Dhanush Bhamitipadi Suresh

Mr. Dhanush Bhamitipadi Suresh

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 October 2020 in Energies
Verified
Journal Article
Open access
PDF file
Emmanuvel Joseph AjuEmmanuvel Joseph Aju
Emmanuvel Joseph Aju
DSDhanush Bhamitipadi Suresh
Dhanush Bhamitipadi Suresh
Yaqing JinYaqing Jin
Yaqing Jin
The objective of this study is to investigate the influence of winglet pitching as an aero-brake on the performance of a model wind turbine by wind tunnel experiments. Time-resolved particle image velocimetry, force sensor, and datalogger were used to characterize the coupling between wake statistics, aerodynamic loads, and rotation speed. Results highlighted that, for a winglet with 4% of the rotor diameter length, the increase of its pitching angle can significantly reduce the turbine rotation speed up to ∼28% and thrust coefficient of ∼20%. The winglet pitching induced minor influence on the velocity deficit in the very near wake regions, while its influence on accelerating the wake recovery become clear around three diameters downstream the turbine rotor. The turbulence kinetic energy exhibited a distinctive increase under large pitching angles in the near wake region at the turbine hub height due to the strong vertical flow fluctuations. Further investigation on the spectra of wake velocities revealed that the pitching of winglet can suppress the high-pass filtering effects of turbines on wake fluctuations; such large-scale turbulence facilitated the flow mixing and accelerated the wake transport.

1 August 2021 in Physics of Fluids
Verified
Journal Article
Closed access
PDF file
DSDhanush Bhamitipadi Suresh
Dhanush Bhamitipadi Suresh
Emmanuvel Joseph AjuEmmanuvel Joseph Aju
Emmanuvel Joseph Aju
DPDat Thanh Pham
Dat Thanh Pham
Yaqing JinYaqing Jin
Yaqing Jin
The incipient sediment suspension downstream of a thin square tab with various inclination angles was fundamentally described using experiments and theoretical arguments. Volumetric particle tracking velocimetry and particle image velocimetry were applied to measure the sediment particle distributions and wake flows under various incoming velocities and obstacle inclination angles. Results show that suspension of sediments occurred downstream of the obstacles due to the enhanced local turbulence intensities. Although the sediment volumetric fraction was mostly determined by the variation of wake turbulence kinetic energy under low inclination angles (i.e., obstacles nearly parallel to incoming flow), this was not the case under high inclination angle counterparts where distinct downward velocities dominated the wake region and suppressed the sediment suspension. This led to the decrease of sediment volumetric fraction with the growth of tab inclination at high inclination angles. Supported by flow measurements, a revised Rouse number was introduced which allows to quantitatively integrate the coupled influence of turbulence mixing load and vertical flows across various incoming velocities and inclination angles.

22 March 2023 in Physical Review Fluids
Verified
Journal Article
Closed access
PDF file
PGPengyao Gong
Pengyao Gong
DSDhanush Bhamitipadi Suresh
Dhanush Bhamitipadi Suresh
Yaqing JinYaqing Jin
Yaqing Jin
The flow-induced vibration of a whisker in the wake of a movable circular cylinder with time-varying streamwise gaps was experimentally investigated to understand how whiskers detect the variation of upstream target's swimming status. A time-resolved particle image velocimetry was used to characterize the vortex flow dynamics and vibrations of whisker across various initial gaps and gap growth rates. Results showed that despite the time-varying gaps, the evolution of vortex flow and whisker dynamics remained overall synchronized. Due to the nonlinear decaying rate of vortex strength along streamwise direction, the vibrations of whisker sensor were more sensitive to gap growth rates with smaller initial gaps. However, the sensitivity of whisker (i.e., the decaying rate of whisker vibration intensity over unit time) to gap growth rates gradually decreased when such growth rate became sufficiently high, regardless of initial gaps. Using a physical model based on the balance between whisker inertial force, system damping, restoring force, and flow loading with time-varying magnitudes, we well described the response of whisker sensor in the cylinder wake flow; the model revealed that the reduction of whisker's sensitivity under high gap growth rate was attributed to the sufficiently strong vortices initiated by the fast movement of upstream cylinder, which compensated the influence of vortex strength decay due to the growth of gap. In addition to cases with whisker vibrating in the wake centerline, our complementary measurements with the whisker in the cylinder edge highlighted the time-varying equilibrium vibration positions of whisker sensor due to the “wake-stiffness” effect.

