This study investigates the pyrolytic decomposition of apple and potato peel waste using thermogravimetric analysis (TGA). In addition, using Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS), the influence of pyrolysis temperature on the physicochemical characteristics and structural properties of biochar was studied. The degradation of biomass samples was studied between 25 °C and 800 °C. Although apple and potato peel decomposition present similar thermogravimetric profiles, there are some differences that can be evidenced from DTG curves. Potato peel showed one degradation peak in the range 205–375 °C with 50% weight loss; meanwhile, the apple peel exhibited two stages: one with a maximum at around 220 °C and about 38% weight loss caused by degradation of simple carbohydrates and a second peak between 280 °C and 380 °C with a maximum at 330 °C, having a weight loss of approximately 24%, attributed to cellulose degradation. To gain more insight into the phenomena involved in biomass conversion, the kinetics of the reaction were analyzed using thermal data collected in non-isothermal conditions with a constant heating rate of 5, 10, 20, or 30 °C /min. The kinetic analysis for each decomposed biomass (apple and potato) was carried out based on single-step and multi-step type techniques by combining the Arrhenius form of the decomposition rate constant with the mass action law. The multi-step approaches provided further insight into the degradation mechanisms for the whole range of the decomposition temperatures. The effect of temperature on biomass waste structure showed that the surface morphologies and surface functional groups of both samples are influenced by the pyrolysis temperature. A higher pyrolysis temperature of 800 °C results in the disappearance of the bands characteristic of the hydroxyl, aliphatic, ether, and ester functional groups, characteristic of a porous surface with increased adsorption capacity. Therefore, this study concludes that biomass waste samples (apple and potato) can produce high yields of biochar and are a potential ecological basis for a sustainable approach. The preliminary adsorption tests show a reasonably good nitrate removal capacity for our biochar samples.

Glass-fiber-reinforced polymer (GFRP) composites are widely used due to their high strength-to-weight ratio and corrosion resistance. However, their properties can degrade under different environmental conditions, affecting long-term reliability. This study examines the effects of temperature and chemical environments on GFRP pipes. Specimens were exposed to salt water and alkaline solutions at 20 °C and 50 °C. Diffusion coefficients and tensile and flexural properties were measured. Advanced techniques (TGA, FT-IR, and XRD) showed a 54.73% crystallinity difference between samples at 20 °C/air and 50 °C/salt water. Elevated temperatures and alkaline conditions accelerated degradation, with diffusion coefficients 68.38% higher at 50 °C/salt water compared to at 20 °C/salt water. Flexural strength decreased by 47.65% and tensile strength by 13.89%, at 50 °C/alkaline compared to 20 °C/air. Temperature was identified as the primary factor affecting mechanical performance, while alkaline environments significantly influenced tensile and flexural modulus. These results underscore the importance of considering environmental factors for the durability of GFRP composites.

The removal yield of organic substances present in water depends on the environmental conditions, on the chemical composition of the water and on the chemical substance dissolved in the water, which constitutes the substrate of the metabolic activities of the microalgae that use these substances in the biochemical reactions of cellular enzyme complexes. o-Chlorobenzylidene malononitrile (CS, to use its military designation) was synthesized in-house, for research purposes, by a condensing reaction between o-chlorobenzaldehide and malononitrilein the presence of diethylamine. The detection, identification and confirmation of o-chlorobenzylidenemalononitrile (coded CBM in this experimental study) was performed using gas chromatography–mass spectrometry (GC-MS) and the purity of CBM was 99%. The biodegradation capacity in the samples that contained the biological suspension, after 24 h and 96 h of incubation, was determined via GC-MS analysis, and no evidence of the presence of CBM or some metabolites of CBM was detected. In the parallel samples, a hydrolysis process of CBM at room temperature, without biological treatment, revealed two main metabolites, malononitrile and o-chlorobenzaldehyde, respectively. This study is focused on evaluating the biodegradation capacity of o-chlorobenzylidene malononitrile in the presence of a biological material, culture of Chlorella sp., in comparison with a classical hydrolysis process. The tests performed indicate that the suspension of Chlorella sp. consumed the entire amount of CBM and metabolites from the analyzed samples. The tests prove that the biological material can be used to decontaminate the affected areas.

