The field of wireless communication networks has witnessed a dramatic change over the last decade due to sophisticated technologies deployed to satisfy various demands peculiar to different data‐intensive wireless applications. Consequently, this has led to the aggressive use of the available propagation channels to fulfill the minimum quality of service (QoS) requirement. A major barometer used to gauge the performance of a wireless communication system is the spectral efficiency (SE) of its communication channels. A key technology used to improve SE substantially is the multiple input multiple output (MIMO) technique. This article presents a detailed survey of MIMO channel models in wireless communication systems. First, we present the general MIMO channel model and identified three major MIMO channel models, viz., the physical, analytical, and standardized models. The physical models describe the MIMO channel using physical parameters. The analytical models show the statistical features of the MIMO channel with respect to the measured data. The standardized models provide a unified framework for modern radio propagation architecture, advanced signal processing, and cutting‐edge multiple access techniques. Additionally, we examined the strengths and limitations of the existing channel models and discussed model design, development, parameterization, implementation, and validation. Finally, we present the recent 3GPP‐based 3D channel model, the transitioning from 2D to 3D channel modeling, discuss open issues, and highlight vital lessons learned for future research exploration in MIMO communication systems.
It is crucial to design new communication technologies to surmount the setbacks in RF communication systems. A suitable energy-efficiency scheme helps evade needless energy consumption in wireless communication. Appropriate choice of the most suitable energy-efficiency scheme aids in selecting the most energy-efficient equipment to minimize the expense of energy towards decreasing individual network element energy consumption without affecting their unique features. This review presents the energy efficiency challenges in wireless communication by employing different technologies. The emergence of visible light communication (VLC) provides an energy-efficient wireless communication system despite the various challenges inherent in its adoption that limit its physical realization. This work seeks to harness the potential of the transmission capabilities of VLC while providing an insight into novel practical implementation techniques. The work also addresses the energy consumption problem of low-active components and idle period of active components of base stations by using sleep modes for their systematic turning off and on. The high cost of power supply and the environmental emission of gases from base stations are also addressed by integrating a renewable energy resource into the conventional standalone diesel generators. Overall, the work provides an overview of information necessary for foundational research in energy-efficient resources applied to emerging wireless communication systems.
The performances of various optical multicarrier modulation schemes have been investigated in this work by comparatively analyzing the bit error rate response relative to the signal to noise ratio metric. The machine learning-based multicarrier modulation (MLMM) approach was proposed and adopted as a method to improve the bit error rate response of the conventional schemes. The results showed performance enhancement as the proposed machine learning approach outperformed the conventional schemes. This proposition is therefore recommended for adoption in the implementation of optical multicarrier modulation-based solutions depending on the spectral and energy efficiency requirements of the intended application.
Wireless mobile communication has become the interconnecting technological platform through which seamless services of data, voice and other value added services can be deployed within local, national and global platforms. As a means to integrating smart services, the mobile network must be efficient in terms of coverage and quality of service. This paper therefore investigates large scale propagation models used to predict the signal strength with the aim of providing sufficient data required for radio frequency planning and optimization, which will engender flawless mobile network integration and consequent improved quality of service. Data analysis and optimization was carried out using Root Mean Square statistical tool for which the COST231 model was optimized to ensure proper mobile network planning and improved quality of service.
30 April 2017 in International Journal on Communications Antenna and Propagation (IRECAP)