32%, Cr: 39–72% and Ni 44–68%. The use of yield–time correlation equations allows the identification of the optimal exposure time on the bioleaching extraction process to obtain optimal results. The aim of the research is to determine the soil quality, soil environmental risk, extraction of metals from polluted soils by bioleaching and to identify influencing factors in achieving high remediation yields.