Fiber-reinforced polymers (FRPs) are increasingly recognized in sustainable materials research due to their potential environmental advantages. This study presents a focused bibliometric review of the sustainability research on FRPs. An initial search of the Web of Science (WOS) database identified 803 documents, which were refined to 749 relevant articles, reviews, and proceedings. A co-authorship analysis highlights the significant contributions of the USA and India, with European countries forming regional collaborations. The research output has steadily increased since 2011, peaking in 2022 and 2023. The multidisciplinary nature of the research spans materials science, engineering, and environmental sciences, with journals such as *Polymers*, *Sustainability*, and the *Journal of Cleaner Production* emphasizing sustainability themes. This analysis covers key aspects such as keyword co-occurrence, overlay visualizations, co-authorship networks, and the distribution of publications by year, research area, and journal. The findings underscore the evolving research landscape of sustainable FRPs and highlight the ongoing need for life cycle assessments and interdisciplinary collaboration.

Knowledge of the impact of chemicals on the environment is important for assessing the risks that chemicals can generate in ecosystems. With the help of pilot-scale micro-tests, it was possible to evaluate the biological sludge in terms of its chemical and biological composition, information that can be applied on an industrial scale in treatment plants. The important parameters analyzed in the evaluation of the biodegradability of wastewater were pH, chemical composition (NH₄⁺, NO₃⁻, NO₂⁻, and PO₄³⁻), dry substance (DS), inorganic substance (IS), and organic substance (OS), and the biological oxygen demand (BOD)/chemical oxygen consumption (COD) ratio. The examination revealed the presence of free active ciliates Aspidisca polystyla, Lyndonotus setigerum, Vorticella microstoma, fixed by Zooglee, Paramecium sp., Opercularia, Colpoda colpidium, Euplotes, Didinum nasutum, Stentor, and Acineta tuberosa, metazoa Rotifers, filamentous algae, Nostoc and Anabena, and bacteria Bacillus subtilis, Nocardia, and Microccocus luteus. The novelty of this study lies in the fact that we carried out a study to evaluate the population of microorganisms starting from the premise that the probability of biodegradation of substances is directly proportional to the number of microorganisms existing in the environment and their enzymatic equipment.

Chemical compounds, such as the CS gas employed in military operations, have a number of characteristics that impact the ecosystem by upsetting its natural balance. In this work, the toxicity limit and microorganism’s reaction to the oxidative stress induced by O-chlorobenzylidenemalonitrile, a chemical found in CS gas, were assessed in relation to the green algae Chlorella pyrenoidosa. A number of parameters, including the cell growth curve, the percent inhibition in yield, the dry cell weight, the percentage viability and productivity of algal biomass flocculation activity, and the change in oxygen production, were analyzed in order to comprehend the toxicological mechanisms of O-chlorobenzylidenemalonitrile on algal culture. Using fluorescence and Fourier transform infrared spectroscopy (FTIR), the content of chlorophyll pigments was determined. The values obtained for pH during the adaptation period of the C. pyrenoidosa culture were between 6.0 and 6.8, O₂ had values between 6.5 and 7.0 mg/L, and the conductivity was 165–210 µS/cm. For the 20 µg/mL O-chlorobenzylidenemalonitrile concentration, the cell viability percentage was over 97.4%, and for the 150 µg/mL O-chlorobenzylidenemalonitrile concentration was 74%. The EC_b50 value for C. pyrenoidosa was determined from the slope of the calibration curve; it was estimated by extrapolation to the value of 298.24 µg/mL. With the help of this study, basic information on the toxicity of O-chlorobenzylidenemalonitrile to aquatic creatures will be available, which will serve as a foundation for evaluating the possible effects on aquatic ecosystems. The management of the decontamination of the impacted areas could take the results into consideration.