Mohammed Mahaboob Basha

Dr. Mohammed Mahaboob Basha

Electronics and Communication Engineering, Sreenidhi Institute of Sciene and Technology, Hyderabad, India
orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 May 2024 in Micromachines
Verified
Journal Article
Open access
PDF file
PPPENDLI PRADEEP
PENDLI PRADEEP
Mohammed Mahaboob BashaMohammed Mahaboob Basha
Mohammed Mahaboob Basha
SGSrinivasulu Gundala
Srinivasulu Gundala
JSJaved Syed
Javed Syed
In this paper, an irregular octagonal two-port MIMO patch antenna is designed specifically for New Radio (NR) 5G applications in the mid-band sub-6 GHz. The proposed antenna comprises an irregularly shaped patch antenna equipped with a regular 50-ohm feed line and a parasitic strip line antenna, and is partially grounded. Jeans material serves as a substrate with an effective dielectric constant of 1.6 and a thickness of 1 mm. This material is studied experimentally. The proposed antenna design undergoes analysis and optimization using the ANSYS HFSS tool. Furthermore, the design incorporates the influence of the slot on both the ground plane and the parasitic strip line to optimize performance, enhance isolation, and improve impedance matching among antenna elements. The dimensions of the jeans substrate are 40 mm × 50 mm. The simulated impedance bandwidth ranged from 3.6 GHz to 7 GHz and the measured bandwidth was slightly narrower, from 4.35 GHz to 7 GHz. The simulation results demonstrated an isolation level greater than 12 dB between antenna elements, while the measured results reached 28.5 dB, and the peak gain for this proposed antenna stood at 6.74 dB. These qualities made this proposed antenna suitable for various New Radio mid-band 5G wireless applications within the sub-6 GHz band, such as N79, Wi-Fi-5/6, V2X, and DSRC applications.

9 July 2021 in Concurrent Engineering
Verified
Journal Article
Closed access
PDF file
SKSibghatullah I. Khan
Sibghatullah I. Khan
SCShruti Bhargava Choubey
Shruti Bhargava Choubey
ACAbhishek Choubey
Abhishek Choubey
ABAbhishek Bhatt
Abhishek Bhatt
PNPandya Vyomal Naishadhkumar
Pandya Vyomal Naishadhkumar
Mohammed Mahaboob BashaMohammed Mahaboob Basha
Mohammed Mahaboob Basha
Glaucoma is a domineering and irretrievable neurodegenerative eye disease produced by the optical nerve head owed to extended intra-ocular stress inside the eye. Recognition of glaucoma is an essential job for ophthalmologists. In this paper, we propose a methodology to classify fundus images into normal and glaucoma categories. The proposed approach makes use of image denoising of digital fundus images by utilizing a non-Gaussian bivariate probability distribution function to model the statistics of wavelet coefficients of glaucoma images. The traditional image features were extracted followed by the popular feature selection algorithm. The selected features are then fed to the least square support vector machine classifier employing various kernel functions. The comparison result shows that the proposed approach offers maximum classification accuracy of nearly 91.22% over the existing best approaches.

31 October 2021 in Journal of Nanomaterials
Verified
Journal Article
Open access
PDF file
SGSrinivasulu Gundala
Srinivasulu Gundala
Mohammed Mahaboob BashaMohammed Mahaboob Basha
Mohammed Mahaboob Basha
VMV. Madhurima
V. Madhurima
NPN. Praveena
N. Praveena
SKS. Venkatesh Kumar
S. Venkatesh Kumar
In this article, the photovoltaic thermal collector (PVT) have designed and fabricated using nanoparticle nanofluid. The cause of this is to check out the effect of using water and water-based totally graphene nanoplatelets at an awareness of 0.05 wt% on the performance of PVT structures. Outdoor assessments have been performed at quantity along with the float prices of 0.5 L/min and 1.0 L/min for the aforementioned nanofluids, respectively, using water as a reference fluid. The results that have been analyzed from an active angle confirmed and determined that, graphene water nanofluid achieved higher in phrases of photovoltaic active conversion, than water that might generate the first-class thermal performance sooner or later of the peak period of sun radiation and high mobile temperature. The inclusion of water in the PVT collector increases average daily electrical efficiency by 7.8%, and 8.5%at flow rates of 0.5 LPM and 1.0 LPM, respectively. Furthermore, using water in the PVT collector increases average daily thermal efficiency by 24.9%, and 26.3%at flow rates of 0.5 LPM and 1.0 LPM, respectively.

