Vinegar is a fermented product that is appreciated world-wide. It can be obtained from different kinds of matrices. Specifically, it is a solution of acetic acid produced by a two stage fermentation process. The first is an alcoholic fermentation, where the sugars are converted in ethanol and lower metabolites by the yeast action, generally Saccharomyces cerevisiae. This was performed through a technique that is expanding more and more, the so-called “pied de cuve”. The second step is an acetic fermentation where acetic acid bacteria (AAB) action causes the conversion of ethanol into acetic acid. Overall, the aim of this research is to follow wine vinegar production step by step through the volatiloma analysis by metal oxide semiconductor MOX sensors developed by Nano Sensor Systems S.r.l. This work is based on wine vinegar monitored from the grape must to the formed vinegar. The monitoring lasted 4 months and the analyses were carried out with a new generation of Electronic Nose (EN) engineered by Nano Sensor Systems S.r.l., called Small Sensor Systems Plus (S3+), equipped with an array of six gas MOX sensors with different sensing layers each. In particular, real-time monitoring made it possible to follow and to differentiate each step of the vinegar production. The principal component analysis (PCA) method was the statistical multivariate analysis utilized to process the dataset obtained from the sensors. A closer look to PCA graphs affirms how the sensors were able to cluster the production steps in a chronologically correct manner.
Extra virgin olive oil (EVOO) is the best vegetable oil worldwide but, at the same time, is one of the product victims of fraud in the agri-food sector, and the differences about quality within the extra-virgin olive oil category are often missed. Several scientific techniques were applied in order to guarantee the authenticity and quality of this EVOO. In the present study, the volatile compounds (VOCs) by gas chromatography–mass spectrometry with solid-phase micro-extraction detection (GC–MS SPME), organoleptic analysis by the official Slow Food panel and the detection by a Small Sensor System (S3) were applied. Ten EVOOs from Umbria, a central Italian region, were selected from the 2021 Slow Food Italian extra virgin olive oil official guide, which includes hundreds of high-quality olive oils. The results demonstrated the possibility to discriminate the ten EVOOs, even if they belong to the same Italian region, by all three techniques. The result of GC–MS SPME detection was comparable at the discrimination level to the organoleptic test with few exceptions, while the S3 was able to better separate some EVOOs, which were not discriminated perfectly by the other two methods. The correlation analysis performed among and between the three methodologies allowed us to identify 388 strong associations with a p value less than 0.05. This study has highlighted how much the mix of VOCs was different even among few and localized EVOOs. The correlation with the sensor detection, which is faster and chipper compared to the other two techniques, elucidated the similarities and discrepancies between the applied methods.
There are different methods to extract and brew coffee, therefore, coffee processing is an important factor and should be studied in detail. Herein, coffee was brewed by means of a new espresso professional coffee machine, using coffee powder or portioned coffee (capsule). Four different kinds of coffees (Biologico, Dolce, Deciso, Guatemala) were investigated with and without capsules and the goal was to classify the volatiloma of each one by Small Sensor System (S3). The response of the semiconductor metal oxide sensors (MOX) of S3 where recorded, for all 288 replicates and after normalization ∆R/R0 was extracted as a feature. PCA analysis was used to compare and differentiate the same kind of coffee sample with and without a capsule. It could be concluded that the coffee capsules affect the quality, changing on the flavor profile of espresso coffee when extracted different methods confirming the use of s3 device as a rapid and user-friendly tool in the food quality control chain.
We evaluated the efficacy of an innovative technique using an S3+ device equipped with two custom-made nanosensors (e-nose). These sensors are integrated into kitchen appliances, such as planetary mixers, to monitor and assess dough leavening from preparation to the fully risen stage. Since monitoring in domestic appliances is often subjective and non-reproducible, this approach aims to ensure safe, high-quality, and consistent results for consumers. Two sensor chips, each with three metal oxide semiconductor (MOS) elements, were used to assess doughs prepared with flours of varying strengths (W200, W250, W390). Analyses were conducted continuously (from the end of mixing to 1.5 h of leavening) and in two distinct phases: pre-leavening (PRE) and post-leavening (POST). The technique was validated through solid-phase micro-extraction combined with gas chromatography–mass spectrometry (SPME-GC-MS), used to analyze volatile profiles in both phases. The S3+ device clearly discriminated between PRE and POST samples in 3D Linear Discriminant Analysis (LDA) plots, while 2D LDA confirmed flour-type discrimination during continuous leavening. These findings were supported by SPME-GC-MS results, highlighting differences in the volatile organic compound (VOC) profiles. The system achieved 100% classification accuracy between PRE and POST stages and effectively distinguished all flour types. Integrating this e-nose into kitchen equipment offers a concrete opportunity to optimize leavening by identifying the ideal endpoint, improving reproducibility, and reducing waste. In future applications, sensor data could support feedback control systems capable of adjusting fermentation parameters like time and temperature in real time.
Beer is the most consumed alcoholic beverage; with 177.5 million kiloliters produced every year, it is one of the most relevant food products. Diacetyl is a typical byproduct of yeast metabolism that is formed during the fermentation inside breweries. The perception of this high volatile and butter-like flavor molecule varies according to the kind of beer, from a positive and highly sought characteristic to a characteristic that is avoided. Furthermore, its toxicity when inhaled has been proven. Typical diacetyl analysis includes voltametric detection and chromatographic analysis techniques. Using metal oxide sensors (MOS), this analysis can become fast and cost-effective, evaluating the differences in diacetyl concentrations through resistance variation. The S3+ (Nano Sensor Systems s.r.l.; Reggio Emilia, Italy; device can recognize volatile compounds through a tailormade array of different materials. The results can be shown on a PCA that is directly generated by the instruments and can be used to manage the productive process through an IoT integrated system. Testing different beer typology through electrochemical sensors allows for the validation of this new approach for diacetyl evaluation. The results have shown an excellent ability to detect diacetyl in different beer samples, perfectly discriminating among different concentrations.
Nowadays, innovation in food technologies is fundamental and consumers are increasingly aware and demanding. To create a final product that is more and more appealing, health and safety guidelines are pushing towards new challenges. It is precisely due to the high quality required by the producers that the aim discussed in this project has been conceived. Until today, the controls on the entire production line have been slowed down by the limitations of the technologies involved, including the high cost of instrumentation for microbiological analysis, the need for qualified personnel to carry them out, the long execution times and the invasiveness of the techniques themselves. This project has, therefore, proposed a user-friendly solution that is minimally invasive, fast and at a lower cost. This system makes use of classical microbiological analysis and, in parallel, use of an innovative electronic-nose small sensor system (S3+), which can be trained to recognize the volatile fingerprint of a specific product and customized for a specific use. The aim of this project was to develop a system that is able to detect the mold contamination on fruit and vegetable jams and marmalades, using a new kind of innovative metal semiconductor gas sensor (MOS) device. The application of this technology has, therefore, made it possible to classify various samples of uncontaminated and contaminated fruit and vegetable preparations. Thanks to the classification implemented by a data-driven algorithm, it has been possible to build an anomaly detector that is able to recognize the occurrence of possible contamination, thus acting as an early alert system in the food chain. All this will occur in less than 1 min once the system is trained, in contrast with classical microbiological or chemical techniques that normally require longer timeframes to obtain a result and involve the use of reagents, increasing the costs.