The dwindling nature, high price of petroleum, concerns about climate change, as well as the ever-growing population are all urging the plastics industries to adapt sustainable natural biopolymers solutions such as PLA and PHAs.

Titanium and nickel alloys are the most commonly used in the demanding industries like aerospace, energy, petrochemical, and biomedical. These highly engineered alloys offer unique combination of heat resistance, corrosion resistance, toughness, high operating temperature, and strength-to-weight ratio. These alloys are termed as “Difficult to cut materials” because of their low machinability rating. They are difficult to machine because of properties like low thermal conductivity, high strength at elevated temperatures, and high chemical reactivity. Machining of titanium- and nickel-based alloys causes problems of surface integrity and selection of cutting tool materials that is always a challenge for manufacturers. In this work, machinability studies for titanium and nickel alloys are reviewed with reference to cutting tool materials, associated wear mechanisms, failure modes, and novel tooling techniques. It also discusses major surface integrity defects like carbide cracking, white layer formation, work hardening layer formation, residual stresses, and microstructural alterations. Major aim of this work is to evaluate the challenges involved in improving machinability of the titanium- and nickel-based alloys, and determine the future research direction for productivity improvements in machining these alloys.

The high price of petroleum, overconsumption of plastic products, recent climate change regulations, the lack of landfill spaces in addition to the ever-growing population are considered the driving forces for introducing sustainable biodegradable solutions for greener environment. Due to the harmful impact of petroleum waste plastics on human health, environment and ecosystems, societies have been moving towards the adoption of biodegradable natural based polymers whose conversion and consumption are environmentally friendly. Therefore, biodegradable biobased polymers such as poly(lactic acid) (PLA) and polyhydroxyalkanoates (PHAs) have gained a significant amount of attention in recent years. Nonetheless, some of the vital limitations to the broader use of these biopolymers are that they are less flexible and have less impact resistance when compared to petroleum-based plastics (e.g., polypropylene (PP), high-density polyethylene (HDPE) and polystyrene (PS)). Recent advances have shown that with appropriate modification methods—plasticizers and fillers, polymer blends and nanocomposites, such limitations of both polymers can be overcome. This work is meant to widen the applicability of both polymers by reviewing the available materials on these methods and their impacts with a focus on the mechanical properties. This literature investigation leads to the conclusion that both PLA and PHAs show strong candidacy in expanding their utilizations to potentially substitute petroleum-based plastics in various applications, including but not limited to, food, active packaging, surgical implants, dental, drug delivery, biomedical as well as antistatic and flame retardants applications.

The current drive for achieving the implementation of sustainability concepts in manufacturing calls for sustainable machining practices to be adopted. A key area of research is the search for environmentally benign cooling strategies. Vegetable oils have often been proposed as sustainable alternatives to the conventional synthetic emulsion coolants. Techniques like dry and cryogenic machining, minimum quantity lubrication (MQL) and minimum quantity cooled lubrication (MQCL) have also been proposed. The current study investigates the effect of six different strategies on the flank tool wear, surface roughness and energy consumption during turning of titanium Ti-6Al-4V using uncoated carbide tool at certain speed and feed. The use of rapeseed vegetable oil in MQL and MQCL configuration turns out to be an overall sustainable alternative. Thus confirming the promise predicted in the use of vegetable oil as a lubricant for machining

Titanium alloys generally show low machinability ratings. They are referred as difficult-to-cut materials due to their inherent properties such as low thermal conductivity, high chemical reactivity and high strength at elevated temperatures. Cooling strategies play an important role to improve the machining performance of the cutting process. In order to facilitate the heat dissipation from the cutting zone, generous amount of coolant is used when machining highly reactive metals such as titanium alloys. Generally, cutting coolants are nominated as pollutants due to their non-biodegradable nature. This article presents experimental evaluation of a minimal quantity cooling lubrication system. The study investigates a combination of sub-zero-temperature air and vegetable oil–based mist as possible environmentally benign alternative to conventional cooling methods. The results are compared with the dry and flood cutting environments as well. Machinability was evaluated experimentally by considering the surface finish, cutting forces, tool life and their associated tool wear mechanisms. It was concluded from the results obtained from the surface roughness, cutting force and tool life investigation that minimal quantity cooling lubrication (internal) cooling strategy has encouraging potential to replace the conventional flood cooling method.