18 November 2021 in International Journal of Pervasive Computing and Communications
Verified
Journal Article
Closed access
KNKumar Neeraj
Kumar Neeraj
Mohammed Mahaboob BashaMohammed Mahaboob Basha
Mohammed Mahaboob Basha
SGSrinivasulu Gundala
Srinivasulu Gundala
Purpose: Smart ubiquitous sensors have been deployed in wireless body area networks to improve digital health-care services. As the requirement for computing power has drastically increased in recent years, the design of low power static RAM-based ubiquitous sensors is highly required for wireless body area networks. However, SRAM cells are increasingly susceptible to soft errors due to short supply voltage. The main purpose of this paper is to design a low power SRAM- based ubiquitous sensor for healthcare applications. Design/methodology/approach: In this work, bias temperature instabilities are identified as significant issues in SRAM design. A level shifter circuit is proposed to get rid of soft errors and bias temperature instability problems. Findings: Bias Temperature Instabilities are focused on in recent SRAM design for minimizing degradation. When compared to the existing SRAM design, the proposed FinFET-based SRAM obtains better results in terms of latency, power and static noise margin. Body area networks in biomedical applications demand low power ubiquitous sensors to improve battery life. The proposed low power SRAM-based ubiquitous sensors are found to be suitable for portable health-care devices. Originality/value: In wireless body area networks, the design of low power SRAM-based ubiquitous sensors are highly essential. This design is power efficient and it overcomes the effect of bias temperature instability.

18 March 2024 in Electronics
Verified
Journal Article
Open access
PDF file
SGSrinivasulu Gundala
Srinivasulu Gundala
Mohammed Mahaboob BashaMohammed Mahaboob Basha
Mohammed Mahaboob Basha
VMVirupakshi Madhurima
Virupakshi Madhurima
SOStan Ovidiu
Stan Ovidiu
A level shifter (LS) appears to be highly efficient and effective in solving voltage contentions between deep sub-threshold and core voltage levels. An input voltage-level driven split-input inverter that can create common unconnected PMOS and NMOS transistors for the input inverter is proposed, which is powered and used at the input stage to achieve maximum conversion efficiency. Layout and simulation results across different corners have demonstrated that the proposed LS is highly useful for cutting-edge nanoscale applications. It can up-convert voltage from 0.2 V to 1.2 V and down-convert from 1.2 V to 0.2 V @ 1 MHz input pulse, with a level-up or level-down mean switching delay of 1.3 ns, and a power of 9.5 nW. Moreover, the LS occupies an area of 8 μm2, which is a reasonably compact size compared to the typical LS designs. Overall, the proposed voltage LS design is an efficient and effective solution that could have an ample range of applications in IoT and biomedical, wireless sensor networks.

1 June 2020
Verified
Conference Paper
Closed access
SGSrinivasulu Gundala
Srinivasulu Gundala
Mohammed Mahaboob BashaMohammed Mahaboob Basha
Mohammed Mahaboob Basha
SVS. Vijayakumar
S. Vijayakumar
Multi supply voltage design technique is extensively used in modern VLSI designs to tradeoff energy and speed. Level shifters (LSs) are interfacing circuits that allow different voltage domains to be interfaced. This research article proposes a 0.125V- 0.325V input to 1.3V output-voltage Level Shifter that satisfies the requirements of Power, Delay, and voltage level shifting requirements of current IoT applications. The design was achieved using strong current limiters and potency pull down network. The proposed LS was implemented using 130nm technology and incurs static power of 6.6nW propagation delay of 10ns at the level shifting from 0.2V to 1.25V which is appropriate for IoT applications.