Next-generation wireless systems will offer integrated sensing and communications (ISAC) functionalities not only in order to enable new applications, but also as a means to mitigate challenges such as doubly-dispersive channels, which arise in high mobility scenarios and/or at millimeter-wave (mmWave) and Terahertz (THz) bands. An emerging approach to accomplish these goals is the design of new waveforms, which draw from the inherent relationship between the doubly-dispersive nature of timevariant (TV) channels and the environmental features of scatterers manifested in the form of multipath delays and Doppler shifts. Examples of such waveforms are the delay-Doppler domain orthogonal time frequency space (OTFS) and the recently proposed chirp domain affine frequency division multiplexing (AFDM), both of which seek to simultaneously combat the detrimental effects of double selectivity and exploit them for the estimation (or sensing) of environmental information. This article aims to provide a consolidated and comprehensive overview of the signal processing techniques required to support reliable ISAC over doubly-dispersive channels in beyond fifth generation (B5G)/sixth generation (6G) systems, with an emphasis on OTFS and AFDM waveforms, as those, together with the traditional orthogonal frequency division multiplexing (OFDM) waveform, suffice to elaborate on the most relevant properties of the trend. The analysis shows that OTFS and AFDM indeed enable significantly improved robustness against inter-carrier interference (ICI) arising from Doppler shifts compared to OFDM. In addition, the inherent delay-Doppler domain orthogonality of the OTFS and AFDM effective channels is found to provide significant advantages for the design and the performance of integrated sensing functionalities.

Extra large MIMO (XL-MIMO) systems are subject to spatial non-stationarity forming visibility regions (VRs), which leads to a sub-array-wise sparse structure of the channel matrix. When XL-MIMO systems operate in grant-free access mode, in which only a fraction of the potential users are active during a given time slot, it follows that the channel matrix possesses a doubly-sparse and user-specific structure such that the activity of each user and each sub-array can be jointly modeled by a nested Bernoulli-Gaussian distribution. This article considers the joint activity and channel estimation (JACE) problem in XL-MIMO systems subject to this so-defined spatial non-stationarity, tackling this challenging inference problem. Our main contributions are 1) to introduce the novel Bernoulli-Gaussian model to simultaneously capture the aforementioned two distinct structured sparsities, and 2) a new bilinear Bayesian inference algorithm capable of jointly estimating the associated channel coefficients, user activity patterns, sub-array activity patterns (a.k.a. spatial non-stationarity), boosted by expectation maximization (EM)-based auto-parameterization. In addition, to shed light on a realistic modeling of VRs, we also introduce a Matérn-cluster point process (MCPP)-based approach to imitate the clustered activity pattern due to spatial non-stationarity. The efficacy of the proposed bilinear JACE algorithm is confirmed by numerical simulations, which show that the proposed method not only significantly outperforms the state-of-the-art (SotA) but also can reach the performance of a genie-aided scheme over wide signal-to-noise-ratio (SNR) ranges, in both uniformly-random and MCPP-based sub-array activity scenarios.

In this paper, a new receiver design based on basis expansion model (BEM) orthogonal time frequency space (OTFS) is presented for high-mobility communications with Doppler-spread channel. By deriving an analytical BEM OTFS system model, a low-order generalized complex exponential BEM (GCE-BEM) aided rough channel estimation is proposed at the initial stage with low pilot overhead, followed by equalization. Then, the refinement of channel estimation and equalization is conducted iteratively, in which a high-resolution GCE-BEM model with a large BEM order is adopted and the detected data symbols are exploited as pseudo-pilots, leading to higher estimation accuracy. Simulation results show that the proposed BEM OTFS receiver significantly outperforms the existing OTFS receivers in terms of the mean square error (MSE) of channel estimation and bit error rate (BER), while featuring low pilot overhead. Results also show the near-optimal performance of the novel solution, i.e. , achieved BER is very close to the case of perfect channel estimation. The theoretical lower bound on MSE of channel estimation is derived to verify the effectiveness of the proposed BEM OTFS receiver, which is shown to be close to simulation results.

This paper investigates an uplink coordinated multi-point (CoMP) coverage scenario, in which multiple mobile users are grouped for sparse code multiple access (SCMA), and served by the remote radio head (RRH) in front of them and the RRH behind them simultaneously. We apply orthogonal time frequency space (OTFS) modulation for each user to exploit the degrees of freedom arising from both the delay and Doppler domains. As the signals received by the RRHs in front of and behind the users experience respectively positive and negative Doppler frequency shifts, our proposed OTFS-based SCMA (OBSCMA) with CoMP system can effectively harvest extra Doppler and spatial diversity for better performance. Based on maximum likelihood (ML) detector, we analyze the single-user average bit error rate (ABER) bound as the benchmark of the ABER performance for our proposed OBSCMA with CoMP system. We also develop a customized Gaussian approximation with expectation propagation (GAEP) algorithm for multi-user detection and propose efficient algorithm structures for centralized and decentralized detectors. Our proposed OBSCMA with CoMP system leads to stronger performance than the existing solutions. The proposed centralized and decentralized detectors exhibit effective reception and robustness under channel state information uncertainty.

The recently proposed multichirp waveform, affine frequency division multiplexing (AFDM), is considered as a potential candidate for integrated sensing and communication (ISAC). However, acquiring accurate target sensing parameter information becomes challenging due to fractional delay and Doppler shift occurrence, as well as effects introduced by the coexistence of near-field (NF) and far-field (FF) targets associated with large-scale antenna systems. In this article, we propose a novel angle-delay-Doppler estimation scheme for AFDM-ISAC system in mixed NF and FF scenarios. Specifically, we model the received ISAC signals as a third-order tensor that admits a low-rank CANDECOMP/PARAFAC (CP) format. By employing the Vandermonde nature of the factor matrix and the spatial smoothing technique, we develop a structured CP decomposition method that guarantees the condition for uniqueness. We further propose a low-complexity estimation scheme to acquire target sensing parameters with fractional values, including angle of arrival/departure (AoA/AoD), delay and Doppler shift accurately. We also derive the Cramér-Rao Lower Bound (CRLB) as a benchmark and analyze the complexity of our proposed scheme. Finally, simulation results are provided to demonstrate the effectiveness and superiority of our proposed scheme.

Interference management has been recognized by the industry as a key enabler for 4G systems. Emerging technologies include multicarrier systems such as LTE and WiMAX for which effective management of intercell interference is of utmost importance in order to improve the Quality of Service (QoS) at cell edges. Static Intercell Interference Coordination (ICIC) techniques such as Soft Frequency Reuse (SFR) are aimed at alleviating this problem; however the usage of baseline SFR designs (schemes without optimization) only offers tradeoffs between cell edge performance and spectral efficiency and performance is indeed far from optimal as results herein confirm. Thus, this paper presents a novel multiobjective algorithm in order to address this problem and achieve effective optimization of SFR implementations. Results show that the proposed algorithm succeeds in finding good-quality SFR configurations enhancing simultaneously network capacity and cell edge performance while reducing energy consumption with respect to baseline designs and previous proposals.