This study designed a wide-beamwidth pixelated dielectric resonator antenna (DRA) combined with a low-pass filter (LPF) to suppress harmonics. The DRA was designed to create a wide-beam pattern with a pixelated structure. The pixelated DRA was optimized by a genetic-learning particle swarm optimization algorithm. To prevent significant higher-mode radiation and harmonics from occurring in the DRA, an LPF was included in its feeding line. The filter had a seventh-order Chebyshev design, and a hybrid step-impedance filter was proposed by modifying the step-impedance filter for use in narrow spaces behind the ground.
This paper proposes a quasi-isotropic hybrid dielectric resonator antenna (DRA) and bow-tie patch with harmonics suppression. The suggested antenna consists of a DRA, a bow-tie patch, and a microstrip seventh-order Chebyshev low-pass filter. By loading a bow-tie patch on the designed DRA, a quasi-isotropic pattern is realized. The seventh-order Chebyshev low-pass filter was applied to the feed line, and harmonics were reduced in the section separate to the operating band to remove harmonics generated by the proposed antenna. The simulated that satisfies below −10 dB is 3.09–3.3 GHz (6.25%), and the measured S11 is 3.10–3.28 GHz (5.64%). The simulated gain difference considering all radiating regions ( and ) is 7.211 dB. Compared with the antenna without a filter, the harmonic gain was reduced by 10.847 and 15.774 dB. The measured gain isolation of the operating band and the second and third harmonics are 10.10 and 18.94 dB, respectively. The proposed antenna is considered to be applicable to applications that require radio wave reception in all directions such as wireless point access points, internet of things and radio frequency identification, and is expected to contribute to reducing the size of the RF system.
31 October 2022 in The Journal of Korean Institute of Electromagnetic Engineering and Science