1 November 2020 in Physics of Fluids
Verified
Journal Article
Open access
PDF file
DSDhanush Bhamitipadi Suresh
Dhanush Bhamitipadi Suresh
Emmanuvel Joseph AjuEmmanuvel Joseph Aju
Emmanuvel Joseph Aju
Yaqing JinYaqing Jin
Yaqing Jin
The distinctive wake characteristics and aerodynamic loads of two side-by-side wall-mounted cylinders were experimentally studied under turbulent boundary layer flows with various gaps. Time-resolved particle image velocimetry was used to analyze the mean and unsteady wake features, whereas a high-resolution load cell was applied to measure the characteristics of lift and drag forces. The results show that the decrease in gap between two cylinders can effectively delay the wake recovery and suppress both the downwash and upwash flows near the top and bottom ends. Overall, with smaller gaps, the turbulence intensity near the top end becomes higher due to the stronger local velocity shear. The distribution of integral time scales indicates that the velocity fluctuations in the near wake region along the middle cylinder span are highly influenced by the local recirculation flows, whereas those near the top end are dominated by the mixing of boundary layer flows. By accounting the equivalent incoming velocity along the cylinder span, both lift and drag coefficient present a similar trend compared to the “infinite length” cylinder cases from previous works. Interestingly, different from cylinders with “infinite length,” no clear intermittency of aerodynamic loads was observed in the current work. This can be attributed to the suppression of two-dimensional vortex shedding due to the three-dimensional flow effects and strong background turbulence. The joint distribution of the lift and drag forces reveals that the lift fluctuations increase significantly with the growth of cylinder gaps, whereas that of drag force remains nearly constant.

2 August 2024 in Energies
Verified
Journal Article
Open access
PDF file
MZMd Rafsan Zani
Md Rafsan Zani
NMNir Saar Maor
Nir Saar Maor
DSDhanush Bhamitipadi Suresh
Dhanush Bhamitipadi Suresh
Yaqing JinYaqing Jin
Yaqing Jin
Motivated by the saturation of drag reduction effectiveness at high non-dimensional riblet spacing in turbulent boundary layer flows, this study seeks to investigate the influence of a secondary blade riblet structure on flow statistics and friction drag reduction effectiveness in comparison to the widely explored single-scale blade riblet surface. The turbulent flow dynamics and drag reduction performance over single- and multi-scale blade riblet surfaces were experimentally examined in a flow visualization channel across various non-dimensional riblet spacings. The shear velocity was quantified by the streamwise velocity distributions from the logarithmic layer via planar Particle Image Velocimetry (PIV) measurements, whereas the near-wall flow dynamics were characterized by a Micro Particle Image Velocimetry (micro-PIV) system. The results highlighted that although both riblet surfaces exhibited similar drag reduction performances at low non-dimensional riblet spacings, the presence of a secondary riblet blade structure can effectively extend the drag reduction region with the non-dimensional riblet spacing up to 32 and achieve approximately 10% lower friction drag in comparison to the single-scale riblet surface when the non-dimensional riblet spacing increases to 44.2. The average number of uniform momentum zones (UMZs) on the multi-scaled blade riblet has also reduced by 9% compared to the single-scaled riblet which indicates the reduction of strong shear layers within a turbulent boundary layer. The inspection of near-wall flow statistics demonstrated that at high non-dimensional riblet spacings, the multi-scale riblet surface produces reduced wall-normal velocity fluctuations and Reynolds shear stresses. Quadrant analysis revealed that this design allows for the suppression of both the sweep and ejection events. This experimental result demonstrated that surfaces with spanwise variations of riblet heights have the potential to maintain drag reduction effectiveness across a wider range of flow speeds.

1 August 2025 in Physics of Fluids
Verified
Journal Article
Closed access
DSDhanush Bhamitipadi Suresh
Dhanush Bhamitipadi Suresh
QDQianxi Deng
Qianxi Deng
SPSaketh Palagummi
Saketh Palagummi
JSJack Shores
Jack Shores
Yaqing JinYaqing Jin
Yaqing Jin
Turbulence statistics and blade deformations of flexible emergent canopies impinged by water flows were experimentally investigated across a range of Reynolds numbers Reb=Ubb/ν (where Ub is the bulk incoming flow velocity, b is the blade width, and ν is the water kinematic viscosity) and blade aspect ratios AR=h/b (h is the blade length). Time-resolved particle image velocimetry was used to characterize both the deformation of flexible blades and the surrounding flow fields. Results showed that the blade deformation increased with the growth of both Reb and AR, with higher blade bending causing stronger variations in vertical profiles of streamwise velocities and Reynolds stresses. The drag produced by the presence of flexible canopies was identified as the dominant fluid loading balancing the pressure gradient. This term exhibited distinctive reduction near the water surface region with high blade deformation due to the large local blade inclination angle. Interestingly, in contrast to fully submerged flexible blades where the flow-induced drag increases monotonously with flow speed, a critical Reynolds number Reb,cri was observed, beyond which drag decreased with increasing flow speed until the blade became fully submerged. This phenomenon was explained with theoretical interpretations, which exhibited reasonable agreement with experimental results. Further analysis of unsteady flow dynamics revealed that Reynolds stress within the canopy was dominated by ejection events due to the absence of shear layer at the top of emergent canopy. Additionally, streamwise velocity spectra indicated that flow fluctuations inside the canopy were governed by periodic vortex shedding from blade.