Multiferroic composites comprising BaCaTiO3 as ferroelectric phase and ZnFe2O4 as ferrite phase with formula (1-x) Ba0.96Ca0.04TiO3–(x) ZnFe2O4 are fabricated by solid state reaction method. XRD results confirm that samples have a tetragonal structure with ferrite phase at room temperature with average particle size of 70–90nm. Dielectric behaviouar shows anomalies for frequency 500 Hz at 254°C and 239°C for x = 0.10 and 0.20 for the frequency 1 kHz anomalies are found at 269°C and 244 0 C for x = 0.10 and 0.20. The retentivity value for x = 0.20 is 0.234 and coercivity 0.119 respectively.
The power conversion efficiency (PCE) of single-junction solar cells was theoretically predicted to be limited by the Shockley–Queisser limit due to the intrinsic potential loss of the photo-excited electrons in the light absorbing materials. Up to now, the optimized GaAs solar cell has the highest PCE of 29.1%, which is close to the theoretical limit of ~33%. To pursue the perfect photovoltaic performance, it is necessary to extend the lifetimes of the photo-excited carriers (hot electrons and hot holes) and to collect the hot carriers without potential loss. Thanks to the long-lived hot carriers in perovskite crystal materials, it is possible to completely convert the photon energy to electrical power when the hot electrons and hot holes can freely transport in the quantized energy levels of the electron transport layer and hole transport layer, respectively. In order to achieve the ideal PCE, the interactions between photo-excited carriers and phonons in perovskite solar cells has to be completely understood.
20 July 2023 in The Journal of Physical Chemistry C
Coupled metallic-wedge nano-plasmonic (CWP) waveguides were predicted as the best building blocks, which can realize ultra-compact and broadband integrated optical circuits (IOCs) due to the localized near-field distributions at the dielectric/metal interfaces. Our simulation results show that the manipulations of the near-field distribution and the near-field modal coupling in CWP waveguides can effectively minimize the power loss by varying the wedge angles, which can avoid the loss from the metallic structure and thereby improving the practical application in IOCs.