Structures built on sands worldwide, with shallow foundations, have experienced damage and collapse during and after earthquakes. Two phenomena triggered the collapse: the liquefaction phenomenon and the P-Δ effects. However, current research and practice do not fully understand granular soil behavior during liquefaction and P-Δ effects, as proven by the sum of investigations on physical models, constitutive models, and laboratory testing proposals about these topics. A question appears at this point: what is the relationship between excitation frequency, displacement amplitude, and the triggering of overturning? To cope with this issue, the authors propose to create a physical 1-g model composed of a single-degree-of-freedom oscillator (SDOFO) capable of transmitting cyclic loadings to the soil in rocking vibration mode. The measurement methodology was based on computer vision using OpenCV by Python, which allowed the “free movement” of the SDOFO. The authors use computer vision as a suitable way to obtain displacements and times without sensors placed directly in the physical model. According to the results, it was possible to define an inversely non-linear relationship between frequency, displacement amplitude, and the total cycles required to reach overturning for different effective grain-size (D10).
In soil testing, assessing physical properties is essential for accurately characterizing sands. However, testing results can vary depending on the experimental procedures used and their implementation. A round-robin exercise facilitates the simultaneous analysis of the reproducibility and replicability of the standard methods used to characterize the properties of a specific material. This paper presents the outcomes of the first inter-laboratory testing initiative (i.e., a round-robin exercise) aimed at assessing the results variability of the physical characterization of a sandy soil. Guamo sand, widely utilized in local research and engineering projects in Colombia, was the focus of this study. 11 national academic laboratories participated in the program, conducting seven replicates of grain size distribution, solids specific gravity, and maximum and minimum void ratio tests. The data provided by all participants were analyzed and interpreted using statistical techniques. The results revealed significant differences between the data collected for each physical property, which can be attributed to the intrinsic variability of this sand’s natural origin and to the use of diverse testing procedures. These comparisons offer valuable practical insights into the discrepancies between the testing methodologies employed by the participants for soil characterization, and they constitute a comprehensive database for future research or practical applications.